asterisk users - Jul 2005 - R: Zaptel error: Unable to create channel op type'Zap'

I got the same problem yesterday and i just ch'ange the kernel from
2.6.12-1.1372_FC3 to 2.6.9 kernel of fedora core 3, and now it work perfectly.
I think there is some problems with the new kernel of fedora.


-----Messaggio originale-----
Da: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] Per conto di Altus Snyman
Inviato: mercoled? 27 luglio 2005 13.45
A: Asterisk Users Mailing List - Non-Commercial Discussion
Oggetto: Re: [Asterisk-Users] Zaptel error: Unable to create channel op
type'Zap'

I just did the modprobe 2 times and it worked but that was on the 2.6.9 
kernel
Something about core 3 taking its time to create the device
modprobe zaptel
sleep 3
modprobe zaptel
:-)

Peter Raaijmakers wrote:
> Hi,
>
> In struggeling with this problem for a two weeks now.
> I have a X100P clone card in my * box but I'm not able to get it to
run.
> I'm running fedora core 3 with kernel 2.6.12-1.1372_FC3 on a VIA 
> EPIAML500EA
>
> The compiling of both zaptel and asterisk went without any errors.
> I can run zaptel and asterisk without any errors.
> When I run ztcfg I don't get any errors too.
>
> But when I try to place a call trough my x100p I get this error 
> message in asterisk:
>  NOTICE app_dial.c:1091 dial_exec_full: Unable to create channel op 
> type 'Zap'
>
> Outside calls are not comming in either.
>
> Here are my zapata.conf and zaptel.conf:
>
> ------------
> -zapata.conf-
> [channels]
> signalling=fxs_ks
> context=incoming
> channel=>1
>
> -zaptel.conf-
> loadzone = nl
> defaultzone=nl
>
> fxsks=1
>
> -----------
>
> The funny part comes here:
> I'm installing a *box for a friend with a ISDN card and the same 
> problem occures.
> So I probarbly doing something wrong in fedora...
>
> Any ideas???
>
> Thanks,
> Peter
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

I worked over two days setting up a card on fc 3, I had 2.6.9 installed.
No action on the TE110P at all.  I downloaded the stable zaptel/asterisk
CVS and found an uncompiled wx110xp driver and recompiled.  It starts up
great now.

There are some issues with fc3   

FC3 has some issues with loading 
On Wed, 2005-07-27 at 15:01 +0200, Yousef Herzallah
wrote:
> I got the same problem yesterday and i just ch'ange the kernel from
2.6.12-1.1372_FC3 to 2.6.9 kernel of fedora core 3, and now it work perfectly.
> I think there is some problems with the new kernel of fedora.
> 
> 
> -----Messaggio originale-----
> Da: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] Per conto di Altus Snyman
> Inviato: mercoled? 27 luglio 2005 13.45
> A: Asterisk Users Mailing List - Non-Commercial Discussion
> Oggetto: Re: [Asterisk-Users] Zaptel error: Unable to create channel op
type'Zap'
> 
> I just did the modprobe 2 times and it worked but that was on the 2.6.9 
> kernel
> Something about core 3 taking its time to create the device
> modprobe zaptel
> sleep 3
> modprobe zaptel
> :-)
> 
> Peter Raaijmakers wrote:
> 
> > Hi,
> >
> > In struggeling with this problem for a two weeks now.
> > I have a X100P clone card in my * box but I'm not able to get it
to run.
> > I'm running fedora core 3 with kernel 2.6.12-1.1372_FC3 on a VIA 
> > EPIAML500EA
> >
> > The compiling of both zaptel and asterisk went without any errors.
> > I can run zaptel and asterisk without any errors.
> > When I run ztcfg I don't get any errors too.
> >
> > But when I try to place a call trough my x100p I get this error 
> > message in asterisk:
> >  NOTICE app_dial.c:1091 dial_exec_full: Unable to create channel op 
> > type 'Zap'
> >
> > Outside calls are not comming in either.
> >
> > Here are my zapata.conf and zaptel.conf:
> >
> > ------------
> > -zapata.conf-
> > [channels]
> > signalling=fxs_ks
> > context=incoming
> > channel=>1
> >
> > -zaptel.conf-
> > loadzone = nl
> > defaultzone=nl
> >
> > fxsks=1
> >
> > -----------
> >
> > The funny part comes here:
> > I'm installing a *box for a friend with a ISDN card and the same 
> > problem occures.
> > So I probarbly doing something wrong in fedora...
> >
> > Any ideas???
> >
> > Thanks,
> > Peter
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

why not just compile the kernel from source??

compiling the 2.6.x kernels are easy

well.. of course FC is based on deadrat too...

maybe switch to slackware... 



On Wed, 2005-07-27 at 06:01, Yousef Herzallah wrote:
> I got the same problem yesterday and i just ch'ange the kernel from
2.6.12-1.1372_FC3 to 2.6.9 kernel of fedora core 3, and now it work perfectly.
> I think there is some problems with the new kernel of fedora.
> 
> 
> -----Messaggio originale-----
> Da: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] Per conto di Altus Snyman
> Inviato: mercoled? 27 luglio 2005 13.45
> A: Asterisk Users Mailing List - Non-Commercial Discussion
> Oggetto: Re: [Asterisk-Users] Zaptel error: Unable to create channel op
type'Zap'
> 
> I just did the modprobe 2 times and it worked but that was on the 2.6.9 
> kernel
> Something about core 3 taking its time to create the device
> modprobe zaptel
> sleep 3
> modprobe zaptel
> :-)
> 
> Peter Raaijmakers wrote:
> 
> > Hi,
> >
> > In struggeling with this problem for a two weeks now.
> > I have a X100P clone card in my * box but I'm not able to get it
to run.
> > I'm running fedora core 3 with kernel 2.6.12-1.1372_FC3 on a VIA 
> > EPIAML500EA
> >
> > The compiling of both zaptel and asterisk went without any errors.
> > I can run zaptel and asterisk without any errors.
> > When I run ztcfg I don't get any errors too.
> >
> > But when I try to place a call trough my x100p I get this error 
> > message in asterisk:
> >  NOTICE app_dial.c:1091 dial_exec_full: Unable to create channel op 
> > type 'Zap'
> >
> > Outside calls are not comming in either.
> >
> > Here are my zapata.conf and zaptel.conf:
> >
> > ------------
> > -zapata.conf-
> > [channels]
> > signalling=fxs_ks
> > context=incoming
> > channel=>1
> >
> > -zaptel.conf-
> > loadzone = nl
> > defaultzone=nl
> >
> > fxsks=1
> >
> > -----------
> >
> > The funny part comes here:
> > I'm installing a *box for a friend with a ISDN card and the same 
> > problem occures.
> > So I probarbly doing something wrong in fedora...
> >
> > Any ideas???
> >
> > Thanks,
> > Peter
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GCS/GIT> d-@ s+:+ a? C+++ BLHIS$ U+++ P+> L+++ !E W+++$ N++ o+ K w--
PS+++ PE@ Y+ PGP++ t 5? X !R tv+ b- DI-- D G e+> h---- r+++ y++++ 
 ------END GEEK CODE BLOCK------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20050727/5c61df74/attachment.pgp