similar to: SNMP on HP UPS

We use HP R5500XR UPS, and they all have SNMP cards. These devices supposedly use the IETF MIB, but in order to get the SNMP driver to talk to them I have had to hack it slightly. I'd like to see these UPS proplerly supported in the official nut release (mostly so I don't have to faff around patching and repackaging when a new version comes out) and would be more than happy to provide

I have attempted to create cpqpowermib.h for the snmp-ups driver. We use HP UPSs and version 2 of the firmware for their AF401A management cards use the CPQPOWER-MIB. I have attached my current attempt (which builds and almost works against nut 2.4.1). Once all is working I'll send in the finished article for consideration. This file is based on ietfmib.h. There are a couple of issues

Here's a patch (against 2.2.2) which adds battery.temperature to the ietf-mib snmp driver. While looking at ietfmib.h I noticed that the value for IETF_OID_IN_LINES is actually that for upsOutputNumLines.0. Does anyone know whether that's deliberate or a typo? -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/x-patch

Hi all! I'm wondering if there's anyone doing any hacking on the snmp-ups driver at the moment. I've started looking at implementing 3phase-support, and this uncovered some rather unpleasant stuff in the snmp-ups driver that I really need to fix in order to get things sane. Those of you that's allergic to SNMP might want to stop reading now, this is rather icky ;)

hi @ all, i just wonder, if it is posible to read the values for all the three phases of a mge galaxy 6000 ups? we have unfortunately one mge comet ups (one phase) to play at work, but it is important to know, how many information upsc can deliver from a galaxy. we plane to use web / snmp interface. can someone post the upsc from such ups? thanks in advance, miroslav -- SHALTEV.ORG

Hi. I'm trying to configure NUT to manage a HP R12000/3 3-phase UPS fitted with an AF401A management module but it immediately crashes with a segmentation fault. O/S is CentOS 6.3 64-bit NUT built from tarball AF401A Firmware version 2.1.3 Extract from /etc/ups/ups.conf [UPS-HP01] driver = snmp-ups port = 192.168.0.89 desc = " HP R12000/3 UPS"

----- Doorgestuurd bericht van dkbrig at gmail.com ----- Datum: Thu, 29 Jan 2009 11:16:06 -0600 Van: Danny <dkbrig at gmail.com> Onderwerp: upscode2.c Aan: adkorte-guest at alioth.debian.org Hi, I apologize if you are not the correct person, but I was wanting to submit a bug report for the upscode2.c driver but could not find a way to do that from the NUT website.

Hi! Have a similar issue with one of our customers having HP R12000/3 UPS with AF430A card. Upsmon shows the UPS as Online, on Battery and Battery discharging at the same time: [root at smrsrvslv06 lib64]# upsc hpups at localhost ambient.temperature: 19.0 ambient.temperature.high: 0.00 ambient.temperature.low: 0.00 battery.charge: 94.00 battery.current: 0.00 battery.runtime: 4620.00

Hello, I have a Legrand Keor T [1] monitored via snmp, everything seems to work fine, upsc output looks good [2] except that I can?t get the low battery state "OB LB? as usual (it works fine with others UPS like APC or Dell). Here is the configuration : [lgups] driver = snmp-ups port = 192.168.99.60 community = public snmp_version = v2c mibs = auto

Hello list, I've installed NUT on an HP blade server, and I try to get it communicating via SNMP with 2 HP R3000 UPSes, each fitted with a AF465A management card. To do this, I used the snmp-ups driver, and configured it for the "cpqpower" MIB. Communication with the UPSes is established. My problem is that both UPSes constantly return the "OL OB" status which, in

Hi, the diff inline below adds a new subdriver for snmp-ups to support Huawei UPS, based on an observed walk from a UPS5000-E with a few bits filled in from the MIBs (copy at http://junkpile.org/HUAWEI_UPS_MIB/). Sample output from upsc follows the diff. cheers, Stuart diff --git a/data/driver.list.in b/data/driver.list.in index a0e82fb..fac3d5a 100644 --- a/data/driver.list.in +++

Dear All, We have an Eaton 9395 UPS, with a ConnectUPS Web/SNMP card. I've successfully configured NUT to talk to the SNMP card, however it reports a battery.runtime.low of 1 , not much use, how do I change this value, is it defined by the UPS itself, the SNMP card, or NUT ? Output of upsc below. Cheers Stuart rcs-manage-1:~ # !upsc upsc phys-eaton ambient.temperature: 27.0

Further information on this issue, attn. Arnaud Quette: Here is the result of a test I made a few days ago. I've pulled the input plug on the UPS and watched the 3 critical OIDs through a MIB browser: - 1.3.6.1.4.1.232.165.3.4.5.0 goes from 3 (OL) to 5 (OB) (as expected => good) - 1.3.6.1.4.1.232.165.3.7.3.0 stays at 1 (OB) (=> seems meaningless) - 1.3.6.1.4.1.232.165.3.7.4.0

Bedankt voor uw bericht. Online4You is sinds 1 augustus niet meer operationeel. Per e-mail hebben wij u geinformeerd over de omstandigheden en uw opties. Helaas kunnen wij u niet meer helpen, uw mail wordt niet doorgestuurd en/of beantwoord. Indien uw abonnement is overgenomen door KovoKs, kijk dan voor contactgegevens op https://www.kovoks.nl/. Dank voor uw vertrouwen de afgelopen jaren! Met

Attached. I also attach sample output from upsc OL & OB. I only tested it with 3-phase in/3-phase out ups. Thanks, -Spiros -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100421/1d18bd30/attachment.htm> -------------- next part -------------- battery.current: 0.00 battery.runtime: 4860

On Fri, Sep 11, 2020, at 4:05 PM, Bartosz wrote: > Dear All, > > Could you please recommend me a UPS with 100% support of the ondelay parameter and NUT compatibility? > > 850 or 1000 VA > > I have the EATON 5E850iUSBDIN UPS and it does not support this parameter so I would like to buy another UPS that for sure will support it. > > Thank you, > Bart Can you tell

Hello all, I have a CyberPower Systems CP850PFCLCD that I'm hooking up to NUT 2.4.3 from apt running under Ubuntu 10.04. Using the usbhid-ups driver, things *seem* to work at first glance, but there are some odd issues. The most notable issue is that the battery.charge indicator reads 120 when at full charge. I came across this post here:

Hello everyone, I recently bought a Riello IPG 600 UPS ( http://www.riello-ups.com/products/1-ups/39-iplug) to prevent hardware damage to my server in case of power outages (already lost two hard drives because of this) and I managed to successfully configure it with NUT version 2.7.4 available for Ubuntu 17.04: nut/zesty-updates,zesty-updates,now 2.7.4-5ubuntu2.1 all [installed]

Hi, I've recently did some extensive testing with PXELinux and I must say it's great! I've tested it with several pc's and VMware vm's at home, this works flawlessly. However at my work, we only use MS Virtual PC 2007 and so on. I've started today to testimplement pxelinux into wds/ris, this seems to work but when I want to display a menu eg: default menu.c32, then

Hi. So, I applied the patch, works, but I could not figure out a fail2ban regex which will hit that line, have you got one I can use? Thanks. On Thu, 30 Aug 2018 11:03:08 -0400, sean darcy wrote: > > On 08/29/2018 09:33 PM, John Covici wrote: > > OK, Thanks. I have a couple of questions -- the line numbers do not > > match exactly, so can you tell me a couple of lines before