similar to: APC 750VA UPS not recognized by NUT?

[Andrew: please subscribe to the nut-upsuser list: http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser Also, please gzip any attached logs.] > Hello, > > I downloaded NUT ver 2.6.2 and tried it on my Linux development > board. when I configure and it notified me that "USB drivers > requested, but libusb not found." > Then I download libusb

I have an APC SMX3000RMLV2UNC UPS, with installed network card model AP9631. http://www.apc.com/resource/include/techspec_index.cfm?base_sku=SMX3000RMLV2UNC http://www.apc.com/resource/include/techspec_index.cfm?base_sku=AP9631 I planned to use network connectivity with this unit and apcupsd, but have not this far. The UPS is shared by multiple servers, so a USB or Serial connection via the

Dear NUT users/developers, I'm having trouble while trying to configure the UPS APC BZ2200BI-BR[1] in NUT, which despite having a USB cable it apparently communicates using the serial protocol. The relevant output of 'lsusb' is: Bus 002 Device 004: ID 051d:c812 American Power Conversion The device is registered as /dev/ttyACM0 and uses the kernel module 'cdc_acm' (USB

Hi gang, I have the APC BR1500LCD [1] and would like to know if NUT can handle it. The compatibility list [2] does not show it but I thought that perhaps it would fit in as some other unit. Does anyone else have this unit? [1] http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BR1500LCD [2] http://www.networkupstools.org/compat/stable.html -- /jm

Hi, Has anyone managed to get a Plexus UPS talking to their NAS. I've followed the excellent instructions here http://forum.qnap.com/viewtopic.php?f=182 <http://forum.qnap.com/viewtopic.php?f=182&t=35970&start=0> &t=35970&start=0 but I'm not there yet. When I manually start upsdrvctl without the UPS plugged in I get [~] # /usr/bin/upsdrvctl start Network UPS

Hi Paul, > I have another NUT client for your client-projects[1] page: MonAMI[2]. > > MonAMI aims to be a "universal sensor framework". The data gathered from > MonAMI's NUT plugin can be sent to any of the output plugins. Currently, > these include Ganglia, Nagios, KSysguard and a file-logger (amongst others). interesting though I've not had time to

Hi Chad, Thanks for your report. Everything seems fine, apart from the battery.date (2052/00/36), which vaguely recall me something... I've added this info to the Testing and trunk driver.list Arnaud -- Please note my new email address: arnaudquette at eaton.com -- Linux / Unix Expert R&D - MGE Office Protection Systems - http://www.mgeops.com Network UPS Tools (NUT) Project Leader -

Hi, I have been asked to install NUT on a Solaris 9 system. The UPS is an APC Back UPS RS 1500 (link below) with an USB connection. From reading the FAQ, it looks like the proper driver would be newhidups, but there is some development work required to map between the Solaris USB hid and the newhidups. Is that correct, or am I overlooking something simpler?

Hi, all! Actually I have two questions for a same reason: I want to share my NUT to my LAN, or read UPS from remote device. /**************** firstly *****************/ I downloaded tcp-wrapper, but NUT could not detected it. Previously I successfully configured and make NUT into my embedded system. It worked and UPS is recognized. I downloaded tcp-wrapper (Ver 7.6, most files in the package

I have a freshly built, updated EL6 system and am having problems with USB stability - at boot everything works fine but within a few hours, USB devices start disappearing randomly. At first I though the USB devices were suspect, but removing the suspect devices and an accessory PCIE USB card hasn't changed anything. As of now, a single USB device is working. (which is lucky, it hosts the

UPS - CYBERPOWER CPS DX600E upsc usb at localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1650 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 4.8 battery.voltage.nominal: 12 device.mfr: CPS device.model: DX600E device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2

> Subject: [Nut-upsuser] CyberPower DX600E won't switch up after power > is back > Message-ID: <3c530815d1ea602efdfec0d67eb1e0b1 at secretfatty.net> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Hello > I have an issue with an CyberPower DX600E, > it doesn't switch up when the power is back; after it has been > unloaded; > is it because

Hello, Just baught this ups to replace an Ellipse. I've had a look at the nut hardware compatibility list, it's fully compatible and uses the same driver as ellipse (usbhid-ups) Here is the error I get when I "/usr/bin/upsdrvctl start" : Network UPS Tools - UPS driver controller 2.6.5-Unversioned directory Network UPS Tools - Generic HID driver 0.37 (2.6.5-Unversioned

Hello I have an issue with an CyberPower DX600E, it doesn't switch up when the power is back; after it has been unloaded; is it because of one of those variables ? regards Franck #upsc myups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1380 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 4.7

> Also, I don't think we have any confirmation of the variables that the AP9620 provides. Here is the list of full 'upsc' output for various APC models: > > http://buildbot.networkupstools.org/~buildbot/cayman/docs/latest/ddl/APC/index.html Frantz, Actually, it would be useful if you could send a copy of the output of 'upsc', 'upscmd -l' and

Hi all, Thought I'd forward this on, as the apcsmart driver doesn't appear to have any support for this (admittedly obscure) setting and it doesn't seem to be listed at http://www.networkupstools.org/protocols/apcsmart.html. Hope someone finds it useful. Later, Russ -- Russell Odom http://www.gloomytrousers.co.uk/ Fast, cheap, good: pick two. -------- Original Message --------

On 12/26/18 8:55 AM, Charles Lepple wrote: > On Dec 25, 2018, at 4:07 AM, David Melik wrote: >> Lately I got (used) an APC Back UPS Pro 1000 and Back UPS NS 1080. I got an [8P8C]-to-USB cable from another UPS, but the Pro isn't detected (with usbhid-ups.) I haven't tried the NS yet but it seems to not be on the list though looks just like the Pro. >> > There are a few

On Dec 17, 2014, at 3:46 AM, Frantz de Germain <frantz at info.univ-angers.fr> wrote: > This seems to me a little bit complicated :-( Instead, can I use the > apcsmart driver with the provided 940-0625a c?ble (RJ45/DB9 connectors) ? Or > do I need to acquire an AP9620 SmartSlot expansion card, as I've seen in the > Hardware compatibility list page ? It sounds like you might

Hi everybody, I recently bought a UPS Cyber Power DX600E ad I'm trying to manage it through Nut under FreeBSD. Unfortunately, usbhid-ups returns an error when I do: [root at berkelium /usr/local/etc/nut]# /usr/local/libexec/nut/usbhid-ups -u root -DD -a onduleur Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31 debug level is '2'

Dear friends, I installed NUT and followed all suggested procedures to verify if my ups is supported. No driver recognized my ups, and the genericups tests get wrong. Here I send some informations about it: The ups model is APC BZ1200-BR I use Ubuntu, and the lsusb results Bus 003 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC for ups. The