Nut upsdev - Aug 2012 - UPS - CYBERPOWER CPS DX600E supported by usbhid-ups

UPS - CYBERPOWER CPS DX600E

upsc usb at localhost
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 1650
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 4.8
battery.voltage.nominal: 12
device.mfr: CPS
device.model: DX600E
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ugen0.00
driver.version: 2.6.3-Unversioned directory
driver.version.data: CyberPower HID 0.3
driver.version.internal: 0.35
input.transfer.high: 0
input.transfer.low: 0
input.voltage: 230.0
input.voltage.nominal: 230
output.voltage: 239.0
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 21
ups.mfr: CPS
ups.model: DX600E
ups.productid: 0501
ups.realpower.nominal: 360
ups.status: OL
ups.timer.shutdown: -60
ups.timer.start: 0
ups.vendorid: 0764

On Aug 30, 2012, at 5:18 AM, Petr Topiarz wrote:
> UPS - CYBERPOWER CPS DX600E
> 
> upsc usb at localhost
> battery.charge: 100
> battery.charge.low: 10
> battery.charge.warning: 20
> battery.mfr.date: CPS
> battery.runtime: 1650
> battery.runtime.low: 300
> battery.type: PbAcid
> battery.voltage: 4.8
> battery.voltage.nominal: 12
> device.mfr: CPS
> device.model: DX600E
> device.type: ups
> driver.name: usbhid-ups
> driver.parameter.pollfreq: 30
> driver.parameter.pollinterval: 2
> driver.parameter.port: /dev/ugen0.00
> driver.version: 2.6.3-Unversioned directory
> driver.version.data: CyberPower HID 0.3
> driver.version.internal: 0.35
> input.transfer.high: 0
> input.transfer.low: 0
> input.voltage: 230.0
> input.voltage.nominal: 230
> output.voltage: 239.0
> ups.beeper.status: enabled
> ups.delay.shutdown: 20
> ups.delay.start: 30
> ups.load: 21
> ups.mfr: CPS
> ups.model: DX600E
> ups.productid: 0501
> ups.realpower.nominal: 360
> ups.status: OL
> ups.timer.shutdown: -60
> ups.timer.start: 0
> ups.vendorid: 0764
Which OS is this? Looks like *BSD or Solaris?

Also, can you provide a few more details from this* list? In particular, it is
helpful to know if the shutdown sequence works.

* http://www.networkupstools.org/stable-hcl.html#footnotes
> Nut-upsdev mailing list
> Nut-upsdev at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
-- 
Charles Lepple
clepple at gmail

On Aug 31, 2012, at 5:26 PM, Petr Topiarz <topiarz at post.cz> wrote:
> Hi Charles,
> you're right, this is OpenBSD 5.1, I do not understand fully what you
mean by the shutdown sequence. I make my cron read the upsc output and tell the
system to shutdown if level is low. If the electricity supply is up again, my
server automaticaly wakes up, if this is what you mean.
> Peter
> 
Often people will either let upsmon send a shutdown command when the UPS reports
a low battery, or they use upssched to do so after a certain length of time on
battery. There are several different types of shutdown commands for an UPS, and
the support for them is not always consistent.
> 
> 
> Dne 31.8.2012 23:15, Charles Lepple napsal(a):
>> On Aug 30, 2012, at 5:18 AM, Petr Topiarz wrote:
>> 
>>> UPS - CYBERPOWER CPS DX600E
>>> 
>>> upsc usb at localhost
>>> battery.charge: 100
>>> battery.charge.low: 10
>>> battery.charge.warning: 20
>>> battery.mfr.date: CPS
>>> battery.runtime: 1650
>>> battery.runtime.low: 300
>>> battery.type: PbAcid
>>> battery.voltage: 4.8
>>> battery.voltage.nominal: 12
>>> device.mfr: CPS
>>> device.model: DX600E
>>> device.type: ups
>>> driver.name: usbhid-ups
>>> driver.parameter.pollfreq: 30
>>> driver.parameter.pollinterval: 2
>>> driver.parameter.port: /dev/ugen0.00
>>> driver.version: 2.6.3-Unversioned directory
>>> driver.version.data: CyberPower HID 0.3
>>> driver.version.internal: 0.35
>>> input.transfer.high: 0
>>> input.transfer.low: 0
>>> input.voltage: 230.0
>>> input.voltage.nominal: 230
>>> output.voltage: 239.0
>>> ups.beeper.status: enabled
>>> ups.delay.shutdown: 20
>>> ups.delay.start: 30
>>> ups.load: 21
>>> ups.mfr: CPS
>>> ups.model: DX600E
>>> ups.productid: 0501
>>> ups.realpower.nominal: 360
>>> ups.status: OL
>>> ups.timer.shutdown: -60
>>> ups.timer.start: 0
>>> ups.vendorid: 0764
>> Which OS is this? Looks like *BSD or Solaris?
>> 
>> Also, can you provide a few more details from this* list? In
particular, it is helpful to know if the shutdown sequence works.
>> 
>> * http://www.networkupstools.org/stable-hcl.html#footnotes
>> 
>>> Nut-upsdev mailing list
>>> Nut-upsdev at lists.alioth.debian.org
>>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
>