similar to: gnokii on FreeBSD 6.0 and Dell PE 2850

Hi all, sorry for the OOT. I've been trying to setup a sms gateway for a couple of sleepless nights now. I use Itegno 3000 USB gsm modem, gnokii sms manager, and playsms a web interface for sms http://freshmeat.net/projects/playsms/ on FC4. Here's what happen: 1. Using minicom, I can send sms 2. Using xgnokii (x interface of gnokii), I can send sms 3. Using playsms, I CANNOT send sms, it

Hi, Has anyone tried to use gnokii to send/receive SMS messages via serial or USB with AT commands while running Asterisk? Some of my calls have a "scratchy sound" once in a while. It doesn't seem to be due to packet loss but some kind of interference (CPU is ok, etc.). I've noticed some coincidence in time between this scratchy sound and the gnokii process. I have a bash

Hi, I'm trying to package gnokii (using FC6 SRPM as base). I can build it without problems, my problem is that I want to upgrade it from CVS version. I download the cvs version (from cvs, because "current" tar.gz appears to be broken) but ... ?How can I convert this CVS version to a "peseudo release" to make a diff from 0.6.14 and add the patch into the SOURCES? Thanks

Hi I want to setup a SMS system for Nagios on a 5.9 box. I read in a blog that the two modems Huawei [ E160G | E176 ] work with 6.3. Anybody any experience with those modems and do they work with 5.9? Are there any other devices that are better/recommended? Thanks Jobst -- 186,262 miles/second : Not just a good idea, it's the LAW. | |0| | Jobst Schmalenbach, jobst at

Hi Y'All, Yum update on CentOS 5 has for the last week or so started giving me the following errors root at neodymium 16:03:46 ~ # nice yum upgrade Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * addons: mirror.sov.uk.goscomb.net * base: mirror.sov.uk.goscomb.net * epel: mirror01.th.ifl.net * extras: mirror.sov.uk.goscomb.net * rpmfusion-free-updates:

Hello, I recently had a failure with my old MGE ESV8 ups, it just died on me so I had to get a new one. I found a MGE ESV8+ cheap and everything seems to work fine with it except the communication with the computer. The old ESV8 (non +) worked fine with NUT after applying some patches I got from the mailing list, but I think they are in the source tree now. I'm using the same cable that

Hello list- Anyone with Tripplite SMX1500XLRT2U (http://www.tripplite.com/EN/products/model.cfm?txtModelID=2687) successfully integrated with NUT through serial port? I'm trying to connect to SMX1500XLRT2U using serial cable shipped with UPS under FreeBSD 6.3-STABLE and NUT 2.2.2 installed from ports. Unfortunately, it looks like it couldn't be recognized. %dmesg | grep sio sio0:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have been trying to access my Nokia 6230 using a DKU-2 data cable from CentOS, with some weird results. Interesting thing is that I have VMWare installed on this machine and, if I install the Nokia Suite inside it, it can access the phone without problems. So all hardware related parts are working. Anyway, kernel load the cdc_acm module, and gives

Hello all, Some time ago, you all were very helpful in getting nut running on an OpenBSD system, using--for what it's worth--a CyberPower 1500AVR. So I finally got my FreeBSD system's UPS, also a CyberPower 1500AVR, within reach of its serial cable and I'm trying to get nut running here. I'm going nuts. Basically, I copied the OpenBSD configuration over to the FreeBSD system

Anyone know what is the problem for this? thanks Andrew freebsd 540$ /usr/local/etc/rc.d/nut restart nut not running? (check /var/db/nut/upsd.pid). Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools - Generic UPS driver 1.32 (2.0.4) UPS type: APC Back-UPS (940-0023A cable) Unable to open /dev/cuad0: Device busy Current user id: uucp (66) Serial port owner: uucp (66) Serial

Hi, I'm working on my dial plan and I'd like to parse all dialed numbers to convert them to the format I want. For example if someone dials 0112345678 or 0033112345678 I would like to convert it to +33112345678 and then match the number to my exten => +33XXXXXXXX statements. Is this possible with asterisk? I tried different ways (using _., s, ...) but I can't seem to get that

Hi Stefanos, you should mail to the NUT list, and try the megatec driver, which is only available from subversion for the moment (but should be included in the next stable release). Carlos might give you some help with this driver. Arnaud Quette -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Have anybody expirience with Ippon Smart Winner 750/1000/1500/2000/3000 with serial interface ? I have tryed megatec and blazer_ser drivers with no success: [IPPON] driver = megatec port = /dev/ttyd0 desc = "IPPON smart winner 1500VA" model = "Smart Winner 750/1000/1500/2000/3000" # ./megatec -a IPPON -DDD Network UPS Tools - Megatec

Hello, We are using the equipment "MUSTEK PowerMust 3000 NetGuard RM". That is using Megatec protocol. But unfortunately not all the data can be viewed correctly when dumping from utility "upsc". For example: upsbox# upsc mustek at localhost battery.voltage: 108.00 battery.voltage.nominal: 96.0 driver.name: megatec driver.parameter.pollinterval: 2 driver.parameter.port:

Hi Mark Did you or anyone else ever find a satisfactory solution to this? Are there any phones which provide voice through the serial connection? What about the nokia card phone - does it have open source drivers? Cheers Rob On Sat, Jul 13, 2002 at 10:31:53AM -0500, Mark Spencer wrote: > Does anyone (maybe in Europe) know how I could build a GSM compatible > channel for Asterisk, so

I'm looking for people that are using the 'cyberpower' driver that has been available for some years now. It seems the overhauled 'powerpanel' driver could support your UPS too. The commands and status bytes used are identical, the only difference being the way the values read for battery charge, temperature and frequency are interpreted. If we can find a way to detect when to

I'm looking for people that are using the 'cyberpower' driver that has been available for some years now. It seems the overhauled 'powerpanel' driver could support your UPS too. The commands and status bytes used are identical, the only difference being the way the values read for battery charge, temperature and frequency are interpreted. If we can find a way to detect when to

Hi Has anyone got a Compaq(/HP) T700 UPS to work with the BCMXCP driver? I've built yesterday's CVS of NUT 2.1 on one of my FreeBSD systems but chown root:wheel /dev/cuaa0 /usr/local/libexec/upsdrvctl -u root start gives: -- Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) Communications with UPS lost: Error executing command

I am forklifting a Merridian option 51c with 112 Nortel Digital Handsets and 400 analog units. For the analog units I have quotes for 9 ADIT 600 48 port fxs units and 17 Rhino 24 port FXS channel banks. I have used neither. Which is the best choice? The price difference is not that great. I am looking at Citelinks 24 port Handset Gateway for the Nortel Digital units. (Any other suggestions

Okay, I experimented with both KDE and Gnome, and decided I'd rather use Gnome. After making this decision, I wanted to remove KDE, because I like to keep my hard drive as lean as possible. I accomplished this, or so I thought, by running: # yum groupremove "KDE (K Desktop Environment)". It seemed to work. Removed a whole bunch 'o stuff. Okay, but then I wanted to install k3B,