I upgraded from a perfectly working 1.6.2 asterisk installation (including fax via app_fax_digium) to 1.8.0 this evening. All my custom modules (including swift <thanks darren!>) are working fine except for fax. When a caller connects, asterisk switches to the fax context and hangs up the call. i've captured with: core set verbose 10 core set debug 10 fax set debug on sip set debug peer vgw1 (vgw1 is my cisco 1760 ata) http://jeremy.kister.net/tmp/fax/console.txt http://jeremy.kister.net/tmp/fax/messages.txt http://jeremy.kister.net/tmp/fax/sip.txt I've tried using the packaged app_fax_spandsp and also Digium's app_fax_digum for 1.8.0-rc1 -- no difference in behavior. Anyone have any ideas how I can get this fixed? -- Jeremy Kister http://jeremy.kister.net./
On 11/13/2010 4:36 AM, Jeremy Kister wrote:> When a caller connects, asterisk switches to the fax context and hangs > up the call.I was wrong, asterisk does not even switch to the fax extension- i added a noop, and it's not making it: exten => fax,1,NoOp( in fax extension ) exten => fax,n,Goto(fax,rx,1) the call ends before the noop. -- Jeremy Kister http://jeremy.kister.net./
This does sound like something that should stay on Asterisk-users. On Sat, Nov 13, 2010 at 3:36 AM, Jeremy Kister <asterisk-01 at jeremykister.com> wrote:> I upgraded from a perfectly working 1.6.2 asterisk installation > (including fax via app_fax_digium) to 1.8.0 this evening. >So you made sure to remove the res_fax.so module that was there from 1.6.2? Tried cleaning out the modules directory then installing just the 1.8 modules to be safe?> All my custom modules (including swift <thanks darren!>) are working > fine except for fax. > > When a caller connects, asterisk switches to the fax context and hangs > up the call. > > i've captured with: > core set verbose 10 > core set debug 10 > fax set debug on > sip set debug peer vgw1 > > (vgw1 is my cisco 1760 ata) > > http://jeremy.kister.net/tmp/fax/console.txt > http://jeremy.kister.net/tmp/fax/messages.txt > http://jeremy.kister.net/tmp/fax/sip.txt > > > I've tried using the packaged app_fax_spandsp and also Digium's > app_fax_digum for 1.8.0-rc1 -- no difference in behavior. > > Anyone have any ideas how I can get this fixed? >Have you tried doing tests where you send all calls straight into ReceiveFax and disable faxdetect? That may help track down where the problem is at least. You can put a noop before the call to receivefax if you'd like, but keep it simple and don't do anything else for this part of the test. If you've got a paid for Fax license (as opposed to Free Fax) then you can also contact Digium Support. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101113/cc092d54/attachment.htm