similar to: Re: HTB: quantum of class 10200 is small. Consider r2q change.

Hi, I have this message in my syslog: HTB: quantum of class 10001 is big. Consider r2q change. I don''t know why it''s there. I think all my setup is right. I am shaping traffic from my web server. It lives at three IP addresses, first is fast (and most important - aaa.bbb.ccc.1), second slower (aaa.bbb.ccc.2), third slowest (aaa.bbb.ccc.3). Total bandwidth is 2700kBps. Other

hi. When I execute follow class setting qdisc 1:0 root htb default 2 parent 1:0 classid 1:1 htb rate 10Mbit ceil 10Mbit parent 1:1 classid 1:2 htb rate 10kbit ceil 100Mbit HTB: quantum of class 10001 is big. Consider r2q change. <7>htb*g j=1014xxxxx HTB: quantum of class 10001 is big. Consider r2q change. <7>htb*g j=1014xxxxx HTB: quantum of class 10001 is big. Consider r2q change.

Salut lartc (lartc@mailman.ds9a.nl), 18:12:52 kernel HTB init, kernel part version 3.10 18:12:52 kernel HTB: quantum of class 100001 is small. Consider r2q change. 18:12:52 kernel HTB: quantum of class 100002 is small. Consider r2q change. 18:12:52 kernel HTB: quantum of class 100003 is small. Consider r2q change. 18:12:52 kernel HTB: quantum of class 100004 is small. Consider r2q change.

Hello Stef, I am working on a Bandwidth management project as part of my college curriculum.I am running TCNG 10-b but I am not able to classify packets based on MAC address using tcng, so I am running tc commands in /tcng/bin and they are working. But is there a way out to classify packets based on MAC address using TCNG. And, I am successful in throttling down the Bandwidth to 8kbit

hello, i have a config that is with a large domain of rate, from 2kb to 40Mb and i have some problems with i don''t know how to deal with. so here are some classes 2 with q=1000, one with q 200000 and one with q=6400, all have been calculated by htb, in the code i speficien just rate,ceil, no quantum, no r2q, no bursts ($tc class add $IF_INT parent 1:2 classid 1:21 htb rate

Hello! One simple question regaring htb2->htb3 way. I''m using 2.4.25 kernel with tc3 from Devik''s site, RH9. My data flow is about 100Mbit duplex and is subject to grow, so I''m creating root class with 200Mbit rate, with r2q=10, quantum = rate/r2q, and 1500 < quantum < 200000 (sch_htb.c) with such r2q my default shaping window will be from 120Kbit to 16Mbit,

I'm afraid that I am at a loss here. I am new to Asterisk, and have successfully set up SIP. But I cannot get my FXS card working, and I'm not sure what else I can try. # modprobe wcfxo /lib/modules/2.4.21-37.0.1.ELsmp/misc/wcfxo.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may

Hi, I would like to ask concerning problems after installing xen 3.3 on Centos 5.2 I use 2.6.18.8-xen (xen3.3.1 testing - installing with mercurial). After done with make world and make install, I did mkinitrd and placing it in /boot changing the grub and reboot.. succeded I do not install libvirt and the domUs from the previous xen 3.0 (built-in Centos 5.2) are NOT able to start : [root@wing

Hi folks, Backing up a host as noted below im getting over and over again the same issue on actual kernel, details: - Backup host has a pci/usb2.0 card, with a 250gb usb 2.0 disk attached, - Celeron 900 family - Remote host, local console from boot linux rescue: # dd if=/dev/hda conv=sync,noerror | ssh -c blowfish root at 192.168.0.6 "dd of=/media/backup/vol-hda.raw.img" - Backup

After a couple hours last night.... doing a "killall -SIGUSR1 cpuspeed" bumps up the /proc/cpuinfo information for cpu mhz to 2393 Mhz. I did notice a little increase after that. However, the machine is still sluggish. I did a "hdparm -c 1 /dev/hda" but really did not notice any difference. I tried to download fglrx64_6_8_0_8.16.20-1.x86_64.rpm from ati (also 8.20.8) and get

Hi I have a clean CentOS 4.4 disk and I have setup a RAID 1 with two IDE disk. The system RAID 1 boot fine but when I disconnect a disk (the first disk) the system not boot. The screen goes black and not boot anything (grub not boot). Can anybody help me ? What I doing wrong ?? Excuse my english .... My setup is: df S.ficheros Bloques de 1K Usado Dispon Uso% Montado en

Hi, My system always complain with the warning below : HTB: quantum of class 10099 is small. Consider r2q change. I simply do not understand why... Below my tc commands : /sbin/tc qdisc del dev eth0 root /sbin/tc qdisc add dev eth0 root handle 1 htb default 99 /sbin/tc class add dev eth0 parent 1: classid 1:2 htb rate 128Kbit /sbin/tc class add dev eth0 parent 1:2 classid 1:10 htb rate 80Kbit

Hi I got the 2nd Gen firmware upgraded on the TE405P. I recompiled after putting in the upgraded board but did not change any conf, but the spans become active but will not come up. I guess I am missing something or are the any changes to the zaptel/libpri software that is required. I cannot find any info about this or does this new firmware only work with latest CVS. I am using 1.0.9 with

Hi, I''m getting this warning/error in /var/log/messages: May 26 18:21:05 mail kernel: HTB: quantum of class 10010 is small. Consider r2q change. Its a big deal? What should I do? Many thanks Oliver -- Oliver Schulze L. <oliver@samera.com.py>

So I just finished doing a fresh install of CentOS 6.3. The machine has three ethernet ports in it: one on the motherboard (VIA Rhine), and two add-on cards, an Intel Pro100 and an old SMC1255TX. When CentOS comes up, this is what I see in the dmesg output: # dmesg | grep eth e100 0000:00:08.0: eth0: addr 0xf6043000, irq 16, MAC addr 00:02:b3:be:02:87 eth1: ADMtek Comet rev 17

Dear Xen Users, I have a rhel5 dom0 machine with four nics, two public and two private. My goal is to run two xen instances, a fully virtualized rhel4(with a custom kernel, hence the fully virtualized) and a paravirtualized rhel5. Each instance will need one public and one private nic with gigabit connectivity. At the moment I''m simply bridging two nics to each instance. Is this the

DATIC (www.datic.uconn.edu<http://www.datic.uconn.edu>) is offering 4 workshops at the University of Connecticut in June, 2018: Mixture Modeling, Introduction to Data Analysis in R, Multilevel Modeling in R, and Dyadic Analysis with R. Registration is now open. Go to www.datic.uconn.edu<http://www.datic.uconn.edu> for more information and to register for the workshops. Mixture

Colleagues ---------------------------------- System info: Version 1.3.0 (2001-06-22) on NT ESS v. 5.1.18 using emacs ver. 20.4 ---------------------------------- I have generated an object (class = by) with NA values and want to plot the output as a bargraph: x2 <- by(scl.nos, species, sum) These data are summed counts of fish by species > x2 INDICES: AGI [1] 0.729927

I'm getting an INVITE from the Cisco softswitch looking like this (from sip debug trace): Sip read: INVITE sip:9043940358@206.165.120.52;user=phone SIP/2.0 Via: SIP/2.0/UDP sia-ATLCA146.telefyne.com:5060;branch=z9hG4bK_1146_38l5 From: <sip:7278673170@sia-ATLCA146.telefyne.com;user=phone>;tag=1_1146_f153592_732 j To: <sip:9043940358@206.165.120.52;user=phone> Call-ID:

Hello again, I need to change the R2Q for my script, as setting the quantum manually for each class is painful. Can you tell me exactly where to set R2Q = x? I get syntax errors all the time. Should it be specified for each class? I do not know where to place this setting... Thanks in advance, Vlad Mihai