similar to: Why i would have to use IMQ on postrouting?

Hi to all I am studying HTB on LARTC how to. I realize a simple configuration on router: tc qdisc add dev eth0 root handle 1: htb default 30 tc class add dev eth0 parent 1: classid 1:1 htb rate 3mbit burst 15k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 2mbit burst 15k tc class add dev eth0 parent 1:1 classid 1:20 htb rate 1mbit burst 15k tc qdisc add dev eth0 parent 1:10 handle 10: sfq

Hi all, Can someone say me the theoretic way of packet in the kernel. When the packet will be send to a IMQ device? When the packet arrives to post routing time? When operation of NAT occur? befor or later that the packet will send to net device? Thanks Bye Simone -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Problemi di Liquidità? Con Logos

Hello, Sorry for the many Ccs, but I hope to reach all parties involved. I want to do traffic shaping with NAT and I wanted to do it with IFB instead of IMQ [1]. I tried a lot of things but now I am stuck (and maybe confused). The setup: eth0 eth1 WAN/(Internet) <-> Linux Router <-> LAN Linux router: - does NAT for the LANs - runs local processes

I am a newbie, where the heck do I start?

Hi, I have typical situation, local LAN with private addresses, translated via NAT to internet. I need to shape ingress traffic (from internet to local LAN) in several HTB queues accorting to destination (private not public) IP. So I need mark packets to divide them to corresponding queue. According to http://www.docum.org/stef.coene/qos/kptd/ I thing I have only one way how to do it, because

Hi, I've a question about the syntax of the valid users option. Any help is greatly appreciated! Here is the Background: samba 3.0.4 Linux as Domain Member Active Directory, not in Native Mode Compiler opions: --with-winbind --with-pam --with-smbmount The goal is to authenticate via the Windows Domain and allow access via Windows groups. The syntax in my smb.conf looks like this:

Hello all I need your support in a big decision in front of two alternatives related with *. I must buy an E1, in order to manage 30 channels, given this big price; or I could opt for a 15 BRIs without cost to replace the same number of channels, and the question that inmediatly emerge is : ? can asterisk manage 15 BRIs ? If yes to the latter, could posible somo guide, for instance, wich Digium

I apologize, but I can not find a complete list of directives in dovecot.conf possible. where can I find? thanks excuse my for my orrible english -- Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP autenticato? GRATIS solo con Email.it http://www.email.it/f Sponsor: Apri Conto Corrente Arancio entro il 28 febbraio 2011 e ricevi 100 euro da spendere su Media

I would have to buy a new UPS that have to function for a simple desktop PC. I would the best about NUT compatibilty. The class of UPS must be 600-800 VA. What do you recommend me? Best regards Hello to all. -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Natsabe.it la più grande erboristeria online italiana * prezzi bassi tutto l'anno !

Hello there, Can someone please explain why do one neeed IMQ ? I can already shape incoming traffic on my nat router by creating qdiscs on LAN-side interface. I have done some tests, whith simple bandwidth limmiting, and it works. I''ve read just about all the stuff on www.linuximq.net ... but couldn''t make myself an ideea on why would someone need IMQ for ingress policing ...

I have a matrix of values... for exemple the matrix could be 100 rows and 50 columns... I would like to resample the matrix to obtain a new matrix -> a 10x5 matrix So i need to calculate a new value for every cell, i would like to use a weightened mean to do this. I explain this thing better: In the exemple the original matrix would be divided into 50 partial-matrix, for every partial-matrix

List: Please suggest fax server software for Corporate use with CentOS...requirements...centralized, multiple modems, if required, scriptable for pre/post fax actions with perl/shell scripts, if possible compatible for faxing from open office and maybe M$ Windoz. Most necessary open source, free, being actively maintained & active mailing list. Best regards. Sanjay.

Hi, I've been searching a solution for this with no luck for the last 5 days, so I thought I'd finally need help. We have a ADS primary domain, samba 3.0..4-6.3E on RHEL as a domain member. The parent domain say MEDIA.COM has a child domain CHILD.MEDIA.COM. People from the parent domain can access tha shares with no problem , but I can't find a way to make users from the child

Hello there! I was reading this archive: http://mailman.ds9a.nl/pipermail/lartc/2002q3/004725.html It was almost two years ago when Patrick wrote a patch to switch IMQ with nat in PREROUTING chain... From www.linuximq.org I''ve downloaded newset IMQ driver for 2.4.26 and what can i see? The line that Patrick changed in that patch is still as it was in previous relases. Are there

Hi I''ve a stupid question. How can I shape upload using IMQ? Instead of putting a rule in iptables in PREROUTING should i use POSTROUTING? And another question is, can I make routing rule based on ip addresses assigned by iptables to an imq device? The idea is, let''s say i have some rules in iptables like: -t mangle -A PREROUTING -s 192.168.0.0/16 -j IMQ --todev 0 Can i route

hi all, i have applied all patches and compiled the kernel (2.4.21), iptables (1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run "modprobe imq numdevs=1", the system returns - imq.o: init_module: Device or resource busy the transcript is below - [root@vmlinux project]# modprobe imq numdevs=1 /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device or resource busy

Hi, i tried to insmod the imq.o module from http://pupa.da.ru/imq after a successful compile, but it thows this error: > insmod imq.o imq.o: unresolved symbol nf_unregister_hook imq.o: unresolved symbol nf_register_hook I think I have some kernel options disabled, does anyone know which one(s)? Thanks cord _______________________________________________ LARTC mailing list /

ive got such network: |--------| |-------------| | WORLD |---|ROUTER/server| ------ NATED LAN |--------| |-------------| I want to use imq on ROUTER, what behaviour to choose ? AA, BA, AB, BB ?? --

I have a linux box with kernel 2.4.22 and iptables 1.2.9 First, i patch linux kernel with Norbet Buckmuller''s .diff #cd \usr\src\linux #patch -p1 < imq-combo-debian-2.4.22.diff All correct Second, i -try to- patch iptables (following www.linuximq.net/faq.html) #cd /usr/src/linux/net/ipv4/netfilter I edit IMQ.pom-ng.patch and replace $KERNEL_DIR with /usr/src/linux #patch

Hi all, I have read the larc howto and I need to apply a traffic shaper with this configuration: router / two interface etho and eth1 lan lan is on eth1 and on eth0 I''ve the dsl connection (1.2 Mbit / 256 kbit) I need to limit the bandwith towards lan and I''ve thought at HTB and tcng. I write the script belove. I want limit the p2p and ftp (ssh and irc) connection at 15