similar to: DST offset

After palying around to set this correctly (or so I think, please correct me if I got something wrong) I decided to share it with everyone. For Polycom phones in sip.cfg change the following line from: <SNTP tcpIpApp.sntp.resyncPeriod="86400" tcpIpApp.sntp.address="" tcpIpApp.sntp.gmtOffset="" tcpIpApp.sntp.daylightSavings.enable="1"

Tried to submit this email this morning and didn't see it in the list. I apologize if it is a dupe. I've inherited a customized Asterisk installation. After the past time change all clocks in my office are behind by one hour. After some digging it appears we have: A /tftproot/sip.conf that is being pushed out to our phones. I found the following line that seems to be what controls

I have a polycom 501 phone that is 1 hour off now. Before last sunday (time change) the time was fine. <?xml version="1.0" standalone="yes"?> <PHONE_CONFIG> <OVERRIDES _.0x20._log.level.change.sip="0" tcpIpApp.sntp.daylightSavings.stop.date="4" tcpIpApp.sntp.daylightSavings.stop.month="11"

Hi all, I've been pulling my hair out for two days over this problem... I did *a lot* of Googling around, I searched the list archives to no avail - no one has the same problem! I have two Avaya 4610sw phones. I installed the latest SIP firmware using the TFTP server. So far everything looks good. Each time the phone boots, it retrieves the 46xxsettings.txt from the TFTP server. My problem

I am ready to pull my hair out. I cannot seem to get the Polycoms to read the time properly. Regardless of the server they are pointed to our the offset, i am getting the correct time, but 24 hours ahead. So for today it is showing Friday April 28 but with the correct time. Any clues? Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider

Any Polycom gurus out there? If so, I have a few config file questions. First off, does anyone have the daylight savings time rules written for this Sunday's big change? Secondly, if there any way in the config file to tell the phone not to display the number of missed calls? I don't mind it keeping the missed calls list, I just don't want that running count. Lastly, I am trying

Hi all - This isn't really directly Asterisk related, but has anyone successfully set up a Polycom phone to register two lines on two different Asterisk boxes? I can get the first line to register, but the second one does not. I can still place calls from that second line, which indicates to me the server, user, and secret are correct. I'm running the newest 2.6 series firmware with the

I am getting to my wits end with these phones (and so is my boss). I am getting an random echo on these phones and I have an issue opened with Polycom and its been in their research and development department for almost a month with no results. I have noticed that I get a message "RFC3389 support incomplete. Turn off on client if possible" in asterisk. I have researched this and made

My Polycom phones are displaying time, off by one hour. Seems they are on the old DST rules. How do I fix this? joe a.

Is there a R-package with a function that returns me the timezone, if I hand over longitude and latitude? I know online services like http://ws.geonames.org/timezone?lat=-38.01&lng=147 and http://www.earthtools.org/webservices.htm#timezone and wodner if this exists for R too. Thanks for helping, thomas

Right-- I've seen the Avaya document you cite below. It says "To administer DHCP option 242, make a copy of an existing option 176" but I don't have any example of option 176 or 242 to copy, and don't know what to do to /etc/dhcpd.conf to make it offer option 242. Then there's this long table of parameters to use with (presumably) option 242. I was hoping someone had a

I'm running SIP 1.5.2 firmware with a 2.6.2 bootrom on a mix of Polycom 500s and 501s. I'm having a problem with NTP and I'm not sure if it's a configuration issue or a bug in the firmware. I've got the NTP server and GMT offset set in sip.cfg. However, not all phones are in the same timezone. I was under the impression that I could override the offset on a per-phone basis

ive got asterisk running with chan_sccp and three cisco phones (2 7910's and 1 7960). lots of bugs. when i press the speed dial button on either 7910, asterisk dies. also, if i dial from the 7910 to 7910, everything works fine. i can dial from or to the 7960 once, and then one of the 10's and the 60 die and try to reregister. if i take the 7960 out of the mix and remove its

Has any one ever worked with placing idle display images onto the Polycom SPIP331 phones? I have got it working but when the image is displayed the clock is moved to the top of the screen. That is great but it scrolls between the clock and the registered extension(s) . Has anyone figured out a way to stop the scrolling and just display the time? If so could you provide me the configuration

I have a call queue that rings about 15 users and they are wanting to set it up so that the last person to answer a call doesn't ring on the next incoming call. What would be the best way to handle this? I have been looking at the strategies and none of those seem to be right for this. My current thoughts are probably a macro that places a penalty on the user tell the next call is answered.

Hi, Does anybody knows how to get this work? I have been searching all over and can?t find the way. Using chan_sccp tge phone can log in and has line tone. But the problem is that it is not able to receive nor dial out. Any help would be apprecieted. Thanks Javier --------------------------------- Sell on Yahoo! Auctions - No fees. Bid on great items. -------------- next part

Hi, This is a message I already posted on the chan_sccp mailing list, but since this list has a lot of active members, I'm hoping someone might be able to help (And my problem is * related, so I guess it's ok if I post it here also ;) ). I'm trying to get SCCP ATA188s to run with Asterisk. The Asterisk box uses the latest Asterisk@Home image (Version 2.6). I have compiled and

Hello everyone I wonder if anyone can point me to the library for timezone management with DST support, which has timezones, like flickr has. I know that there is TZInfo, but it''s a bit different for it has huge list of available timezones in ''Continent/City'' format. I would like my application to have timezones list more like on flickr (or windows regional settings) -

There appears to be a pretty serious router bug in kernel 2.6.8. One reference to it is here: http://www.debiantalk.com/_Bug279666_kernel-image-2_6_8-1-k7_Runs_out_of_network_buffers-10116882-5788-a.html and a followup that it may now be fixed in later kernels here: http://lists.debian.org/debian-kernel/2004/12/msg00233.html. This is my personal experience with it.... My router fails few

hi again list, first off thanks for the tips roy. here my question. i''m using ip based classes in my htb config. i would like to give some people (eg 192.168.0.20) 4mbit but only if he downloads from certain ip classes. i have my iptables marking those classes with 1 for upload and 0 for download. and finally the question: what''s the appropriate tc (or maybe iptables) command