similar to: Cannot see Samba server on different network

Is there a way to prevent browselists from machines other than those of my choosing to show up in the browselists/network neighbourhood? I don't want win95 clients that offer shares themselves to show up in the network neighbourhood. Michel. -- Michel van der Laan - michel@nijenrode.nl http://www.nijenrode.nl/~michel

Hello, Your VPN does not pass through Netbios. What kind of VPN are you using? Openvpn does netbios Pass trough. Did You "interfaces=IPinyour192.168.0.0/24 IPinyour172.16.15.0/24..." In your smb.conf to make samba send browselists in your 172.16.15.0 net?? ----------------------------------------------- EDV Daniel M?ller Leitung EDV Tropenklinik Paul-Lechler-Krankenhaus

Hi, I'm trying to generate a multiple domain browselist but I don't get it to work. I've tried everyting by the book but the result is always the same: I can see the other workgroup(s) but they are empty. Currently I've added the following rules to the smb.conf remote browse sync = 192.168.2.2 192.168.2.4 remote announce = 192.168.2.2 192.168.2.4 As far as I understand

Can a router between two subnets (call it A and B) be the local master browser of the one subnet (net A) in a NT domain, when the Domain Master Browser (as well as PDC and BDC) are located in the other subnet (B)? Will say, does the Domain Master Browser of a NT domain accept a Local Master Browser in the same subnet (as the router is accessed from B via the interface ethB)? The reason for my

Hi everyone, I'm running Samba 1.9.18p10 and it works great. But I can't get it to announce to other subnets that are on the other side of a router. I've added "remote announce = 192.168.1.255" to smb.conf (my machine is in 192.168.0.0 subnet) and there are no other NT machines in any of the subnets. What should I look for? Thanks, Joe

Hi folks, I''m new to Xen so apologies if this is a stupid question. Setup is as follows: Dom0 and DomU''s running Hardy Heron Kernel 2.6.24-16-xen Xen version 3.0 My problem is I want to run TShark on DomU to see packets sent to eth0 on Dom0. TShark on Dom0 can see packets sent to DomU on eth0 but DomU cannot see packets sent to Dom0 on eth0. I know the eth0 on DomU is a

Hi. I've done something to disallow the access to home directories. Permissions to these directories are the same as when they worked. The only major change is that i added a few shares(4) last evening. I've obviously done something...can't figure out what it is. Any help is grately appreciated. TIA Jeff --- Details --- As user jdyke - on a successful connect to 'Engi'

When I build an smb.conf using a line like: include = /usr/local/samba/lib/%G.conf then it works beautifully for the shares that are listed in the appropriate <primary group>.conf files, that is, I can connect to them and all... However, I can only _browse_ the shares listed in the main smb.conf file, not the ones in the <primary group>.conf files that should be included, even

Hi I had installed and configured 2 IAX server , users from 1'st server can dial to the second server and vice versa But when I make calls to users in other server , on my client , I get the caller if as asterisk@192.168.20.99 , the same I get when I try reverse , ie I get on my cleint caller id as astersik@192.168.20.32 Please guide me what

Scenario: One Samba server with multiple network adapters each hooked to a different network. Question: How can I configure Samba (nmdb) to show different shares when browsing the Samba server from clients connected to the different networks? Background: The nmdb is always running in a single instance, doesn't matter how often it is started. Regards Richard

At the end of the 'Details:' section of the help on Anova (car package), it states: The standard R `anova' function calculates sequential (type-I) tests. These rarely test meaningful hypotheses. So I thought I'd try it. However, I was perplexed to get this message: Browse[1]> Anova.glm(leaf.glm1, type ="II") Error in terms.formula(formula, data = data) :

I investigated why I was getting this error message... Error in Ops.factor(groups[subscripts], vals[1]) : Level sets of factors are different which led me to putting a browser in panel.superpose: Called from: panel.superpose(x, y, subscripts, ...) Browse[1]> vals vals [1] 1 2 3 Levels: 1 2 3 Browse[1]> groups[subscripts] groups[subscripts] [1] 1 2 3 1 2 1 2 3 1 2 3 1 2 3 Levels: 1 2

Hello, please dont come and say one instead of every windows machine in your network, although it is something I would like to see happening.. my network has two lans A and B, I plan to install a SAMBA server in network A and have it act as a WINS Server too. I've been reading the online version of "Using Samba" and I am confused about the Local Master Browser issues, from the

Hi @ll, BUGS #1 & #2: ~~~~~~~~~~~~~ The installer LLVM-10.0.0-win64.exe dumps the following DUPLICATE files in "C:\Program Files\LLVM\bin", WASTING about 500MB disk space, which is nearly a third of the disk space occupied by the whole package: | DIR "C:\Program Files\LLVM\bin" /O:-S ... | 25.03.2020 12:15 83.258.880 clang-cl.exe | 25.03.2020 12:03

Hi folks, i'am still confused when searching around for samba4 adc, wins and browselist. In my DCs smb.conf I have activated the server service nbt, defined wins support = yes and could not see my domain controller in browselist. Before provision from samba3 with ldap, I renamed the pdc, because the old one had the same name like the domain (was working well over years). Today my

A machine with a fresh installation of Suse 9.0 can reach the router and the internet, is set to belong to the local workgroup, but cannot see the other three Windoze boxes (xp, w2kpro) and cannot be seen by them. smb.conf looks correct according to the documentation & FAQs I have seen. Obviously I'm missing something crucial; any hints on what that might be would be most appreciated. --

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I had a working 2.0.6 samba on a RH6.2 system with a 2.4.14 kernel. Clients are all win98/win95 except a win/me laptop. I recently upgraded to 2.2.3a ( from source) and since then I cannot see any of the clients in the "network neighborhood". I cannot even see the workgroup under the "entire network". All clents are

Hi all, I have the following problem which haunted me for a very long time, and I did not found an solution for as long as I searched: Laptop: - Windows 8 Pro 64bit (happened also on Windows 7 Home Edition 64 bit) - 5 network drives are set up in this computer: 4 drives are guest accesible and one is accessible using specific user and password (retained by Windows) Server 1: Ubuntu Server

I''ve seen a lot of threads w/ similar problems, but none have posted a resolution. I am using Debian 4.0r1 (Etch). I was using the xen packages from stable, but have tried w/ testing as well and the problem persists. http://pastie.caboo.se/95144 Host is 10.0.0.20 on network 10.0.0.0/24. Dom0 is thus 10.0.0.20 DomU is 10.0.0.30 When the bridge is enabled, DomU can ping everything.

Hi all! This is a repost to this list, hoping to draw some extra attention because I got NO reply whatsoever to the original posting :( I would really appreciate if someone could comment om which of both strategies as described below is best. I am having some trouble with a samba domain distributed over 2 subnets (192.168.0.0/23 (supernetted) & 192.168.4.0/24). These subnets are