similar to: Document doesn't appear in dialog box

Hi I am using a HP LJ 4350 on samba 3.0.28 with cups as backend. We tried the HP PCL6 driver (not CUPS PS drivers), because it offers the possibility to print for example the first page on a different sheet from a different tray. This works fine, if a installe the driver on windows XP. If I install the driver on a samba server, a testpage shows no difference concerning driver files. But if i

hello I try to manage a printer (Apple Lawerwriter 16/600 ) with cups but without succes !!! with cups web interface : I "add a printer": device = LPD/LPR Host or Printer URI= lpd://mymachine/lp Type= Apple Model = Apple LaserWriter16/600 Foomatic/Postscript (Recommended)(en) I try to print a testpage but without succes - 'mymachine' is either in my dns and my /etc/hosts

We have a strange problem with some printers on a Windows XP host: When we print a testpage from the linux server (RedHat 8), there's no problem. But when we configure the printer on our Windows XP client and we want to print a testpage: nothing happens and we get the "windows troubleshooter". When we print a Word document to the same printer on the same Windows XP client, the

My test is OK.....Thanks a lot.... There is a mistake in cups exemple web interface.... gb. ----------------------------------- Your URI is incorrect if your printer is a network printer the correct URI must be : lpd://myprinter ----------------------------------- St?phane PURNELLE stephane.purnelle at corman.be <https://lists.samba.org/mailman/listinfo/samba>

Hello, I have a problem with the point'n'print driver installation. I followed the instructions on https://www.samba.org/samba/docs/man/Samba-HOWTO-Collection/classicalprinting.html#id2626650 Now if I try to print on the Windows client I get an error 0x00000006. Here is my configuration. Printer: Kyocera FS-C2026MFP+ Server: Debian Squeeze, Samba version 3.5.6, CUPS cersion 1.4.4 Client:

I'm new to Wine and I've been assigned a project to convert a headless windows application to run under Wine. The application needs to output a print job to a PDF file. It looks like I can use cups-pdf. I need the ability to send output to different paths based on the type of report so I think I can setup CUPS printers for each report type so it gets routed to the correct path. Since it

hi, this is my first post on this list, i hope i do everything right :) so, this is my situation: there's a small network (about ~30 PCs), most of which are running XP pro, some Vista (if the latter would complicate things a lot, we could forget about them) there's a server running ubuntu, to which a Brother HL5150D printer is attached; printing using cups works fine, and if i set samba

regarding this old message: > > Am Sam, M?r 20, 2004 at 04:40:10 -0500 schrieb JLB: >> Nopers, and it FREAKS OUT when I go into Printer Setup and select a page >> orientation (e.g. Portrait) > > Hmmm, seems that you first have to learn how to configure printing? Look > in the Documentation section on winehq for that. If you use Cups > everything is done for you

On Tue, 06 Dec 2016 15:26:32 +0100 Heinz Hölzl via samba <samba at lists.samba.org> wrote: > Hi list, > > i have a samba member-server in a samba4-AD with cups. > cups works fine, i can print the testpage from cups and from a > windowsclient. but, i am not able to upload a printer driver to a > samba4 print-server: > > i followed this howto: >

Hi all, I work with a CUPS/Samba Printserver and I allocate the drivers via the point n print methode. Yesterday I get a new HP Laserjet 2420. I installed the HP-driver with the APW of Windows XP. Everything seams to be ok. I printed a testpage without any problems. In the next step I tested the new options of this printer (duplex,...). But I saw, that the driver did not offer this options. I

Hello, please help me: After searching for nearly 2 weeks for a solution, I have to ask for assistance: System: debian sarge - update from an working installaton on woody (without printing) Now the samba server joins ADS, authenticates users, but should also provide printers. I have installed cups, configured my smb.conf: --------------------------------- [global] load printers = yes

Hy guys! I have a problem with my samba configuration. I really hope you can help me out here, since I am pretty new to Linux and still try to figure it out. So, here it goes: I hava a "server" running SuSE 8.0 and should work as a firewall and printserver. I started out setting up the homes share, which works like a dream. Next the printer. Installed the printer with cups, test,

Hi Folks, fresh CentOS 5.5 x86_64. One USB-printer connected (HP Business Inkjet 1200) Printing from localhost:631 (Testpage) works. But no from any application. From OO only the message: printer-problem - no more. Second printer is from far (Cupsd) in the network. Works well. But what's about the local printer? Any hints? Thx Timothy

Dear list, I've upgraded my server from Etch to Lenny and now the printer (HP LaserJet 6P) does not work any more through Samba. Printing a testpage via http://server:631 works perfectly so I skip giving details about the CUPS setup. Also lpstat reports the printer working # lpstat -a HP_LaserJet_6P accepting requests I tried to rerun cupsaddsmb. The driver files are copied to the

I have ongoing issues with my Xerox Phaser 2550 printer under Centos 7. It always worked without any issues on Centos 6 before I upgraded to Centos 7. The problem manifests itself by regularly (but not every time) printing page after page of garbage instead of the document that I wanted to print out. Sometimes it works, sometimes it doesn't. The same document might print fine now but then

Hi Folks, CentOS 5. I've installed a new printer - HP LaserJet Pro M1132 MFP Cups recognized it as HP LaserJet 3020 3030 Postscript URI: usb://HP/LaserJet%20Professional%20M1132%20MFP I try to print a testpage: No error message appears in access.log localhost - - ......................... Get-Jobs successfull-ok nor in error.log Completed successfully But also no printed

Given the config provided as requested, any clues? TIA 23.03.2017 20:26, PF4Public via samba wrote: > Here is the requested config: > > [global] > workgroup = workgroup > netbios name = server > server string = %h server > wins support = yes > dns proxy = no > name resolve order = host wins lmhosts bcast > interfaces = 127.0.0.0/8

I've samba 3.6.6 with cups 1.4.4 running. Printing from XP and 2003 works, by just browsing to the printers folder on the samba server, connecting with automatic download of the printer driver. I also succeeded uploading a 64bit driver using the 2003 server. So 32 bit world works smoothly. When I try to connect from a 2008R2 server, I get "could not connect, error 000006d1".

I am running a windows executable, using wine, in a 'batch mode' - ie multiple times with different command parameters to the executable. For some parameters, the 'Program Error' dialog box appears and the wine process does not continue until the dialog box is closed. Is it possible to suppress the dialog box such that the entire batch can be completed without intervention?

Hello all, I have Samba installed on a Solaris 8 system. When I try to connect from a WIN XP client I get an authentication dialog box With the user name Guest. Three is no apparent way of changing to another user. What must I do so that I can login as any valid user? Thanks Gerard