similar to: Remote win98 refusing to connect to samba server

I am having a problem with some Windows 95 PC's . I had Samba 2.0.5 installed on a Sun system with Solaris 6, and a local network of PC's with W95 and W98, and everything was working fine. I then installed a new server with Solaris 8, and changed the IP addresses on the network, and the W98 PC was fine as was one of the W95 PC's, but 2 W95Pc's cannot see the Samba share, if I do

All, As some of have no doubt found out, scripting is subtly different on 95/98 machines and NT machines. I have a logon script called by: logon script = xxxx\main.bat %G %U that works great for NT boxen. However it does absolutely nothing, no execution of main.bat at all for a W98 client. If I remove the parameters so it is: logon script = xxxx\main.bat it executes on the W98 box,

We have a network of apx 200 NT's,W95 & W98 using an NT machine for WINS resolution. Our dept has apx 15 W95/W98 machines hooked to a hub off a switch from the main network. I would like to setup SAMBA to act as a WIN server for just these machines. Is it possible to do without changing subnets? Now to complicate the question. Network login is done via an NT machine as well. If we

Hi everybody, we are currently running a small network with a samba server and a few Windows _95_ workstations. The server stores roaming profiles for all users and provides authentification (logon scripts, policy file, ...) Now, we are planning to add a Windows _98_ workstation. Q1: Will Win95 and Win98 be able to work with the same user profiles, policy file etc? If not, what can I do? Q2:

Hi! I?ve just upgraded from w95 to w98 and now I can?t login to the samba server anymore, it does not accept the passwors. NOthing has been changed on the server. I run samba-1.9.16p11. Peter

On 03/11/18 02:31, Robert Heller wrote: <snip> > Yeah, there are very few of us that completely skipped > MS-DOS/MS-Windows/MacOS-Clasic and *never* used a graphical file manager or > any of the eye-candy that people now believe is "standard" or "normal". I > went from VMS on a VT<whatever> to a VAXStation 2000 to a VAXStation 3000, to >

Hello all. I am sure that this is an FAQ but I cannot find a succinct answer anywhere. My question is: What is the correct way to access a Samba share when the Samba server has a private IP adress (eg 192.168.x.y), the (Windows via PPP) client is assigned a relevant private address (eg 192.168.x.z) and the username/password used to login to the client is not known to the server and/or is

Hi All I have a working samba server on RH Linux 7.3 (samba v2.2.4). My shares and printers can be connected and used by my W95, W98 and XP clients - no problems there. However, my Apple (Powerbook G4 running OSX 10.1.4) cannot connect using the Connect To Server option: smb://10.0.1.200/data Or smb://alan@10.0.1.200/data The nmblookup -B MAC_MACHINE '*' command does not see the Apple

Has any one seen this? Samba v2.0.4b running on SunOS 5.7 and another on SunOS 5.6 Everything works great under W95,W98, NT4 and Win2k except you are unable to rename folders from a win2k machine Error Renaming file or folder Cannot rename %name_of_folder%:Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use. OK You

Hi all. IF Iam WRITING TO WRONG SAMBA LIST PLEASE TELL ME THAT, I GOT A LITTLE CONFUSED ABOUT THE LIST NAMES I just suscribed to this list and i want to say that i started use samba moustly for file and printer sharing. All ok till now , only two cuestions I need to set up a share folder for two users only , i made some like [folder] valid users usr1 usr2 printable no writable yes

> Date: 30 Nov 1998 20:22:27 GMT > From: mathog@seqaxp.bio.caltech.edu > To: mlist-samba@nntp-server.caltech.edu > Subject: W95/98 connect to any SMB share as another user? > Message-ID: <73uuq3$s7j@gap.cco.caltech.edu> > > map H: as \\machine1\share1 as username=John, password=JohnsPassword map > M: as \\machine2\share2 as username=Jane, password=JanesPassword >

Dear list, I encounter a strange problem: I hav R (1.6.1) installed on a notebook with winXP-Prof and a similar installation (same path names etc.) on a desktop computer with W98. I use rcmd BATCH filename to display graphs from the data stored in filename. With R on my notebook everything works fine. I have the same data, the same filenames, the same paths on th w98-computer. Here I see just a

hello! basically what is the difference between DCOM95 and DCOM98? if i change from 95 to 98, what kind of effects should it make to my apps under wine tnx! rxon -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.winehq.org/pipermail/wine-users/attachments/20040816/18462dc5/attachment.html

ok ok I have set up a public directory under /home/public on a linux machine configured as a Samba Server. The configuration of the /etc/smb.conf file is like this: [public] comment = Public directory path = /home/public browseable = Yes writeable = Yes I can see the directory from a w98 client and can open/run the files. But I do

I've recently set up a new server running RH 6.1 and Samba 2.0.5a. All our older servers are running 1.9.18p10, and were left that way on the "If it ain't broke" principle. On the new server, I've noticed that DOS wildcards don't work correctly for some (but not all) old 16-bit DOS programs running under Win95/98. The symptom is that the program only

Greetings, I am trying to get samba3 to work well with W95. The windows 95 box can see the samba server, but cannot authenticate (claims wrong password) to get to any shares. I know the smbpasswd is good as I can authenticate and get to the shares using the same account and password on a W2000 machine. I suspect I am doing something wrong in the [global] section of the samba server. Would

I've got a W98/Samba LAN running with a 3Com OfficeConnect LANModem for shared internet access. Periodically, like every 10 minutes, it dials out, due to a DNS request for the workgroup/domain (same) name. Any fix for this? Can I just put a dummy address in all the host files? Ed -- Edward Schernau http://www.schernau.com Network Architect mailto:ed@schernau.com Rational Computing

Hello, I am having a problem with accented folder and win98. the setup is PDC (under NT) , a Linux Samba as a file server added to the domain (smbpasswd and winbind) and a W98 client in any share, if i create a folder named "aaa" for exemple i can get in it. but if i create a folder named "???" or any accented char i just can get in it. Windows Error : no such file or

Hi all. We have been denying NFS access to our Linux et al users since they can of course set their uid to whatever they want. So we tell them to use smbfs. But when I just tried experimenting by mounting my own network share on my Linux box via smbfs, and created a few files, I loo on the serevr and the files are all owned by root?! This has got to be a configuration issue right? -- Mark E

Hi! I have installed Samba 1.9.17p4 on Linux server. PC with Windows95 and Windows NT( with registery set to enable plain text password) are connected without any problem. But PC with Windows98 are not. Can anybody help me to resolve this problem? Thank you. Best regards, Oleg Kustov