similar to: Trouble with call pickup using RPID with Cisco

We have an inbound PRI connected to our Cisco 3825 router which is then passing the calls to Asterisk as SIP calls. We're getting the CallerID number but not the CallerID name. We are seeing the name in the RPID field with a SIP trace on the Asterisk box but don't understand why it's not registering as the CallerID name. Here is a link to pastebin with the Sip trace. In it you

Hello, I have Asterisk 1.6.2.9-2, the directive "sendrpid" does not work! I placed this in my peer: (sip.conf) sendrpid=yes trustrpid=yes or sendrpid=yes trustrpid=no (and restarted Asterisk) and the line "Remote-Party-ID" does not appear in my sip debug! Please help me, Mickael. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi everyone, I am trying to figure out the behavior of trustrpid Basically its not behaving the way I expected it to or maybe I am missing a configuration option or something else. When a call from a phone is sent to the * box it has the following sip headers: From: "From Phone" <sip:1001 at 10.0.0.29>;tag=4bf4bb4e11e92476. Remote-Party-ID: "Cloutier"

Hello, trying to implement srtp with already working tls i somehow stuck with srtp. If the extension has successfully registered a call from asterisk to that extension works fine. But the other way round nothing happens. [Aug 13 14:54:16] WARNING[31053]: chan_sip.c:3906 __sip_xmit: sip_xmit of 0x7fc8880467e0 (len 609) to 123.456.789:36785 returned -2: Success [Aug 13 14:54:20] NOTICE[31053]:

All, I have multiple Asterisk servers in various locations running various 1.4 and 1.6 versions (lab and production) and am having trouble with a new Aastra 6739i (3.0.1.2015) registering. Below is my request to support and they have looked it over and don't see anything wrong: Support, Can not get a 6739i to register with 3 different Asterisk servers with varying configurations/versions

Hello everybody I'm trying to enable the Digium res_fax app at my *11.7 Server. a fax show stats comes up with FAX Statistics: --------------- Current Sessions : 0 Reserved Sessions : 0 Transmit Attempts : 0 Receive Attempts : 1 Completed FAXes : 1 Failed FAXes : 1 Digium G.711 Licensed Channels : 1 Max Concurrent : 0 Success : 0 Switched to

Hello all If I look at the sip peers table definition as provided with the source of asterisk-1.8.23.0/ (looking at contrib/realtime/mysql/sippeers.sql) for the sendrpid column it's an enum with 2 possible values, yes and no. However, the sip.conf allows 4 values, no, yes, rpid and pai. Is this discrepancy an oversight? Is it possible to set the system default to pai but an individual peer

Hello, Did anyone manage to force asterisk to put Remote-party-ID attribute on the SIP outgoing call? I.e. When A calls B, I want that A gets a name of B displayed on his phone. Note that name of A gets displayed on the B's phone fine, but this is not what I want. This works with Cisco Call manager fine - the RPID is sent as a part of the response to the SIP INVITE this way: SIP/2.0 180

Greetings, I've noticed a problem that might originate from my Asterisk configuration, could use a hand in sorting it out. Problem is a 488 response from Asterisk whenever it gets RTP/SAVPF profile in the SDP. My current setup has Asterisk Kamailio realtime integration, and Kamailio uses dispatcher to route calls for Asterisk to handle. Now I have only one Asterisk, on the same machine as

Gentlemen, I have 3 faxes attached to an Asterisk. Fax - SPA2102 - Asterisk. 0851711201 and 0851711290 is on our WAN, no NAT. 0197673581 is outside our WAN and needs to be NAT'ed. Sending a fax from 0851711201 to 0851711290, no problem, switches to T38 and fax goes through. Sending a from 0197673581 to 0851711201, no problem as long as i dont enable T38 on 0197673581. But, if i enable T38

Hello Everyone, Our switch is sending P-Asserted info to asterisk however the information is getting removed when asterisk forks the call. Is it possible to have asterisk retain the P-Asserted on the leg. This is quite important for valid functionality of our network. Tried setting `sendrpid = yes` and still same problem. We really don't want to have to `SipAddHeader` as it is already being

I have two Asterisks connected using SIP. One is acting as a SIP "server", the other as a SIP "client". This almost works; but calls from 50607795 are rejected with this error: check_auth: username mismatch, have <50607796>, digest has <50607795> On the "client" I have these accounts configured in sip.conf: register => 50607795:test at

Hello, I have 2 asterisk servers that are not working well together. One is acting like a registrar (PBX01) for all my PAP2's and other SIP/IAX devices. And the other is acting like my sip gateway (PBX02) to various providers. They are both on a private network and should be trusting each others IP 100%. But the PBX02 challenges PBX01's requests all the time even though

On Fri, 26 Jun 2015, Ludovic Gasc wrote: > 1. What's the "official" notation of each line: "=>" or "=" ? In the > wiki of Asterisk, I see very often "=>", however, what's the reason for > both syntaxes authorized ? Historical ? I'm not 'official,' but I have a strong preference for just '=.' Using

Hi, Is it working for anyone? I have tried with trustrpid=yes sendrpid=yes/pai but can not get it working, Asterisk cli shows prevented message like this. Connected line update to SIP/1231-00000200 prevented Regards, Zohair Raza -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I am running Asterisk 1.4 with the RPID patch (8824) in order to display the name of the *called* person. It works on Cisco and Polycom phones, but not on SNOM. The local SNOM dealer claims that he saw it working, but he cannot give me more details. Has anyone managed to make it working? Thanks, __Yehavi: -------------- next part -------------- An

Hello, I am looking for a softphone which supports RPID (displaying the called party name) and BLF features. I couldn't find one so far... Any idea whether such a softphone exists? Thanks! __Yehavi: -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm trying to figure out how calls are ending up in my default context (which should never happen). I've got a Cisco 1760V with a VIC-2FXO-M1/VIC-4FXS and 5 Cisco sip phones. When I make a call from one of the FXS ports on the 1760, the call goes into asterisk's default context instead of where i think i'm directing it. Can someone tell me what I have misconfigured? 1760

2015-06-26 17:11 GMT+02:00 Steve Edwards <asterisk.org at sedwards.com>: > On Fri, 26 Jun 2015, Ludovic Gasc wrote: > > 1. What's the "official" notation of each line: "=>" or "=" ? In the wiki >> of Asterisk, I see very often "=>", however, what's the reason for both >> syntaxes authorized ? Historical ? >>

I upgraded from a perfectly working 1.6.2 asterisk installation (including fax via app_fax_digium) to 1.8.0 this evening. All my custom modules (including swift <thanks darren!>) are working fine except for fax. When a caller connects, asterisk switches to the fax context and hangs up the call. i've captured with: core set verbose 10 core set debug 10 fax set debug on sip