similar to: libipq and IMQ

hi all, i have applied all patches and compiled the kernel (2.4.21), iptables (1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run "modprobe imq numdevs=1", the system returns - imq.o: init_module: Device or resource busy the transcript is below - [root@vmlinux project]# modprobe imq numdevs=1 /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device or resource busy

I want to use snort inline for ips and imq for bandwidth shaping When i have inserted imq module ip_queue module insertion giving error Is it possible to use both at the same time -- Failure seldom stops you. What stops you is the fear of failure. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

hi all, i want to try htb3 with imq downloaded & patched imq & htb3 with kernel-2.4.18 on rh7.2 but got STUCK on step 1 :( this are what i did can anyone guide me what went wrong on the first step itself !! [root@cab1 root]# modprobe imq numdevs=1 modprobe: Can''t locate module imq [root@cab1 root]# [root@cab1 root]# tc qdisc add dev imq0 handle 1: root htb default 1 Cannot find

Hi, I''m trying to configure IMQ to work on the same machine with frottle (http://frottle.sourceforge.net). The problem is both feed themselves packets through netfilter queueing mechanism, but currently there can only be one netfilter queue per protocol family. To explain why I need IMQ in the first place I have to explain what frottle does. It is a deamon that tweaks the behaviour of a

HTB and imq was used to control traffic. modprobe imq numdevs=3 but only imq0 and imq1 can be used; if there are five NICs, please tell me how can I can use imq2 , imq3 and so on. _________________________________________________________ Do You Yahoo!? 新鲜到底,娱乐到家 - 雅虎推出免费娱乐电子周报! http://cn.ent.yahoo.com/newsletter/index.html _______________________________________________ LARTC mailing list /

Hello, Some time ago I''ve read somewhere that local traffic in IMQ could hung up the whole system but it was corrected long time ago. So I was very surprised yesterday when it occurred not true. While testing IMQ I''ve observed for some time that - if you tag some local traffic with iptables both in pre- and postrouting - kernel is hunging up. It is happening quite quick with

Is IFB realy replacement of IMQ Please Guide -- Failure seldom stops you. What stops you is the fear of failure. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Hi, i tried to insmod the imq.o module from http://pupa.da.ru/imq after a successful compile, but it thows this error: > insmod imq.o imq.o: unresolved symbol nf_unregister_hook imq.o: unresolved symbol nf_register_hook I think I have some kernel options disabled, does anyone know which one(s)? Thanks cord _______________________________________________ LARTC mailing list /

Hi all and tc Gururs i have patched the IMQ and htb to kernel, but when i do egress filtering, iam not able to see any traffic and excusted the following the commands modprobe imq numdevs=1 tc qdisc add dev imq0 handle 1: root htb default 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 100kbit tc qdisc add dev imq0 parent 1:1 handle 10: htb default 1 tc class add dev imq0 parent

Hi All, I am adding ip_queue module for snort inline IDS. I am using snort2.4.0 And iptables-1.3.4. Userspace Queuing(queue target) is enabled. It is built-in and not built as a module. The output of /proc/net/ip_queue is shown below: cat /proc/net/ip_queue> Peer PID : 0 Copy mode : 0 Copy range : 0 Queue length : 0 Queue max. length : 1024 IPTABLES 1.3.4 is

Hello, I wrote a simple traffic shaping script (below) that should have allowed me to shape my internet traffic a bit (ppp0 - adsl 128kbit/64kbit; local interface eth0). The script works only partially - the speed is being limited but too much. Without running this script my download rate is about 10kBytes (with second computer also downloading at about 6kBytes). After running it my download speed

Hi! I have read all informations i could find, but some things are still not clear. My setup is: ---INTERNET1(eth0)-\ /- Local net1 (eth2) GW ---INTERNET2(eth1)-/ \- Local net2 (eth3) I have NAT and a working setup using HTB,SFQ, classifying with the iptables -j CLASSIFY way. I shape only the traffic coming from the internet heading to the intranet. I would like

Hello there! I was reading this archive: http://mailman.ds9a.nl/pipermail/lartc/2002q3/004725.html It was almost two years ago when Patrick wrote a patch to switch IMQ with nat in PREROUTING chain... From www.linuximq.org I''ve downloaded newset IMQ driver for 2.4.26 and what can i see? The line that Patrick changed in that patch is still as it was in previous relases. Are there

Hi Guys, I''m trying to compile IMQ with kernel-2.4.26 and iptables-1.2.9 and I want to know is this procedure is correct: ---------------------------------------- - In Kernel 2.4.26 Directory (/usr/src/linux) # cd /usr/src/linux # wget http://www.linuximq.net/patchs/linux-2.4.24-imq.diff # patch -p1 < linux-2.4.24-imq.diff - In Patch O Matic Directory

I have a linux box with kernel 2.4.22 and iptables 1.2.9 First, i patch linux kernel with Norbet Buckmuller''s .diff #cd \usr\src\linux #patch -p1 < imq-combo-debian-2.4.22.diff All correct Second, i -try to- patch iptables (following www.linuximq.net/faq.html) #cd /usr/src/linux/net/ipv4/netfilter I edit IMQ.pom-ng.patch and replace $KERNEL_DIR with /usr/src/linux #patch

hi, I''ve successfully implemented shaping and policing with HTB for my SDSL line. Some tips&tricks I discovered which were not covered in the FAQs and docs I read: - To discover the appropriate rate for your line, flood it with traffic and reduce the rate until the matching class starts to show a consistent backlog -- only then you''ve managed to take the queue away

Hello I''m trying the excelent IMQ patch for iptbles and kernel 2.4.21 and works very well... but, there is a IMQ patch for 2.4.24 ? I''ve tested IMQ for kernels > 2,4,21 but patch fails ! Best regards andres _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi stef; imq patch of 2.2.17 form http://luxik.cdi.cz/~devik/qos/imq.htm diff against 2.2.17 Can you tell me how imq work with ipchains? thanks for your help regards, haipe _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hello All Its first time i posting to this mail list :). I have done something (maybe) important. I write new IMQ device driver based from Martin Devera and Patrick McHardy implementation with device EOS support. My current implementation supporting only egress trafic shaping and kernel 2.4.25. For more details, source and examples have look at my page http://hyperfighter.jinak.cz/qos Ill

Hi all, I want to divide the incoming traffic between what should go to the firewall and what should be forwarded to the local network behind it. I started with the IMQ example config, but added an extra htb class right below "10:1" to get the two sfq''s to borrow each other''s bandwidth. However, I can''t figure out how to set the two marks. According to this