similar to: Two servers with redundant supplies on two UPSs

Hello all, been 5 years since I posted on this list, glad to be back :) I have a number of X-power Tigra 1kVA online UPS units. From some knowledgeable folks working for the local distributor, I learnt that from inside this looked like a Best 610 ups unit. Before, I had this UPS hooked via serial to my Windows 2003 server. For monitoring, some winpilot/upspilot software was also provided.

Hello all, I've got an MGE Pulsar Ellipse Premium 800 powering a couple of FreeBSD systems. Driver used is mge-shut, I don't know what the new mge-shut driver offers, but I follow the "if it works, don't fix it" dogma here. :) I also had a nut server installed on the master, with the /usr/local/etc/rc.d/nut script slightly modified to include a couple of upsrw commands

Hi Guys, I'd like to submit a patch to enable NUT to communicate with APC 5G UPSs. The current usbhid-ups driver recognises APC UPSs by the Vendor ID and Product ID of 0x051D and 0x0002. This needs to be amended with the new Product ID of 0x0003. (See attached file: apc-hid.patch) Secondly, when Nut polls the UPS via the interrupt channel, these will time out, resulting in frequent lost

I have been happily using NUT to monitor a couple of Eaton UPS. These are independent UPSs, each driving one "leg" of the power in our data center. In this scenario, I've told my clients they need to have one UPS working and to shutdown when the last UPS reaches critical battery. I have recently learned that our power arrangement will be changing to a parallel-fed/redundant

On October 31, 2017 4:09:46 PM GMT+01:00, Garrett Michael Hayes <Garrett at VerbalImaging.com> wrote: >Greetings Gentlebeings, > >I have started deploying a number of NUT instances on Raspberry Pi >machines (Raspbian Jessie) across my network. The purpose of these >"nutcases" as we refer to them is to monitor the status of the UPSs >supporting our network

I have three APC SmartUPS 5000s. Two of them are AP9617 and one is AP9619. I have a RS-232 connections from my monitor host to all three. All three report status and give information. One of the two AP9617 - ups3-1 - does not shut down when FSD is sent. It did when I first set this system up a year or two ago but it's stopped doing so since then. Resetting the management interface does not

tags 441342 upstream thanks Hi Robert, thanks for your report and investigation. We will check to fix this and give you news back. 2007/9/9, Robert Woodcock <rcw at debian.org>: > Package: nut > Version: 2.2.0-2 > Severity: important > > I recently set up nut at work to monitor the 15 APC Smart-UPS 1500s we have > in our server room. Since we currently only have one

I'm obviously biased but I like Tripp Lite stuff. I try to pitch in and help with Network UPS Tools issues related to Tripp Lite when I can too (albeit the developers and users on this list are usually more helpful than me). Just to confirm, it sounds like you are looking at the SU5000RT4UHV, correct?

This was the secret sauce! I first modified my BASH script to stuff the output of the 'set' command into a variable, then passed that variable in to my email command. Then I triggered an event and saw what variables were there in the body of the message. Voila! $UPSNAME and $NOTIFYTYPE were there and available. I modified the script to pump THOSE into the mail command, and the problem

Can anyone tell me whether 4 has better native support for UPSs with a USB monitoring interface? Thanks Nigel

Don't choose mini-box OpenUPS. No instant commands. No reporting of power fail. No replies to emails to support. Otherwise perfect! I have mine working with support from Charles but not ideal. Regards, Philip. Sent from my iPhone > On 9 Apr 2015, at 05:16, Ben Kamen <bkamen at benjammin.net> wrote: > > I'm looking to buy some new UPSs and am thinking of parting ways

On 06/25/2017 05:52 PM, Philip Rhoades wrote: > Larry, > > > On 2017-06-25 23:26, Larry Fahnoe wrote: >> Hi Phil, >> >> I don't have an answer to your question about the lack of LAN ports, > > > I think it is weird - with everything else being connected to LANs > like fridges etc . . why not UPSs? because probably an UPS port ( or even RS232-to-USB

On Mar 25, 2020, at 6:09 PM, Lee Damon <nomad at ee.washington.edu> wrote: > > I have no experience with Tripp Lite UPSs and the reviews I've found online are scant and fairly mixed so I thought I'd ask here... It's always hard to get a good read on whether a particular UPS brand is problematic, or if there is more noise on the lists because people are trying to make

I'm running a single "nut-server" that monitors seven ups units. In upsmon.conf: MONITOR ups-1 0 <User> <Pw> master MONITOR ups-2 0 <User> <Pw> master MONITOR ups-3 0 <User> <Pw> master MONITOR ups-4 0 <User> <Pw> master MONITOR ups-5 1 <User> <Pw> master MONITOR ups-6 1 <User> <Pw> master MONITOR

Hi Phil, I don't have an answer to your question about the lack of LAN ports, but can offer my experience with NUT for a home server environment. I've tended to prefer the Tripp-Lite UPS systems, mainly because I originally felt they did a good job of power filtering. I use a NUT master running on a Raspberry Pi 3 which is easy to maintain and gets current updates via its Debian roots.

Hey all, I recently got an RMCARD205 for my Cyber UPS.... if I use no MIBS line in the config file, I get this: > Network UPS Tools - UPS driver controller 2.6.5 > Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) > No matching MIB found for sysOID '.1.3.6.1.4.1.3808.1.1.1'! > Please report it to NUT developers, with an 'upsc' output for your device. >

[please CC the list] On Apr 10, 2015, at 7:55 AM, Ben Kamen <bkamen at benjammin.net> wrote: > On 2015-04-09 9:48 PM, Charles Lepple wrote: >> On Apr 8, 2015, at 11:16 PM, Ben Kamen <bkamen at benjammin.net> wrote: >> >> As a starting point, you might want to search the NUT Device Dump Library (DDL) for 'test.battery' and 'test.interval':

On 3/25/20 3:31 PM, David Zomaya wrote: > Just to confirm, it sounds like you are looking at the SU5000RT4UHV, > correct? > > https://www.tripplite.com/smartonline-208-240v-5kva-4.5kw-double-conversion-ups-4u-rack-tower-extended-run-snmpwebcard-option-usb-db9-serial~SU5000RT4UHV > That does seem to be the one they are quoting, yes. thanks, nomad

On 3/25/20 3:50 PM, David Zomaya wrote: > Thanks. I haven't used that unit specifically with Network UPS Tools, > but have used similar (from a protocol perspective) units. > > I'm working remotely for a while, but on the off chance I get into the > position to connect a unit via USB, what Operating System are you using? > > If the opportunity arises, I can try to

Hi decided to bit the bullet and give icecast2 a try on a box that has ensim on ( I am no expert but I try. I unpacked the tar OK and ran ./configure and get the following error could someone help me please as I cannot install without fixong this I am sure. checking for xslt-config... no configure: error: xslt-config could not be found AJB --- >8 ---- List archives: