similar to: gettext failing in FreeBSD 6 RELEASE

Hi everyone, I just finished installing FreeBSD 6 RELEASE on my Toshiba Tecra A4 laptop and the installation was fine, however, when I rebooted the machine, I don't get the boot loader screen as if the machine can not see my drive! I tried the reinstalling and ensured that I set the slice to be bootable but that didn't change anything. Not sure if this is a common issue with FreeBSD 6 on

The AMDIL Target needs new dwarf tokens for dwarf debug support, I'd we should handle this best? (which numbers to use for the new tokens): Two new tokens will be added: DW_AT_AMDIL_address_space (currently 0x3ff1) : needed in order to know which address space to read data from DW_AT_AMDIL_resource (currently 0x3ff2) : the resource ID information for when we read memory from UAV ---Yousef

Shajrawi, Yousef wrote: > > > The AMDIL Target needs new dwarf tokens for dwarf debug support, I’d we > should handle this best? (which numbers to use for the new tokens): > > Two new tokens will be added: > > DW_AT_AMDIL_address_space (currently 0x3ff1) : needed in order to know > which address space to read data from > > DW_AT_AMDIL_resource (currently 0x3ff2) :

Dear All, Please help on the following little creatures: 1. When I reboot, the system stays on 'send mail' for a long time. Was not like that before. Why? 2. I have a Conexant modem card (internal) which works well with my other boot on same machine (XP). The modem is on com 3. However, the linux shows me, 'sorry modem is busy' when I try to dial (I configured using KDE). Query

Skipped content of type multipart/alternative-------------- next part -------------- # #======================= Global Settings ===================================== [global] # workgroup = NT-Domain-Name or Workgroup-Name workgroup = WXPGRP # server string is the equivalent of the NT Description field server string = Samba Server printcap name = /etc/printcap load printers = yes

Hello! I set debug level 10 to samba 2.2.0 and now see in log: [2001/05/10 08:31:48, 10] smbd/uid.c:gid_to_sid(409) gid_to_sid: winbind lookup for gid 5284 failed - trying local. How can I say to samba to not try use winbind? -- Wire connection and Windows reinstallation senior engineer Dmitry Melekhov http://www.belkam.com/~dm 2:5050/11.23@fidonet

Hi, I have this error, I have a digium card TE110P Tiger3xx When I'm load the dirvers by this command modprobe wcte11xp I got this error "Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected FATAL: Error running install command for wct1xxp " when I'm Lunch the command ztcfg -vv I got this error.

I got the same problem yesterday and i just ch'ange the kernel from 2.6.12-1.1372_FC3 to 2.6.9 kernel of fedora core 3, and now it work perfectly. I think there is some problems with the new kernel of fedora. -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Altus Snyman Inviato: mercoled? 27 luglio 2005

Hi everybody, I have a Asterisk installation working with a Digi card (HFC-S PCI A ISDN card) and another Asterisk installation with a Digium (Digium Wildcard TE110P T1/E1 Card). For Digium I used zaptel drivers but Digi works with bristuff drivers. Both installations work fine and are connected to two different phone lines. What I want to do is let calls incoming on the Digi installation be

I had a problem with this card and 2.6.11 kernel. I am using FC3 but sticking with the 2.6.9 kernel. I had a lot of make warnings on the zaptel build and the card played up. It also wouldn't do a modprobe -r without crashing the system. With 2.6.9 zaptel compiles fine and I can unload the mod as and when. Also stay well away from the 2.6.12 FC3 kernel as it didn't work at all and

Hi, I a new user of asterisk, I'm trying to in install zaptel drivers on my ISDN card Digium Tiger 3xx TE110P. And my configuration is # # Zaptel Configuration File # span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone = it ; ; ; Zapata Configuration file ; [channels] immediate=no switchtype=EuroISDN signalling=pri_cpe pridialplan=unknown context=incoming usecallerid=yes group=1 channel

Hi, This error I got it just when I gonfigure zaptel support isdneuro 31 channels. But if I configure zaptel to support T1 and just 24 channels I have no problem. ######################################################################## #### # # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # loadzone = it span=1,1,0,ccs,hdb3,crc4 bchan=1-23 dchan=16

Hi I'm trying to get Dovecot to use Drupal users password for authenticating IMAP users. But I just cant figure out how to make Dovecot understand the password hash type that Drupal 7 is using. My example user with password Teacher1 looks like this in Drupal database: $S$DZwJa.U8HXT2PvTmwCK13rGEYEvnx5DB6/hlqnfCBum4s4U7MVWU Dovecot retrieves this hash but complains that its not a recognized

*//* *//* */Cloud Futures: Hot Topics in Research and Education/* Berkeley, CA | May 7-8, 2012 http://research.microsoft.com/cloudfutures2012/ The Cloud Futures Workshop series brings together thought leaders from academia, industry, and government to discuss the role of cloud computing across a variety of research and educational areas---including computer science, engineering, Earth

*//* *//* */Cloud Futures: Hot Topics in Research and Education/* Berkeley, CA | May 7-8, 2012 http://research.microsoft.com/cloudfutures2012/ The Cloud Futures Workshop series brings together thought leaders from academia, industry, and government to discuss the role of cloud computing across a variety of research and educational areas---including computer science, engineering, Earth

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

Hello Community, is it possible to include perl scripts into a ruby view (.rhtml)? If yes, the structure has to be /public --> /cgi-bin like in a web application with cgi scripts? Best regards, Mathias -- Posted via http://www.ruby-forum.com/.

Hello,   Are there general guidelines around on how to configure Shorewall for use with SIP phones ?  Especially regarding (some?) Cisco SIP phones which are expecting a reply at port 5060 while sending from an arbitrary high port. Thanks ! ------------------------------------------------------------------------------ Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS, MVC,

I have the same problem in a box with 2 HFC-PCI, but i already remove the row in modprobe.conf and load the module manually. Both cards works fine Any idea ? Giordano -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Julian J. M. Inviato: luned? 27 giugno 2005 12.04 A:

Hi, on my page I start an ajax-request which returns rhtml-code (I use Rails) looping over some objects. When I place the following code within the loop my browser (FF) crashs: <script> var set_std_objekt = function (id) { new Ajax.Updater(''divname'', ''/dosomestuff'', { asynchronous:true, evalScripts:true }) } </script> <a