similar to: Liebert driver with usb to serial converter cable

2009/10/19 Jobbagy Robert > |Hi Arnaud! Hi Robert, > I'm a hungarian developer and I need make a linux driver for this ups: > "Liebert" ? ? ? "ups" ? "5" ? ? "UPStation GXT2" ? ? ? ?"contact-closure > cable" "liebert" (I copied it from your previous mail) > So please help me,where should I start it ? > > |Thank

Hi guys, I found the troblue and fix it! I attached the patch. The trouble was in the command reply buffer use. You compute the value that value = reply[6]*256+reply[5] <- it's wrong The right solution: value = reply[5] * 256 + reply[6]; And other bug, battery.runtime compute, you divide this value 60 <- it's wrong right value: divide 1.0 I continue the work on this

Hi Guys! I'm back and work on this driver again. First, I checked out the HEAD rev and tried the liebert driver. it gave wrong model,firmware,serial, mfr date value. caused by len variable in line 97 and after I use my ups with usb -> serial converter. these patches attached Did you try the liebert-esp2 driver in ON Battery mode ? Because If I switch my ups on battery (plugged off the

Hello, 1) I'm planning on adding lots of measurements to the driver liebert-esp2 + correct support for 3-phase systems. Should I make a large patch based on the last svn head or send you the whole file? Multiple patches per change are probably not practical in this case. 2) in http://www.networkupstools.org/doc/2.2.0/new-names.html there is no crest factor variable. Crest factor is very

Attached. I also attach sample output from upsc OL & OB. I only tested it with 3-phase in/3-phase out ups. Thanks, -Spiros -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100421/1d18bd30/attachment.htm> -------------- next part -------------- battery.current: 0.00 battery.runtime: 4860

2009/10/15 Farkas Levente <lfarkas at lfarkas.org> > hi, > i read your thread at: > > http://lists.alioth.debian.org/pipermail/nut-upsdev/2009-January/003772.html > > http://lists.alioth.debian.org/pipermail/nut-upsdev/2009-January/003775.html > we've got exactly the same problem that we need a nut driver for liebert > ups. is there any progress in this field?

Hi all! I checked out the rev2366(it's stable NUT 2.4.3) and patched last liebert-esp2 revision + spiros last code. After, I used autoreconf --install and I gave the follow error msg: configure.in:86: error: possibly undefined macro: AC_C_FLEXIBLE_ARRAY_MEMBER If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. configure.in:87:

Hi guys, I wrote for Arnaud that I tested the liebertgxt2 driver in 2.4.3. I compare output of Richard's code, Spiros code and nut 2.4.3. Output of Richard and Spiros codes was same and right. Output of Liebertgxt2 driver isn't. Examples: Our UPS : Liebert GXT2-1000RT230 Model Name,Firmware version,SN,date of manufactured values was right. Fields

2009/1/22 Spiros Ioannou <sivann at gmail.com> > Cher Arnaud, > Hi Spiros, > I send you a demo that reads info from an Emerson Liebert > GXT2-10000T230 through the RS-232 port. This uses the "ESP-II (ESP 2) > Protocol". > Current supported data includes: measurements (voltage, temperature, > etc) , ID strings (serial number, etc), status flags (inverter on,

hi, we working together with robert to make liebert ups with nut. there was a good revision 2431 which gives a good result for us. this revision call the driver gxt2. after that you change the name to esp2. unfortunately this version (and the current head too) contains the same bug what was previously fixed in the gxt2 branch. it'd be useful to port the fixes to the new esp2 branch too. the

This patch adds support for the following ups to liebert-hid.c: $ lsusb | grep Liebert Bus 007 Device 005: ID 10af:0001 Liebert Corp. PowerSure PSA UPS Using this patch, I'm able to obtain information about the ups via upsc: $ upsc upsname battery.charge: 100 battery.runtime: 1012 battery.type: PbAc battery.voltage: 1172 battery.voltage.nominal: 12 driver.name: usbhid-ups

On Fri, Apr 30, 2010 at 5:29 AM, Robert Jobbagy <jobbagy.robert at gmail.com> wrote: > > 2010/4/29 Arjen de Korte <nut+devel at de-korte.org> >> >> PS And do *not* top post. > > What is it ? I don't understand it , sorry. http://www.arm.linux.org.uk/mailinglists/etiquette.php#e3 Let's say you send an email to the list, and I can't read it until

Is this the best place to get into contact with the snmp-ups driver developers? I am trying to get the snmp-ups driver to work with a Liebert GXT2 UPS, and it works for knowing when it goes on battery and such, but when it comes to shutting down the Liebert UPS, it doesn't work. Any suggestions or docs that I need to read? -- Ronald Reed Manager of Computer Operations ARM SGP ACRF Site

Is there a chance to use NUT with a Liebert ITON 600 UPS?

Hi, I have a Liebert POWERSURE PSP connected via USB. Cleanly built and installed from source nut-2.4.3.tar.gz using kernel 2.6.30.5 #cat /proc/bus/usb T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=10af ProdID=0003 Rev= 0.00 S: Manufacturer=Liebert S: Product=Liebert PSP 350 FW: 02 S:

About 8 months ago there was some noise on the mailing list about ESP II protocol for UPStation GXT and similar Liebert models -- someone had at least decoded part of the protocol. Has any work at all been done to facilitate using these units with NUT? I came upon, for free, a GXT 1500 and external battery pack. This unit is colossal: on-line protection and a great runtime to boot. But enough

I see there has been some Liebert work here recently. I have a Liebert UPS that has no USB, just RS-232. I reverse engineered the ESP-II protocol, at least as far as normal MultiLink monitoring goes, which was pretty simple. The protocol provides a table of parameter types and index ranges. So, I can read and (if I dare) write the parameter tables. We might be able to share info between

hello in first sorry for my poor english i've got a new ups "leibert GXT2-6000RT230" and i would like to use nut to make shutdown some server plugged on it. I bought a card with this ups "opencomms web card". I dont know where to plug the serial cable, directly on the serial port on the ups or on the serial port on the opencomms card, and with wich cable. I've got a

Hello, I (now) own an Emerson Liebert GXT3 6000VA conected via USB. I've searched the web trying to configure nut (nut-2.6.5-1.el6.x86_64 epel rpm on CentOS 6.3) to monitor the UPS, but couldn't find a successful configuration. I'm running kernel 2.6.32-279.14.1.el6.x86_64. The UPS is connected with an USB cable: Bus 004 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive

Jochen Bern wrote: > > Peter Selinger wrote: > > have you been able to get your Liebert UPS to work? If I am correct, > > it should work with the newhidups Belkin subdriver. Could you please > > post your results? I am curious to know if this works or doesn't - and > > if yes, we should add permanent support for Liebert into NUT. > > I'm sorry, but