similar to: where to get timesync.pif ?

Hi! I can't find this bug in FAQ: VisualC++ 5.0 alwais complains "This source file has been modified outside the source editor. Reload?" Sources are located on the last samba server under Linux. System clock on Linux is set to Greenwich, zone offset applied. I tried to set NT clock to be more than Linux, this does not help. -- Andrew

Rudolf Kollien email: Rudolf.Kollien@medas.de Rudolf.Kollien@kollien.de *************************************************************************** Never trust a operating system you have no sources for *************************************************************************** Buying an operating system without source is like buying a self-assembly Space Shuttle with no instructions.

If you don't want to type the ip adress of your samba server every time you connect, add a entry to your local hosts file and lmhosts file. You will find this files (and sample files with extension ".sam") in the windows main directory of Win95 and under "system32/drivers/etc" on WinNT 4.0. Regards, System-Consulting Kollien Rudolf Kollien Email: kollien@kollien.de Our

Antigen for Exchange found Gizn.pif matching FILE FILTER= *.pif file filter. The file is currently Purged. The message, "Have a humour Lady Day", was sent from konkurs and was discovered in IMC Queues\Inbound located at WRQ/Seattle/ABRA.

Hi ! Starting the smbd, I get the following output in samba.log and i cannot connect to samba (from Win95): [1999/10/05 09:47:27, 2] interface.c:(213) Added interface ip=129.103.47.94 bcast=129.103.47.255 nmask=255.255.255.0 [1999/10/05 09:47:27, 1] files.c:(216) file_init: Information only: requested 10000 open files, 1014 are available. [1999/10/05 09:47:27, 2] server.c:(716) Changed

Hi, I've been looking through the news archives but haven't found this.. Perhaps I just didn't see the forest for the trees... :) My question is about the format of text files. Files created on Linux show up on Windows (via samba) without the newline. Is there a parameter setting that I'm missing? How do I get compatibility between the two? Thanks, Mike -- "My Humility

Package: xcp-xapi Version: 1.3.2-6 Severity: minor Tags: upstream If xe pif-configure-ip called twice with different IP, it did not remove old IP from interface (but didn't store both addresses in database). (Checked for management interface) Steps to reproduce: xe pif-reconfigure-ip uuid=... ip=IP1 .... xe pif-reconfigure-ip uuid=(same) ip=IP2 ... 'ip addr show' shows both

Hi everyone, I'm running Samba 1.9.18p10 and it works great. But I can't get it to announce to other subnets that are on the other side of a router. I've added "remote announce = 192.168.1.255" to smb.conf (my machine is in 192.168.0.0 subnet) and there are no other NT machines in any of the subnets. What should I look for? Thanks, Joe

I have an Access application that work with some shared database file. The file is ~ 3 Mb. Since I have a Linux system with Samba, this application work very slow. I have multiple user with win95 on this file. Is there an option for allowing multiple access without cache ? any other idea ? Thanks. ___________________________________________________________ S?bastien HEITZMANN

Hi! I've installed RedHat 6.1 on a Pentium 233. I'm using samba 2.0.5a which came with RH6.1. On another PC (Pentiun-II 400) I've installed Windows NT 4.0. These two PC's are connected to the same network. I've configured Samba to share the home directories on the Linux System. I'm able to reach my own homedir from NT. Within NT I've assigned this share to drive L.

Package: xcp-xe Version: 1.3.2-8 Severity: minor When autocomplete for bash is activated following misbehavior happens: xe pif-list params=device,m[Tab] expected behavior: autocomplete to xe pif-list params=device,management actual behavior: xe pif-list params=management ('device' removed) -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500,

You must create a output filter. Edit /etc/printcap and add your client printer like this: ... PC-PRINTER:\ :sd=/var/spool/lpd/PP01:\ :mx#0:\ :lp=/dev/null:\ :if=/var/spool/lpd/Filter/PP01:\ :sh: ... Adjust the printcap parameters as needed (spool directory, directory to find the filter script). Make sure the lpd can access the directory. Consult your manual. Now create the filter

Hi there everyone, I recently upgraded to 2.0.6 from 2.0.5a in a hope to improve data integrity (I was having oplock_break problems that would affect the integrity of a lot of Excel files). So far so good with the oplock_breaks (even with oplocks reenabled). :-) However, I've started having problems with the clients' Windows profiles not being placed in my defined logon path.

Package: xcp-xapi Version: 1.3.2-13 Severity: critical I get this bug when installing XCP and configuring the network portion of it. When I issue the following command: xe pif-reconfigure-ip uuid=$PIF_UUID mode=static IP=10.0.0.10 netmask=255.255.255.240 gateway=10.0.0.1 DNS=10.5.1.2,10.5.1.3 My network interface looks like this (Broken): eth2 Link encap:Ethernet HWaddr 00:50:ec:24:c7:43

Hello, I'm having a problem configuring samba (2.0.5a) on a Linux system using NIS+ as the password system. Samba complains that it cannot find the smbpasswd file, which is not surprising as I'm not using one. I tried 'smb password file = passwd.org_dir' that sort of worked, except that it creates a directory called passwd.org_dir from whatever directory I ran the smbd from.

Hi, this is a new user who is trying to reach the local network, managed by a windows NT server. I have edited my smb.conf file (which I include) so to be able to reach the network drives and the printers on the ntserver locally. When I try to see what is available using smbclient at the prompt, I cannot see which are the Services available (sharename fields empty), but I do see a lot of things

I've exactly the same problem. My config looks similar to yours: 1 samba as wins server (wins support=yes" on one segment, 1 samba as "wins server client" (wins server = xxx). The "wins server client" never discards machines from segment 1. I looked at the browse.dat and the wins.dat on the server on segment 1. There are no entries of the shutdowned maschines. Only in

My wine installation works perfectly with many apps. However, when I am trying to install one Win app (Parashara's Light) through wine, I am getting the following error: <errorcode> 16 bit DOS subsystem: C:\windows\temp\dosshell.pif Invalid program file name. Check your pif file. The pif seems to be in some weird format. Cat produces following output: cat "/[path to wine

Good day. Few month ago I reported bug when vif was added as PIF to database. Now I found way to reproduce this: xe vif-create network-uuid=$NET_UUID vm-uuid=$DOM0_UUID device=1 mac=f4:03:02:01:00:01 xe vif-plug uuid=$NEWVIF_UUID xe pif-scan host-uuid=$HOST_UUID xe pif-list root at lab-xh4:~# xe pif-list uuid ( RO) : 62cdddc5-89ad-38e0-e9af-879df66e409d

ALERTA: ARQUIVO PROIBIDO Nosso sistema de inspe??o de conte?do encontrou um arquivo proibido: your_document.pif em sua email para o destinat?rio: -> gleydson at cipsga.org.br A entrega da mensagem foi bloqueada! Por favor, verifique seu sistema. Ele pode estar contaminado por v?rus. Para sua refer?ncia, aqui est?o os cabe?alhos da mensagem com problemas: ------------------------- BEGIN