similar to: Zigor Ebro 650 compatibility

On 10/08/2012 21:58, nut-upsuser-request at lists.alioth.debian.org wrote: >>> Arnaud Quette<aquette.dev<at> gmail.com> writes: >>>> 2012/6/3 Chris Rees<crees<at> freebsd.org>: >>>>> Hi all, >>>> Hi Chris, >>>> >>>>> After some research I've found that this device should run with the

Hi Arnaud and NUT team You may recall some time ago, I and a few others posted questions about the above referenced (cheap and cheerful) USB-based UPS - specifically regarding FreeBSD USB support in NUT. The original posting was entitled "Zigor Ebro 650 compatibility". I've since tried the latest Windows port of NUT with my WinXP laptop connected to the Zigor Ebro and finally

2013/9/16 Martyn Hill <martyn.joseph.hill at gmail.com>: > Hi Arnaud and NUT team > > You may recall some time ago, I and a few others posted questions about the > above referenced (cheap and cheerful) USB-based UPS - specifically regarding > FreeBSD USB support in NUT. The original posting was entitled "Zigor Ebro > 650 compatibility". > > I've since

On Thu, Jun 26, 2014 at 10:20 PM, Steve Ballantyne <steve.ballantyne at gmail.com> wrote: >> However, we don't have all of the 09AE/0001 protocols decoded in the >> tripplite_usb driver. > > I can try to help out on this front? :-) Definitely. >> > 9.783126 Unknown input voltage range: 0x02 >> > 9.783308 Unknown number of switchable

Hello Charles, Thanks for the feedback. I will try to answer some of these questions: > 09AE/0001 is essentially a USB-to-serial converter, and is not > compatible with usbhid-ups. (Theoretically, we could have a companion > driver that talks the same protocols over a real RS-232 port, but the > hardware I used to develop the tripplite_usb driver only has a USB > port.) Ah, that

Thank you for the rapid response. I will try and investigate getting answers to some of your points but I'm a little new to Solaris so I'll need some time. Glancing at the configure output, it looks like it built against v0.1.7 of libusb (yes i think that is derived from the one you mention), checking for libusb version via pkg-config... 0.1.7 found checking for libusb cflags... checking

<facepalm ;)> the ellispis "something=..." were supposed to be replaced by your device ID numbers, etc. On Sat, Sep 23, 2023, 18:26 FatGear <fatgear1 at free.fr> wrote: > Hello There, > > I tried your advice and i don't think it works either, > > See the logs, > > " > > /tmp/nut# ./drivers/usbhid-ups -DDDDDD -d1 -s test -x port=auto -x

Hi, I'm using macports to install nut on a MAC OS X (10.7) I get the following error messages when I try running: sudo blazer_usb -a zigor -DDDDDDDDDD 0.944590 Checking device (0001/0000) (250/005) 2.785449 - VendorID: 0001 2.785465 - ProductID: 0000 2.785468 - Manufacturer: unknown 2.785472 - Product: STD UPS MON V1.0 2.785475 - Serial Number: unknown

Hello There, I tried your advice and i don't think it works either, See the logs, " /tmp/nut# ./drivers/usbhid-ups -DDDDDD -d1 -s test -x port=auto -x vendorid=... -x productid=... -x subdriver=... Network UPS Tools - Generic HID driver 0.52 (2.8.0-2557-g81fca30b2) USB communication driver (libusb 1.0) 0.46 ?? 0.000000??? [D3] main_arg: var='port' val='auto' ??

Hello all, been 5 years since I posted on this list, glad to be back :) I have a number of X-power Tigra 1kVA online UPS units. From some knowledgeable folks working for the local distributor, I learnt that from inside this looked like a Best 610 ups unit. Before, I had this UPS hooked via serial to my Windows 2003 server. For monitoring, some winpilot/upspilot software was also provided.

Well, now that the `subdriver` option got added to `usbhid-ups` too, you can at least try that (by building again the current master). See command-line help for the subdrivers it would currently recognize, and copy e.g. the first word as the matching option, e.g.: ./drivers/usbhid-ups -DDDDDD -d1 -s test -x port=auto -x vendorid=... -x productid=... -x subdriver=... and try to lockpick your

On Mar 5, 2015, at 2:34 AM, Jakub <jakub.scepka at gmail.com> wrote: > Come on, it started to be interesting! Do you have one of these UPSes? If so, here was Dan's email about a branch to test: > If you still can't get it to work with nutdrv_atcl_usb, another > approach could be worth considering. > > Since this UPS seems to be supported by UPSmart2000I, it could

Hello again! Sorry for not being able to test this before. Ulisses, please apply the patch to fix typo in my e-mail address. I've compiled it against nut-2.6.5 about 10 hours ago. It was everything fine until now. I'm seeing CHRG but the ups led wasn't blinking at all. Vendor software was strangely showing charging also. I am assuming this is expected behavior. I've set the

Use the name from ups.conf in front of "@localhost". ?The re?sult is quite different ;) root at artu:~# upsc Elit at artu Init SSL without certificate database Error: Driver not connected > What if you try nutdrv_qx without specifying megatec? (It should > autodetect.) > ?Here is the result: ? root at artu:~# upsdrvctl start Network UPS Tools - UPS driver controller

Merry Christmas to you all and best wishes! I ran into exactly the same problem as described. OS: FreeBSD 9.0-Rel UPS: Eaton E-Series NV 600H NUT: from Ports, nut-2.6.5_1 driver: blazer_usb I am sure the problem is not permission-related as it occurs even when the driver runs as root. My tested recipe for USB permissions is: 1. run usbconfig to find where the device is connected. In my case:

Hey all, I ended up picking up the module listed in Subject line. I switched over my config but apparently not all going smoothly. My config is: [office] driver = powerpanel port = /dev/ttyS0 desc = "Office UPS" When I test the driver running power-panel as a test, I get: > [root at cornelius init.d]# powerpanel -a office -D -D -D -D >

Hi, I know it's been a topic many times here, but I've searched the archives, googled for days, and I simply don't believe, that there is still no solution to this. I'm using a PowerCom BNT-600AP ups with usb port. I've downloaded the latest version from svn, compiled it, and tried to use it: * megatec(_usb) - no luck, it did not find the UPS (I?ve read in this list, that

[As posted as Ubuntu Question #184284 on Launchpad] Hi, I try to set up nut (2.4.3) on my Lucid (10.04.3 LTS) to make use of my old but very trusty UPS (Best Power Fortress 660 LI). Yes, this UPS is old (about 16 years), but with its third battery pack last week it is as good as new. It runs perfectly well with Windows XP, Vista and even Windows 7. But not so with Ubuntu and nut. After

Hi list, on my previous (lenny or squeeze) machine, I had it up and running, but that machine and configs are gone - and on my new jessie machine (see device and config details below) I cannot start the driver: # /lib/nut/bestups -DDDDD -a Patriot_Pro_II_750 0.000000 debug level is '5' 0.000806 send_to_all: SETINFO device.type "ups" 0.000842 send_to_all:

Hello! I'm trying to use nut with a Ippon Smart Winner 3000 UPS (http://shop.key.ru/photo/items/45535.jpg) which looks like a custom-labeled OEM model of the megatec branch. I tried both the megatec_usb and the blazer_usb drivers for it, with a obvious config section: [ippon] driver = blazer_usb port = auto vendorid = 06da productid = 0003 desc = "Ippon Smart Winner 3000" If I