Yousef Herzallah
2005-Jul-27 06:01 UTC
R: [Asterisk-Users] Zaptel error: Unable to create channel op type'Zap'
I got the same problem yesterday and i just ch'ange the kernel from 2.6.12-1.1372_FC3 to 2.6.9 kernel of fedora core 3, and now it work perfectly. I think there is some problems with the new kernel of fedora. -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Altus Snyman Inviato: mercoled? 27 luglio 2005 13.45 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: Re: [Asterisk-Users] Zaptel error: Unable to create channel op type'Zap' I just did the modprobe 2 times and it worked but that was on the 2.6.9 kernel Something about core 3 taking its time to create the device modprobe zaptel sleep 3 modprobe zaptel :-) Peter Raaijmakers wrote:> Hi, > > In struggeling with this problem for a two weeks now. > I have a X100P clone card in my * box but I'm not able to get it to run. > I'm running fedora core 3 with kernel 2.6.12-1.1372_FC3 on a VIA > EPIAML500EA > > The compiling of both zaptel and asterisk went without any errors. > I can run zaptel and asterisk without any errors. > When I run ztcfg I don't get any errors too. > > But when I try to place a call trough my x100p I get this error > message in asterisk: > NOTICE app_dial.c:1091 dial_exec_full: Unable to create channel op > type 'Zap' > > Outside calls are not comming in either. > > Here are my zapata.conf and zaptel.conf: > > ------------ > -zapata.conf- > [channels] > signalling=fxs_ks > context=incoming > channel=>1 > > -zaptel.conf- > loadzone = nl > defaultzone=nl > > fxsks=1 > > ----------- > > The funny part comes here: > I'm installing a *box for a friend with a ISDN card and the same > problem occures. > So I probarbly doing something wrong in fedora... > > Any ideas??? > > Thanks, > Peter > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Damon Brown
2005-Jul-27 07:08 UTC
R: [Asterisk-Users] Zaptel error: Unable to create channel op type'Zap'
I worked over two days setting up a card on fc 3, I had 2.6.9 installed. No action on the TE110P at all. I downloaded the stable zaptel/asterisk CVS and found an uncompiled wx110xp driver and recompiled. It starts up great now. There are some issues with fc3 FC3 has some issues with loading On Wed, 2005-07-27 at 15:01 +0200, Yousef Herzallah wrote:> I got the same problem yesterday and i just ch'ange the kernel from 2.6.12-1.1372_FC3 to 2.6.9 kernel of fedora core 3, and now it work perfectly. > I think there is some problems with the new kernel of fedora. > > > -----Messaggio originale----- > Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Altus Snyman > Inviato: mercoled? 27 luglio 2005 13.45 > A: Asterisk Users Mailing List - Non-Commercial Discussion > Oggetto: Re: [Asterisk-Users] Zaptel error: Unable to create channel op type'Zap' > > I just did the modprobe 2 times and it worked but that was on the 2.6.9 > kernel > Something about core 3 taking its time to create the device > modprobe zaptel > sleep 3 > modprobe zaptel > :-) > > Peter Raaijmakers wrote: > > > Hi, > > > > In struggeling with this problem for a two weeks now. > > I have a X100P clone card in my * box but I'm not able to get it to run. > > I'm running fedora core 3 with kernel 2.6.12-1.1372_FC3 on a VIA > > EPIAML500EA > > > > The compiling of both zaptel and asterisk went without any errors. > > I can run zaptel and asterisk without any errors. > > When I run ztcfg I don't get any errors too. > > > > But when I try to place a call trough my x100p I get this error > > message in asterisk: > > NOTICE app_dial.c:1091 dial_exec_full: Unable to create channel op > > type 'Zap' > > > > Outside calls are not comming in either. > > > > Here are my zapata.conf and zaptel.conf: > > > > ------------ > > -zapata.conf- > > [channels] > > signalling=fxs_ks > > context=incoming > > channel=>1 > > > > -zaptel.conf- > > loadzone = nl > > defaultzone=nl > > > > fxsks=1 > > > > ----------- > > > > The funny part comes here: > > I'm installing a *box for a friend with a ISDN card and the same > > problem occures. > > So I probarbly doing something wrong in fedora... > > > > Any ideas??? > > > > Thanks, > > Peter > > > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Derek Whitten
2005-Jul-27 09:08 UTC
R: [Asterisk-Users] Zaptel error: Unable to create channel op type'Zap'
why not just compile the kernel from source?? compiling the 2.6.x kernels are easy well.. of course FC is based on deadrat too... maybe switch to slackware... On Wed, 2005-07-27 at 06:01, Yousef Herzallah wrote:> I got the same problem yesterday and i just ch'ange the kernel from 2.6.12-1.1372_FC3 to 2.6.9 kernel of fedora core 3, and now it work perfectly. > I think there is some problems with the new kernel of fedora. > > > -----Messaggio originale----- > Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Altus Snyman > Inviato: mercoled? 27 luglio 2005 13.45 > A: Asterisk Users Mailing List - Non-Commercial Discussion > Oggetto: Re: [Asterisk-Users] Zaptel error: Unable to create channel op type'Zap' > > I just did the modprobe 2 times and it worked but that was on the 2.6.9 > kernel > Something about core 3 taking its time to create the device > modprobe zaptel > sleep 3 > modprobe zaptel > :-) > > Peter Raaijmakers wrote: > > > Hi, > > > > In struggeling with this problem for a two weeks now. > > I have a X100P clone card in my * box but I'm not able to get it to run. > > I'm running fedora core 3 with kernel 2.6.12-1.1372_FC3 on a VIA > > EPIAML500EA > > > > The compiling of both zaptel and asterisk went without any errors. > > I can run zaptel and asterisk without any errors. > > When I run ztcfg I don't get any errors too. > > > > But when I try to place a call trough my x100p I get this error > > message in asterisk: > > NOTICE app_dial.c:1091 dial_exec_full: Unable to create channel op > > type 'Zap' > > > > Outside calls are not comming in either. > > > > Here are my zapata.conf and zaptel.conf: > > > > ------------ > > -zapata.conf- > > [channels] > > signalling=fxs_ks > > context=incoming > > channel=>1 > > > > -zaptel.conf- > > loadzone = nl > > defaultzone=nl > > > > fxsks=1 > > > > ----------- > > > > The funny part comes here: > > I'm installing a *box for a friend with a ISDN card and the same > > problem occures. > > So I probarbly doing something wrong in fedora... > > > > Any ideas??? > > > > Thanks, > > Peter > > > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-- -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS/GIT> d-@ s+:+ a? C+++ BLHIS$ U+++ P+> L+++ !E W+++$ N++ o+ K w-- PS+++ PE@ Y+ PGP++ t 5? X !R tv+ b- DI-- D G e+> h---- r+++ y++++ ------END GEEK CODE BLOCK------ -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050727/5c61df74/attachment.pgp