similar to: SOLVED : (NEW Printing FAQ Question) : After almost every reboot, Samba printing is DOA under Solaris 2.6...

I just thought that I would put this out there and see if anyone else sees this problem with Samba 1.9.18p4 (under Solaris 2.6). It appears that after some reboots of Solaris, Samba printing is partly dead. What I see in the logs are below, and what happens is that the file to be printed is spooled to /var/spool/samba, like always, but when the lpr command is issued it croaks. I've been

Ernie, Thanks for the great info.. Based on what you were seeing, would you suspect that part of the problem is with the combination of NT and the 3com card (3c595)? Currently, we are ONLY seeing this under NT Workstation (not server) and almost all of our machines have this same 3com 3c595 card (only if using 100BaseT).. -- Rick -----Original Message----- From: Ernie Oporto

Ok.. Just for the record, I STAND CORRECTED! The problem does appear to be NT.. The thing that irritated me was that nobody was interested in giving any backup data! Everyone just wanted to blindly admit that it must be NT. Ok.. Enuf bitching.. On to the better stuff... Anyway, David Mansfield and I are trying to narrow down the machine configurations where this happens.. Currently, we've

> Date: Wed, 5 Aug 1998 11:20:57 -0400 (EDT) > From: Dan Roscigno <ddr@phys.ufl.edu> > To: Multiple recipients of list <samba@samba.anu.edu.au> > Subject: Re: SAMBA digest 1769 > Message-ID: > <Pine.SOL.3.96.980805111839.9665I-100000@neptune.phys.ufl.edu> > > > Hay, > > I have a big problem with the stop e start smbd. > > I start the samba

2015-04-02 16:50 GMT+02:00 Panagiotis Kritikakos < panagiotis.kritikakos at nikitec.gr>: > Hello Arno, > Hello Panagiotis > Thanks for the quick reply. FreeNAS is FreeBSD-based. > > Yes, I could test a patch. > > As I have mentioned, this behavior is not seen at every single reboot but > after most reboots. Also, some times, the connectivity can be lost without

Hello Panagiotis 2015-04-03 14:28 GMT+02:00 Panagiotis Kritikakos < panagiotis.kritikakos at nikitec.gr>: > Hello Arno, > > Question: have you also tested oldmge-shut? >> Otherwise, that might be interesting to do so and send back the results >> of these tests... >> > Yes, I've tried this as well with worse results unfortunately. This driver > seems to

Hello Panagiotis 2015-04-01 16:28 GMT+02:00 Panagiotis Kritikakos < panagiotis.kritikakos at nikitec.gr>: > Hello all, > > OS name: FreeNAS 9.3 > NUT version: 2.7.2 > NUT installed method: Bundled with FreenNAS 9.3 > Device: EATON 5SC 1000 (http://powerquality.eaton. > com/Products-services/Backup-Power-UPS/5SC.aspx?cx=5& >

Hi Panagiotis 2015-04-06 9:13 GMT+02:00 Panagiotis Kritikakos < panagiotis.kritikakos at nikitec.gr>: > Hello Arno, > > Can apply the patch directly or should I recompile nut? > not sure to fully understand your comment, but... this is a source code patch, so you indeed have to apply it to the NUT source code (from within the source tree, "patch -p1 <

I am running Samba 3.0.9/KRB5 1.4 on Centos 3.4 on x86 with security = ADS in a Win2k3 domain. I have successfully used kinit to authenticate, joined the domain, and wbinfo -g/-u/-t return the expected results. However, when I try and access the samba shares from a Win2k3 box, it fails telling me I don't have permissions to access the share. Needless to say I am thoroughly perplexed. I have

Hello Arno, FreeNAS doesn't come with a compiler and I had to compile with the patch on FreebBSD-9.3 and then copy the produced mge-shut. Unfortunately it didn't work out. For every try I was getting "Connection Refused" and when I tried /usr/local/libexec/nut/mge-shut -D -a <ups_name> I was always getting 'No matching HID UPS found'. I returned back to the

Hello Arno, Thanks for the quick reply. FreeNAS is FreeBSD-based. Yes, I could test a patch. As I have mentioned, this behavior is not seen at every single reboot but after most reboots. Also, some times, the connectivity can be lost without even rebooting. That is not very often can have happened a few times. Best regards, Panagiotis On 2/4/2015 5:44 ??, Arnaud Quette wrote: > Hello

Hello Arno, > Question: have you also tested oldmge-shut? > Otherwise, that might be interesting to do so and send back the > results of these tests... Yes, I've tried this as well with worse results unfortunately. This driver seems to be even more unstable. When it gets able to set communication with the UPS (which is not always the case), it usually lost it again after a while.

Please don''t download 1.2.7or install -- it''s quite broken. I''ll have 1.2.8 out shortly .... -Tom -- Tom Eastep \ Shorewall -- iptables made easy AIM: tmeastep \ http://www.shorewall.net ICQ: #60745924 \ teastep@shorewall.net

Hey, all. While ADA can still be downloaded, that's about all that I see. No development, no recent mention, and -- perhaps worst of all -- it appears not to work properly under 64-bit systems. So, assuming Digium's abandoned it, are there any suggestions of alternatives? Right now, I'm replacing a Shoretel system, and I'd *dearly* love to avoid the incredibly fat client they

Help... Both beta4 and now beta5 die immediately at startup for me: Apr 7 14:29:32 emerald dovecot: [ID 474997 mail.info] Dovecot v1.0.beta5 starting up Apr 7 14:29:33 emerald dovecot: [ID 128275 mail.error] Auth process died too early - shutting down My setup: Solaris 9, built with gcc 4.1.0, IMAP only, mbox format, INBOXes NFS mounted, index and other mail folders local disk. Beta3

DOM0:~# xm create /etc/xen/Windows.sxp Using config file "/etc/xen/Windows.sxp". Error: Domain ''Windows'' does not exist. DOM0:~# cat /var/log/xen/qemu-dm-Windows.log warning: could not open /dev/net/tun: no virtual network emulation Could not initialize device ''tap'' did i see this right, that there is a bridge error ?

This is still a apain, nmbd just dies off and therefore fails domain logins.. log shows: ***** [2004/06/26 19:43:15, 0] nmbd/nmbd.c:reload_interfaces(263) reload_interfaces: No subnets to listen to. Shutting down... then next day when ppl boot up their horrid XP boxes and try login we need to restart samba for them, this is a very big pain being daily event. # nmbd -V Version 3.0.4

Ok.. I've tried tweaking several settings on Samba (1.9.18p4) in order to try to keep it from killing several machines that get backed up weekly via Amanda (using smbclient). What always appears to happen is that for one reason or another, Samba is booking along copying files and then all of a sudden NT stops communication and smbclient ends up hanging forever (regardless of the keepalive

Hello all, OS name: FreeNAS 9.3 NUT version: 2.7.2 NUT installed method: Bundled with FreenNAS 9.3 Device: EATON 5SC 1000 (http://powerquality.eaton.com/Products-services/Backup-Power-UPS/5SC.aspx?cx=5&wtredirect=www.eaton.com/5SC&GUID=B81251A4-F34E-4373-94B3-B4FB3D0CBCA8) Problem description: This was originally reported as bug to FreeNAS

AIX 5.1 / SAMBA 2.2.5 SAMBA server is a host server only (no PDC / WINS etc) in a 2000 AD domain. All shares can be accessed / authenticated correctly when mapped or called. But when a client browses MicroSoft Network Neighborhood the server does not show up. It does show up in Active Directory. We've still got users that cannot get away from Network Brotherhood usage. Kirk Shimek