Displaying 20 results from an estimated 2000 matches similar to: "DAHDI Missing '/sys/bus/astribanks/drivers/xppdrv/sync'"
2010 Sep 01
2
Freepbx + Asterisk problem - NEED HELP
Hello,
After installing on Ubuntu 10.04 using the tutorial on
http://hmontoliu.blogspot.com/2010/03/installing-asterisk-and-freepbx-on.html
I have a running instance of Asterisk.
PROBLEM: result of dahdi_cfg:
DAHDI Tools Version - 2.2.1
DAHDI Version: 2.2.1
Echo Canceller(s): MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2)
2020 Sep 06
0
dahdi_cfg -vvv error , PRI show spans command not found
dahdi_cfg -vvv error `cut: '/sys/bus/dahdi_devices/devices/pci:0000:01:00.0/spantype': No such file or directory`
PRI show spans --command not found
test call not working.
-- dahdi_genconf -vvv
Default parameters from /etc/dahdi/genconf_parameters
Generating /etc/dahdi/assigned-spans.conf
cut: '/sys/bus/dahdi_devices/devices/pci:0000:01:00.0/spantype': No such file or
2010 May 23
2
Dahdi problems with kernel 2.6.32
Hi. I am having problems with dahdi using kernel 2.6.32. I am using
2.6.30 kernel and it works fine -- here is the output of dahdi_cfg -vv
++ dahdi_cfg -vv
DAHDI Tools Version - SVN-trunk-r8670
DAHDI Version: SVN-trunk-r7445M
Echo Canceller(s):
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 04: FXS Kewlstart
2010 Aug 23
1
Dahdi install gone wrong
The card you installed has FXO or FXS modules in it ????? are you getting
your lines directly from the telco co???
Doug D
On Mon 23/08/10 8:37 AM , Cassius Smith cassius at cassius.org sent:
* -----Original Message-----
* From: Todd Reese
* Reply-to: Asterisk Users Mailing List - Non-Commercial
Discussion
* To: asterisk-users at lists.digium.com [3]
* Subject: [asterisk-users] Dahdi
2009 Mar 10
3
configuring channels for dahdi
after installing asterisk 1.4.23.1 and dahdi-linux-2.1.0.4 and at CLI> module load chan_dahdi.so receive the following:
signalling must be specified before any channels are.
CLI> Warning [4663]: chan_dahdi.c:11627 process_dahdi: Ignoring signalling
Error[4663]: chan_dahdi.c:10946 build_channels: Unable to reconfigure channel '1'
Error[4663]:
2009 Dec 24
0
X100P clone card problem
Hi,
I have problem with X100P clone card.I can not force it to work
under Asterisk 1.4.27.1 and DAHDI Version: 2.2.0.2.
I looked over and over on configuration and could not see any mistakes.
Here are relevant configuration files.
/etc/dahdi/system.conf
> fxsks=1
> echocanceller=mg2,1
> loadzone = hu
> defaultzone = hu
>
dahdi_tool
> OK Wildcard X100P
2009 Apr 11
1
asterisknow 1.5 with X100P and TDM400P
Hi All,
Sorry if this has been around a millions times.. I have been off this
list for a few months now..
I have installed the latest asterisknow (upgraded asterisk to 1.6 as
well) and I am having a hard time getting my X100P and TDM400P working..
Its all new to me with dahdi because my old server is still running
Asterisk 1.0.2 so there have been lost of changes..
Can someone point me in
2010 Jan 14
2
Dahdi issues
Hello,
My first attempt to get dahdi running on 1.4.28... with a Rhino 8 port
modular card and a single FXS module.
Got the Rhino card installed and the machine sees it:
root at pbx:/etc/dahdi# dmesg | grep rcbfx
[ 71.985309] rcbfx 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ
21
[ 71.985440] rcbfx 1: Rhino PCI BAR0 50100000 IOMem mapped at
ffffc90008d7c000
[ 71.985504]
2009 Aug 25
2
Echo
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
I recently upgraded my Asterisk system to Dahdi and now I have an echo
<br>
problem.
<br>
<br>
I am running Asterisk 1.4.25 with Dahdi Complete 2.2.0, on a Digium
<br>
TE121B PCI express
2009 Nov 03
1
dahdi channel not showing up
Hi,
I have a X101P card and am running Asterisk SVN-trunk-r226890. The
X101P card seems to be identified properly:
debian:/usr/src/dahdi-tools# dahdi_hardware
pci:0000:01:01.0 wcfxo+ e159:0001 Wildcard X101P
debian:/usr/src/dahdi-tools# dahdi_cfg -vv
DAHDI Tools Version - SVN-trunk-r7409
DAHDI Version: SVN-trunk-r7445
Echo Canceller(s): MG2
Configuration
======================
2009 Jul 03
0
DAHDI CDR problem
Hello gang,
We just got MaBell to turn on our callerid. I tested the
capability with a southwest bell box and a plain phone, so I know the line
is sending the signal. I'm running Asterisk SVN-branch-1.4-r204834 using a
TDM400P card. Here is my dahdi_cfg -vv output:
dahdi_cfg -vv
DAHDI Tools Version - 2.1.0.2
DAHDI Version: 2.1.0.3
Echo Canceller(s): MG2
2009 Feb 25
4
TE121 on Asterisk
Hello, I just bought a TE121 T1/E1 card, and now trying to install it on a
1.4.23.1 asterisk with dahdi 2.1.0.4
Actually first everything went on well and i managed to see my card on dahdi.
Here's the output:
#asterisk# dahdi_hardware
pci:0000:04:08.0 wcte12xp+ d161:8000 Wildcard TE121
and this is the scan:
--------------------------
asterisk# dahdi_scan
[1]
active=yes
alarms=RED
2009 Mar 15
1
No hardware timing source found in /proc/dahdi
Hello all,
Ok it is Sunday afternoon and I am going crazy. I have been running in
circles so long that I can't think straight. As an example, I sent this
message to the wrong address the first try, AAARRRRGGGGGGHHHHH. I have
Asterisk 1.6.0.6 and DAHDI Tools Version - 2.1.0.2,
DAHDI Version: 2.1.0.4, OpenSuSE 10.3 x86_64, tdm422
at the end of installing dahdi-linux and dahdi-tools I get:
2010 Jan 18
0
TDM2400P "Unable to set SW Companding on channel .."
Hi:
I?Bought TDM2400P ,with 24 FXO ports , I installed? the asterisk 1.4.28 and?dahdi 2.2.0?and then i compiled them and configured all, i pluged into 8 pstn line into the Rj connector and then i got messages on asterisk console that alarm cleared on channels 1->8??, at this step everything should go fine ,but when i try to make a call?through the TDM?there is silence and no audio,and then i
2012 Jun 03
1
Dahdi 2.6.1 with OSLEC support
In order solve my incoming caller ID problem, I upgrade the dahdi to
version 2.6.1 from version 2.4.x. After upgrade, I found the echo
cancellation doesn't working (I'm using Digium AEX800B PCI Express card). I
can hear my self talking on the phone. How to solve this? I think I need to
recompile dahdi 2.6.1 with OSLEC support? how?
[root at callcenter ~]# dahdi_cfg -vvv
DAHDI Tools
2010 May 27
2
BRI card(B800P) doesn's work with DAHDI(wcb4xxp) in NT mode
Dear Supports,
I was attempting to install BRI Card(OpenVox B800P) with wcb4xxp in NT mode .But I can not make it worked!
Could you please give me some hints? Thanks in advance!
Here are my environments:
------------------------------
CentOS-5.3
Kernel-2.6.18-164.el5
asterisk-1.6.1.6
dahdi-linux-complete-2.3.0+2.3.0
libpri-1.4.10.2
OpenVox-B800P(the first port is spliting into
2009 Sep 01
2
chan_dahdi.so fails to load : Inappropriate ioctl for device
Aloha,
I'm not sure why I'm getting this error, but I can't seem to get
chan_dahdi to load. SIP & IAX2 are working fine.
Debian 4 w/ 2.6.28 kernel. Asterisk 1.6.1.5, dahdi-linux 2.2.0.2,
dahdi-tools-2.2.0
CLI> module load chan_dahdi.so
Unable to load module chan_dahdi.so
Command 'module load chan_dahdi.so' failed.
[Sep 1 10:57:51] WARNING[31696]: pbx.c:4550
2014 Jul 14
2
Issue with new Te133
Have a new TE133 in a dell R320.
dahdi_cfg -vvv shows:
DAHDI Tools Version - 2.9.1
DAHDI Version: 2.9.1
Echo Canceller(s):
Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Clear
2010 Jun 16
0
Asterisk +Dahdi does not work with BRI NT
Hi all,
As i tested with Asterisk+dahdi+libpri with openvox BRI with NT mode, the
ISDN phone does not work.
There is the setting and error.
***********************Enviroment*****************************
Asterisk-1.6.1.18
dahdi-linux-2.3.0.1
dahdi-tool-2.30.
libpri-1.4.11.2
CentOS-5.5
OpenVox B400P
******************************************************************
In my case , I set prot 1 and
2010 Jun 17
4
Asterisk + Dahdi does not work with BRI NT mode
Hi all,
As i tested with Asterisk+dahdi+libpri with openvox BRI with NT mode, the
ISDN phone does not work.
There is the setting and error.
***********************Enviroment**********************************
Asterisk-1.6.1.18
dahdi-linux-2.3.0.1
dahdi-tool-2.30.
libpri-1.4.11.2
CentOS-5.5
OpenVox B400P
********************************************************************
In my case , I set prot 1