similar to: HP R1500 G2

Hello all, I have been having a problem with upsmon on Fedora 24 on boot. NUT is configured as a netclient to a Raspbian NUT server. After boot up upsmon repeatedly says "connect failed: No such host". It is not able to connect at all until the service is bounced. This seems to indicate a name resolution problem but shouldn't this auto correct once name resolution is working properly

Hi. I'm looking for a way to configure an Eaton Powerware 5125 under Debian Squeeze (amd64) with USB port. Can someone help me? Find attached bellow my settings: # cat /etc/nut/ups.conf ... [ups01] driver = bcmxcp_usb port = /dev/bus/usb/002/003 desc = "Powerware 5125" # ls -la /dev/bus/usb/002/003 crw-rw-r-- 1 root nut 189, 130 Nov 21 11:45 /dev/bus/usb/002/003 #

Hi there, OS: Debian Squeeze Nut: 2.6.4-2.3 Installation Method: Package (apt-get install nut-server nut-client) Hardware: HP R1500 G3 INT Hardware-Specs: http://h18004.www1.hp.com/products/quickspecs/14059_div/14059_div.pdf The problem: I've installed my R1500 in our data-center and connected it to my server, a HP DL380 G7. This server has redundant power supply, on to the regular power

On Aug 7, 2013, at 7:40 AM, Jan Phillip Greimann wrote: > I tried to set up nut with our new arrived HP R1500 G3 UPS but there is a failure with the usb connection. After trying "/lib/nut/usbhid-ups -DD -a hp1500" the log says there are "libusb_get_interrupt: Connecion timed out". If you start upsd, what does "upsc hp1500" return? There are two ways to fetch

On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: > Hi there, > > OS: (L)ubuntu 12.04 precise LTS > Nut: 2.6.3-1ubuntu1.1 > Installation Method: Package (apt-get install nut) > Hardware: HP R1500 G3 INT FYI: I have a different UPS, a HP R3000 XR and I monitor it using serial and the bcmxcp driver. [R3000XR] port = /dev/ttyUSB0 driver =

On Apr 12, 2017, at 3:23 AM, me at electronico.nc wrote: > > Hello, > > Control HP R1500 G2 with nut via USB. > > Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64) > nut V2.7.1 installed from repository > > /etc/nut/ups.conf > [HPR1500] > driver=usbhid-ups > port=auto > > After dealing hours with this, hope this will help some : > > rename

On 12/04/17 09.23, me at electronico.nc wrote: > Hello, > > Control HP R1500 G2 with nut via USB. > > Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64) > nut V2.7.1 installed from repository > > /etc/nut/ups.conf > [HPR1500] > driver=usbhid-ups > port=auto > > After dealing hours with this, hope this will help some : > > rename udev rule to higher

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 - -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! Has anyone gotten it working at all with Linux :) I picked one up for thiry bucks and would love to monitor it! Liz - -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (Darwin) iD8DBQFD/5fEIACpLcG4dhwRAmeCAJ9+8FGXqKoOlZdkw/KFXb9n0PEemwCdHaoD NVnv7JjmBAjNsExK6WzAdnA= =pcPX - -----END PGP

Hi there, my HP R1500 G3 UPS doesn't apply my battery.charge.low value i set via upsrw. Is this a common problem with this model in nut 2.6.4? Any ideas how to force the UPS to accept this value? Regards Jan % upsc hp1500 battery.charge: 100 battery.charge.low: 20 battery.charge.warning: 20 battery.runtime: 23917 battery.temperature: 49.0 battery.type: PbAc battery.voltage: 39.0

On 08/08/2013, at 18.58, Alf H?gemark <alf at i100.no> wrote: > On 08/07/2013 02:02 PM, Bendtsen, Jon wrote: >> On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: >> >>> Hi there, >>> >>> OS: (L)ubuntu 12.04 precise LTS >>> Nut: 2.6.3-1ubuntu1.1 >>> Installation Method: Package (apt-get install nut)

=?ISO-8859-1?Q?Alf_H=F8gemark?= <alf at i100.no> writes: > I am working on improving the bcmxcp driver, to add more data reported > from the driver, and also add support for sending more commands to the ups. > The code changes are currently not part of any release, but they are in > github, and some more are on the way. > Would you be able to do some testing on your HP R3000

Hello, Control HP R1500 G2 with nut via USB. Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64) nut V2.7.1 installed from repository /etc/nut/ups.conf [HPR1500] driver=usbhid-ups port=auto After dealing hours with this, hope this will help some : rename udev rule to higher priority and move it to its right location, reload udev rules mv /lib/udev/rules.d/52-nut-usbups.rules

On 08/07/2013 02:02 PM, Bendtsen, Jon wrote: > On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: > >> Hi there, >> >> OS: (L)ubuntu 12.04 precise LTS >> Nut: 2.6.3-1ubuntu1.1 >> Installation Method: Package (apt-get install nut) >> Hardware: HP R1500 G3 INT > > FYI: > I have a different UPS, a HP R3000 XR and I monitor

Hi, I have a HP R1500 G2 UPS and want to get it working under Debian Lenny - as this OS is not supported by HP I'm trying to use nut for it - but I can't get it working. Do I have any chance to get the UPS running with nut. I also tried different drivers but had no luck either. Or does anyone has experience with HP UPS under debian ? Any help would be nice ! I tried /lib/nut/usbhid-ups

Hi there, OS: (L)ubuntu 12.04 precise LTS Nut: 2.6.3-1ubuntu1.1 Installation Method: Package (apt-get install nut) Hardware: HP R1500 G3 INT Hardware-Specs: http://h18004.www1.hp.com/products/quickspecs/14059_div/14059_div.pdf Problem: I tried to set up nut with our new arrived HP R1500 G3 UPS but there is a failure with the usb connection. After trying "/lib/nut/usbhid-ups -DD -a

Hello all, I am trying to set up my brother's UPS (remotely over internet) on an OpenIndiana-based storage box. According to him, the UPS is probably an Ippon Back Power Pro 600 dated around 2003 (battery recently replaced), and it has an USB connection. Sorry for a relatively long post with a log of my successes and failures, in the hopes that someone would point out what I did wrong.

On 11/9/2013 5:24 AM, Jim Klimov wrote: > Hello all, > > I am trying to set up my brother's UPS (remotely over internet) > on an OpenIndiana-based storage box. According to him, the UPS is > probably an Ippon Back Power Pro 600 dated around 2003 (battery > recently replaced), and it has an USB connection. > > Sorry for a relatively long post with a log of my successes

Ok.. While helping someone else out with a Solaris 6 issue.. I'm noticing something is broken on Solaris 7.. I've not verified it on Linux.. That is my next step. But this is what I'm seeing. I installed the latest CVS snapshot (actually from the Developer's tree but no changes have been made since 21th), compiled, and installed.. and now: ssh localhost "ps -ef" does

Hello, Yes, "pollonly" is a driver option for certain devices (and relevant to just some drivers). Disconnects are probably relevant, at least to loss of connection (and staying that way, with less agressive retries in NUT v2.7.4 and before). There is a logged issue that "pollonly" mode might have trouble detecting a disconnection/staleness, I'm not sure there's merit

On Sat, 17 Sep 2016, Yevgeniy Kuksenko wrote: > Hello all, I have been having a problem with upsmon on Fedora 24 on boot. NUT is configured as a netclient to a Raspbian NUT server. After boot up upsmon > repeatedly says "connect failed: No such host". It is not able to connect at all until the service is bounced. This seems to indicate a name resolution > problem but