thr3ads.net - Nut upsdev - [Nut-upsdev] New snmp-ups subdriver for Huawei [Mar 2015]

If this information is useful, please help other people find it:
Share via:

Stuart Henderson

2015-Mar-26 01:21 UTC

[Nut-upsdev] New snmp-ups subdriver for Huawei

Hi, the diff inline below adds a new subdriver for snmp-ups to support
Huawei UPS, based on an observed walk from a UPS5000-E with a few bits
filled in from the MIBs (copy at http://junkpile.org/HUAWEI_UPS_MIB/).
Sample output from upsc follows the diff.

cheers,
Stuart


diff --git a/data/driver.list.in b/data/driver.list.in
index a0e82fb..fac3d5a 100644
--- a/data/driver.list.in
+++ b/data/driver.list.in
@@ -417,6 +417,8 @@
 "HP"	"ups"	"4"	"Various (SNMP mode)"
"HP UPS Management Module "	"snmp-ups"
 "HP"	"pdu"	"1"	"HP3488 Switch/Control
Unit"	""	"powerman-pdu (experimental)"
 
+"Huawei"	"ups"	"4"	"UPS5000-E"
""	"snmp-ups"
+
 "IBM"	"pdu"	"1"	"Blade Center Management
Module"	"15 outlets"	"powerman-pdu (experimental)"
 
 "ICS"	"pdu"	"1"	"8064 Ethernet Relay
Interface"	"16 outlets"	"powerman-pdu (experimental)"
diff --git a/docs/man/snmp-ups.txt b/docs/man/snmp-ups.txt
index 3ec3a52..eba7638 100644
--- a/docs/man/snmp-ups.txt
+++ b/docs/man/snmp-ups.txt
@@ -50,6 +50,9 @@ HP/Compaq AF401A management card, perhaps others
 *cyberpower*::
 Cyberpower RMCARD201. Should also support RMCARD100 (net version), RMCARD202
and RMCARD301
 
+*huawei*::
+Huawei UPS5000-E, perhaps others
+
 EXTRA ARGUMENTS
 ---------------
 
diff --git a/docs/snmp-subdrivers.txt b/docs/snmp-subdrivers.txt
index d717b96..9f36986 100644
--- a/docs/snmp-subdrivers.txt
+++ b/docs/snmp-subdrivers.txt
@@ -218,6 +218,7 @@ subdrivers are written.:
 - netvision-mib.c/h
 - powerware-mib.c/h
 - raritan-pdu-mib.c
+- huawei-mib.c/h
 
 To help you, above each entry in <LDRIVER>-mib.c, there is a comment that
 displays the textual OID name. For example, the following entry:
diff --git a/drivers/Makefile.am b/drivers/Makefile.am
index bf36319..d8cc127 100644
--- a/drivers/Makefile.am
+++ b/drivers/Makefile.am
@@ -199,8 +199,7 @@ mge_shut_LDADD = $(LDADD)
 # SNMP
 snmp_ups_SOURCES = snmp-ups.c apc-mib.c baytech-mib.c compaq-mib.c eaton-mib.c
\
  ietf-mib.c mge-mib.c netvision-mib.c powerware-mib.c raritan-pdu-mib.c \
- bestpower-mib.c cyberpower-mib.c delta_ups-mib.c \
- xppc-mib.c
+ bestpower-mib.c cyberpower-mib.c delta_ups-mib.c xppc-mib.c huawei-mib.c
 snmp_ups_LDADD = $(LDADD_DRIVERS) $(LIBNETSNMP_LIBS)
 
 # NEON XML/HTTP
@@ -264,7 +263,7 @@ dist_noinst_HEADERS = apc-mib.h apc-hid.h baytech-mib.h
bcmxcp.h	\
  delta_ups-mib.h nutdrv_qx.h nutdrv_qx_bestups.h nutdrv_qx_blazer-common.h
nutdrv_qx_mecer.h	\
  nutdrv_qx_megatec.h nutdrv_qx_megatec-old.h nutdrv_qx_mustek.h nutdrv_qx_q1.h
\
  nutdrv_qx_voltronic.h nutdrv_qx_voltronic-qs.h nutdrv_qx_voltronic-qs-hex.h
nutdrv_qx_zinto.h \
- xppc-mib.h
+ xppc-mib.h huawei-mib.h
 
 # Define a dummy library so that Automake builds rules for the
 # corresponding object files.  This library is not actually built,
diff --git a/drivers/huawei-mib.c b/drivers/huawei-mib.c
new file mode 100644
index 0000000..b5922a4
--- /dev/null
+++ b/drivers/huawei-mib.c
@@ -0,0 +1,234 @@
+/* huawei-mib.c - subdriver to monitor Huawei SNMP devices with NUT
+ *
+ *  Copyright (C)
+ *  2011 - 2012	Arnaud Quette <arnaud.quette at free.fr>
+ *  2015	Stuart Henderson <stu at spacehopper.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include "huawei-mib.h"
+
+#define HUAWEI_MIB_VERSION  "0.1"
+
+#define HUAWEI_SYSOID       ".1.3.6.1.4.1.8072.3.2.10"
+#define HUAWEI_UPSMIB       ".1.3.6.1.4.1.2011"
+
+/* To create a value lookup structure (as needed on the 2nd line of the example
+ * below), use the following kind of declaration, outside of the present
snmp_info_t[]:
+ * static info_lkp_t onbatt_info[] = {
+ * 	{ 1, "OB" },
+ * 	{ 2, "OL" },
+ * 	{ 0, "NULL" }
+ * };
+ */
+
+static info_lkp_t supplymethod_info[] = {
+	{ 1, "" },		/* no supply */
+	{ 2, "OL BYPASS" },
+	{ 3, "OL" },
+	{ 4, "OB" },
+	{ 5, "" },		/* combined */
+	{ 6, "OL ECO" },
+	{ 7, "OB ECO" },
+	{ 0, "NULL" }
+};
+
+static info_lkp_t battstate_info[] = {
+	{ 1, "" },		/* not connected */
+	{ 2, "" },		/* not charging or discharging */
+	{ 3, "" },		/* hibernation */
+	{ 4, "" },		/* float */
+	{ 5, "CHRG" },		/* equalized charging */
+	{ 6, "DISCHRG" },
+	{ 0, "NULL" }
+};
+
+static info_lkp_t phase_info[] = {
+	{ 1, "1" },
+	{ 2, "3" },
+	{ 0, "NULL" }
+};
+
+static info_lkp_t voltrating_info[] = {
+	{ 1, "200" },
+	{ 2, "208" },
+	{ 3, "220" },
+	{ 4, "380" },
+	{ 5, "400" },
+	{ 6, "415" },
+	{ 7, "480" },
+	{ 8, "600" },
+	{ 9, "690" },
+	{ 0, "NULL" }
+};
+
+static info_lkp_t freqrating_info[] = {
+	{ 1, "50" },
+	{ 2, "60" },
+	{ 0, "NULL" }
+};
+
+static info_lkp_t pwrrating_info[] = {
+	{ 1, "80000" },
+	{ 2, "100000" },
+	{ 3, "120000" },
+	{ 4, "160000" },
+	{ 5, "200000" },
+	{ 6, "30000" },
+	{ 7, "40000" },
+	{ 8, "60000" },
+	{ 9, "2400000" },
+	{ 10, "2500000" },
+	{ 11, "2800000" },
+	{ 12, "3000000" },
+	{ 0, "NULL" }
+};
+
+static info_lkp_t ietf_test_result_info[] = {
+	{ 1, "done and passed" },
+	{ 2, "done and warning" },
+	{ 3, "done and error" },
+	{ 4, "aborted" },
+	{ 5, "in progress" },
+	{ 6, "no test initiated" },
+	{ 0, "NULL" }
+};
+
+
+/* HUAWEI Snmp2NUT lookup table */
+static snmp_info_t huawei_mib[] = {
+
+	/* Data format:
+	 * { info_type, info_flags, info_len, OID, dfl, flags, oid2info, setvar },
+	 *
+	 *	info_type:	NUT INFO_ or CMD_ element name
+	 *	info_flags:	flags to set in addinfo
+	 *	info_len:	length of strings if STR
+	 *				cmd value if CMD, multiplier otherwise
+	 *	OID: SNMP OID or NULL
+	 *	dfl: default value
+	 *	flags: snmp-ups internal flags (FIXME: ...)
+	 *	oid2info: lookup table between OID and NUT values
+	 *	setvar: variable to set for SU_FLAG_SETINT
+	 *
+	 * Example:
+	 * { "input.voltage", 0, 0.1,
".1.3.6.1.4.1.705.1.6.2.1.2.1", "", SU_INPUT_1, NULL },
+	 * { "ups.status", ST_FLAG_STRING, SU_INFOSIZE,
".1.3.6.1.4.1.705.1.7.3.0", "", SU_FLAG_OK | SU_STATUS_BATT,
onbatt_info },
+	 *
+	 * To create a value lookup structure (as needed on the 2nd line), use the
+	 * following kind of declaration, outside of the present snmp_info_t[]:
+	 * static info_lkp_t onbatt_info[] = {
+	 * 	{ 1, "OB" },
+	 * 	{ 2, "OL" },
+	 * 	{ 0, "NULL" }
+	 * };
+	 */
+
+	/* UPS page */
+
+	{ "ups.mfr", ST_FLAG_STRING, SU_INFOSIZE, NULL, "Huawei",
SU_FLAG_ABSENT | SU_FLAG_OK, NULL },
+	{ "ups.model", ST_FLAG_STRING, SU_INFOSIZE,
".1.3.6.1.4.1.2011.6.174.1.2.100.1.2.1", "Generic SNMP UPS",
SU_FLAG_STATIC | SU_FLAG_OK, NULL },
+	{ "ups.id", ST_FLAG_STRING, SU_INFOSIZE,
".1.3.6.1.4.1.2011.6.174.1.1.1.2.0", NULL, SU_FLAG_STATIC |
SU_FLAG_OK, NULL },
+
+	{ "ups.time", 0, 1, ".1.3.6.1.4.1.2011.6.174.1.11.1.0",
NULL, SU_FLAG_OK, NULL }, /* seconds since epoch */
+
+	{ "ups.firmware", ST_FLAG_STRING, SU_INFOSIZE,
".1.3.6.1.4.1.2011.6.174.1.2.100.1.3.1", NULL, SU_FLAG_STATIC |
SU_FLAG_OK, NULL },
+	{ "ups.serial", ST_FLAG_STRING, SU_INFOSIZE,
".1.3.6.1.4.1.2011.6.174.1.2.100.1.5.1", NULL, SU_FLAG_STATIC |
SU_FLAG_OK, NULL },
+
+	{ "ups.status", 0, 1,
".1.3.6.1.4.1.2011.6.174.1.2.101.1.1.1", NULL, SU_FLAG_OK,
supplymethod_info },
+	{ "ups.status", 0, 1,
".1.3.6.1.4.1.2011.6.174.1.2.101.1.3.1", NULL, SU_STATUS_BATT |
SU_FLAG_OK, battstate_info },
+
+	{ "ups.test.result", ST_FLAG_STRING, SU_INFOSIZE,
".1.3.6.1.2.1.33.1.7.3.0", "", 0, ietf_test_result_info },
+
+
+	/* Input page */
+
+	/* hwUpsCtrlInputStandard listed in MIB but not present on tested UPS5000-E */
+	{ "input.phases", ST_FLAG_STRING, SU_INFOSIZE,
".1.3.6.1.4.1.2011.6.174.1.102.100.1.8", "3", SU_FLAG_ABSENT
| SU_FLAG_OK, phase_info },
+
+	{ "input.L1-N.voltage", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.3.100.1.1.1", NULL, SU_FLAG_OK, NULL },
+	{ "input.L2-N.voltage", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.3.100.1.2.1", NULL, SU_FLAG_OK, NULL },
+	{ "input.L3-N.voltage", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.3.100.1.3.1", NULL, SU_FLAG_OK, NULL },
+
+	{ "input.frequency", 0, 0.01,
".1.3.6.1.4.1.2011.6.174.1.3.100.1.4.1", NULL, SU_FLAG_OK, NULL },
+
+	{ "input.L1.current", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.3.100.1.5.1", NULL, SU_FLAG_OK, NULL },
+	{ "input.L2.current", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.3.100.1.6.1", NULL, SU_FLAG_OK, NULL },
+	{ "input.L3.current", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.3.100.1.7.1", NULL, SU_FLAG_OK, NULL },
+
+	{ "input.L1.powerfactor", 0, 0.01,
".1.3.6.1.4.1.2011.6.174.1.3.100.1.8.1", NULL, SU_FLAG_OK, NULL },
+	{ "input.L2.powerfactor", 0, 0.01,
".1.3.6.1.4.1.2011.6.174.1.3.100.1.9.1", NULL, SU_FLAG_OK, NULL },
+	{ "input.L3.powerfactor", 0, 0.01,
".1.3.6.1.4.1.2011.6.174.1.3.100.1.10.1", NULL, SU_FLAG_OK, NULL },
+
+	{ "input.bypass.L1-N.voltage", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.5.100.1.1.1", NULL, SU_FLAG_OK, NULL },
+	{ "input.bypass.L2-N.voltage", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.5.100.1.2.1", NULL, SU_FLAG_OK, NULL },
+	{ "input.bypass.L3-N.voltage", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.5.100.1.3.1", NULL, SU_FLAG_OK, NULL },
+
+	{ "input.bypass.frequency", 0, 0.01,
".1.3.6.1.4.1.2011.6.174.1.5.100.1.4.1", NULL, SU_FLAG_OK, NULL },
+
+
+	/* Output page */
+
+	/* hwUpsCtrlOutputStandard listed in MIB but not present on tested UPS5000-E
*/
+	{ "output.phases", ST_FLAG_STRING, SU_INFOSIZE,
".1.3.6.1.4.1.2011.6.174.1.102.100.1.9", "3", SU_FLAG_ABSENT
| SU_FLAG_OK, phase_info },
+
+	{ "output.L1-N.voltage", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.1.1", NULL, SU_FLAG_OK, NULL },
+	{ "output.L2-N.voltage", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.2.1", NULL, SU_FLAG_OK, NULL },
+	{ "output.L3-N.voltage", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.3.1", NULL, SU_FLAG_OK, NULL },
+
+	{ "output.L1.current", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.4.1", NULL, SU_FLAG_OK, NULL },
+	{ "output.L2.current", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.5.1", NULL, SU_FLAG_OK, NULL },
+	{ "output.L3.current", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.6.1", NULL, SU_FLAG_OK, NULL },
+
+	{ "output.frequency", 0, 0.01,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.7.1", NULL, SU_FLAG_OK, NULL },
+
+	{ "output.L1.realpower", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.8.1", NULL, SU_FLAG_OK, NULL },
+	{ "output.L1.realpower", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.9.1", NULL, SU_FLAG_OK, NULL },
+	{ "output.L1.realpower", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.10.1", NULL, SU_FLAG_OK, NULL },
+
+	{ "output.L1.power", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.11.1", NULL, SU_FLAG_OK, NULL },
+	{ "output.L2.power", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.12.1", NULL, SU_FLAG_OK, NULL },
+	{ "output.L3.power", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.13.1", NULL, SU_FLAG_OK, NULL },
+
+	{ "output.L1.power.percent", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.14.1", NULL, SU_FLAG_OK, NULL },
+	{ "output.L2.power.percent", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.15.1", NULL, SU_FLAG_OK, NULL },
+	{ "output.L3.power.percent", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.16.1", NULL, SU_FLAG_OK, NULL },
+
+	{ "output.voltage.nominal", ST_FLAG_STRING, SU_INFOSIZE,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.17.1", NULL, SU_FLAG_STATIC |
SU_FLAG_OK, voltrating_info },
+	{ "output.frequency.nominal", ST_FLAG_STRING, SU_INFOSIZE,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.18.1", NULL, SU_FLAG_STATIC |
SU_FLAG_OK, freqrating_info },
+	{ "output.power.nominal", ST_FLAG_STRING, SU_INFOSIZE,
".1.3.6.1.4.1.2011.6.174.1.2.100.1.6.1", NULL, SU_FLAG_STATIC |
SU_FLAG_OK, pwrrating_info },
+
+	{ "output.L1.powerfactor", 0, 0.01,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.19.1", NULL, SU_FLAG_OK, NULL },
+	{ "output.L2.powerfactor", 0, 0.01,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.20.1", NULL, SU_FLAG_OK, NULL },
+	{ "output.L2.powerfactor", 0, 0.01,
".1.3.6.1.4.1.2011.6.174.1.4.100.1.21.1", NULL, SU_FLAG_OK, NULL },
+
+
+	/* Battery page */
+
+	{ "battery.voltage", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.6.100.1.1.1", NULL, SU_FLAG_OK, NULL },
+	{ "battery.current", 0, 0.1,
".1.3.6.1.4.1.2011.6.174.1.6.100.1.2.1", NULL, SU_FLAG_OK, NULL },
+	{ "battery.charge", 0, 1,
".1.3.6.1.4.1.2011.6.174.1.6.100.1.3.1", NULL, SU_FLAG_OK, NULL },
+	{ "battery.runtime", 0, 1,
".1.3.6.1.4.1.2011.6.174.1.6.100.1.4.1", NULL, SU_FLAG_OK, NULL },
+
+
+	/* { "unmapped.hwUpsBattTest", 0, 1,
".1.3.6.1.4.1.2011.6.174.1.103.101.1.6.1", NULL, SU_FLAG_OK, NULL },
*/
+
+
+	/* end of structure. */
+	{ NULL, 0, 0, NULL, NULL, 0, NULL }
+};
+
+mib2nut_info_t	huawei = { "huawei", HUAWEI_MIB_VERSION, NULL, NULL,
huawei_mib, HUAWEI_SYSOID };
diff --git a/drivers/huawei-mib.h b/drivers/huawei-mib.h
new file mode 100644
index 0000000..326a71e
--- /dev/null
+++ b/drivers/huawei-mib.h
@@ -0,0 +1,9 @@
+#ifndef HUAWEI_MIB_H
+#define HUAWEI_MIB_H
+
+#include "main.h"
+#include "snmp-ups.h"
+
+extern mib2nut_info_t huawei;
+
+#endif /* HUAWEI_MIB_H */
diff --git a/drivers/snmp-ups.c b/drivers/snmp-ups.c
index e99615d..5b48f8a 100644
--- a/drivers/snmp-ups.c
+++ b/drivers/snmp-ups.c
@@ -48,6 +48,7 @@
 #include "bestpower-mib.h"
 #include "cyberpower-mib.h"
 #include "delta_ups-mib.h"
+#include "huawei-mib.h"
 #include "ietf-mib.h"
 #include "xppc-mib.h"
 
@@ -72,7 +73,8 @@ static mib2nut_info_t *mib2nut[] = {
 	&bestpower,
 	&cyberpower,
 	&delta_ups,
-        &xppc,
+	&xppc,
+	&huawei,
 	/*
 	 * Prepend vendor specific MIB mappings before IETF, so that
 	 * if a device supports both IETF and vendor specific MIB,
@@ -100,7 +102,7 @@ const char *mibvers;
 static void disable_transfer_oids(void);
 
 #define DRIVER_NAME	"Generic SNMP UPS driver"
-#define DRIVER_VERSION		"0.72"
+#define DRIVER_VERSION		"0.73"
 
 /* driver description structure */
 upsdrv_info_t	upsdrv_info = {


Sample output:

battery.charge: 99.00
battery.current: 0.10
battery.runtime: 13740.00
battery.voltage: 536.80
device.mfr: Huawei
device.model: UPS5000-E
device.serial: 2102310NYJ10EA000006
device.type: ups
driver.name: snmp-ups
driver.parameter.pollinterval: 2
driver.parameter.port: 192.168.44.2
driver.parameter.secLevel: authNoPriv
driver.parameter.snmp_version: v3
driver.version: 2.7.2
driver.version.data: huawei MIB 0.1
driver.version.internal: 0.73
input.bypass.frequency: 49.96
input.bypass.L1-N.voltage: 246.70
input.bypass.L2-N.voltage: 249.60
input.bypass.L3-N.voltage: 244.20
input.frequency: 49.96
input.L1-N.voltage: 247.60
input.L1.current: 7.60
input.L1.powerfactor: 0.94
input.L2-N.voltage: 249.60
input.L2.current: 7.90
input.L2.powerfactor: 0.94
input.L3-N.voltage: 244.00
input.L3.current: 8.60
input.L3.powerfactor: 0.95
input.phases: 3
output.frequency: 49.99
output.frequency.nominal: 50
output.L1-N.voltage: 238.30
output.L1.current: 13.90
output.L1.power: 3.30
output.L1.power.percent: 24.80
output.L1.powerfactor: 0.99
output.L1.realpower: 0.00
output.L2-N.voltage: 240.70
output.L2.current: 3.30
output.L2.power: 0.80
output.L2.power.percent: 5.90
output.L2.powerfactor: 0.00
output.L3-N.voltage: 241.30
output.L3.current: 0.00
output.L3.power: 0.00
output.L3.power.percent: 0.00
output.phases: 3
output.power.nominal: 40000
output.voltage.nominal: 400
ups.firmware: V100R001C10SPC600
ups.id: UPS5000-E
ups.mfr: Huawei
ups.model: UPS5000-E
ups.serial: 2102310NYJ10EA000006
ups.status: OL
ups.test.result: no test initiated
ups.time: 1427332224.00

Charles Lepple

2015-Mar-29 00:02 UTC

head link

[Nut-upsdev] New snmp-ups subdriver for Huawei

On Mar 25, 2015, at 9:21 PM, Stuart Henderson <stu at spacehopper.org>
wrote:
> Hi, the diff inline below adds a new subdriver for snmp-ups to support
> Huawei UPS, based on an observed walk from a UPS5000-E with a few bits
> filled in from the MIBs (copy at http://junkpile.org/HUAWEI_UPS_MIB/).
> Sample output from upsc follows the diff.
Hi Stuart,

Thanks for the patch. It builds cleanly for me, so I have no problems merging
it.

The only two things that jump out at me could probably be addressed with
documentation. Is there a low battery alarm? If not, we should probably mention
somewhere that people will need to either synthesize a LB status with one or
both of 'override.battery.charge.low' and
'override.battery.runtime.low'. (Or they can shut down when it first
transfers to battery, but this sounds like the sort of UPS that would keep going
for a while.)

There also seem to be a few commands in the MIB, but none are implemented here.
The only ones that people might be expecting are the shutdown.reboot and
shutdown.stayoff, although I haven't used the SNMP driver to see how well
those work in general. Not strictly necessary to implement, but we should
probably take this opportunity to point out in the snmp-ups man page that if
there are no shutdown.* commands listed in the upscmd output, there is a
potential for a race condition if the power comes back early.

Arnaud, as maintainer of snmp-ups, any thoughts here?

Thanks again,

-- 
Charles Lepple
clepple at gmail

Stuart Henderson

2015-Mar-29 12:17 UTC

head link

[Nut-upsdev] New snmp-ups subdriver for Huawei

On 2015/03/28 20:02, Charles Lepple wrote:> On Mar 25, 2015, at 9:21 PM, Stuart Henderson <stu at
spacehopper.org> wrote:
> 
> > Hi, the diff inline below adds a new subdriver for snmp-ups to support
> > Huawei UPS, based on an observed walk from a UPS5000-E with a few bits
> > filled in from the MIBs (copy at http://junkpile.org/HUAWEI_UPS_MIB/).
> > Sample output from upsc follows the diff.
> 
> Hi Stuart,
> 
> Thanks for the patch. It builds cleanly for me, so I have no problems
> merging it.
> 
> The only two things that jump out at me could probably be addressed
> with documentation. Is there a low battery alarm? If not, we should
> probably mention somewhere that people will need to either synthesize
> a LB status with one or both of 'override.battery.charge.low' and
> 'override.battery.runtime.low'.
I didn't notice anything that looks like a low battery alarm in the
Huawei MIB, though it does also return a value in UPS-MIB::upsBatteryStatus.0
so perhaps a LB alarm will be signalled there; I see that in mge-mib.c
the status appears to be generated from a combination of ietf and private
MIB but there is a comment "FIXME: the below may introduce status
redundancy,
that needs to be * adressed by the driver, as for usbhid-ups!" so I
wasn't
sure the best approach here.

Unfortunately it isn't really possible to test low battery in my
environment,
I'd need to override the generator autostart/ATS which I don't think
I'd
get approval for (my main aim with this UPS is to use NUT to act as an
abstraction layer so that it can be monitored alongside a couple of
more "normal" UPS, rather than specifically to trigger shutdowns).
>                                 (Or they can shut down when it first
> transfers to battery, but this sounds like the sort of UPS that would
> keep going for a while.)
Indeed, it is a bit larger than anything I've dealt with before, you
may have noticed the battery V in my sample output ;-)
> There also seem to be a few commands in the MIB, but none are
> implemented here. The only ones that people might be expecting are the
> shutdown.reboot and shutdown.stayoff, although I haven't used the SNMP
> driver to see how well those work in general. Not strictly necessary
> to implement, but we should probably take this opportunity to point
> out in the snmp-ups man page that if there are no shutdown.* commands
> listed in the upscmd output, there is a potential for a race condition
> if the power comes back early.
There's a hwUpsCtrlPowerOff command and a RW hwUpsCtrlPowerOffDelay
variable, but the mib isn't clear about whether this would be
"shutdown.stayoff" or "shutdown.return", I'll see if I
can find more
information about this in the manuals.

I don't see a power-on delay in the vendor mib so I think shutdown.reboot
may not be possible.

There is also a battery test command, which would be a bit easier for
me to test, I'll try and look at that sometime.
> Arnaud, as maintainer of snmp-ups, any thoughts here?
Thanks for the review Charles, and I'd be interested to hear any
comments from Arnaud.

Stuart

Seemingly Similar Threads

Search for more reasonably related threads

Nut upsdev - Mar 2015 - New snmp-ups subdriver for Huawei

[Nut-upsdev] New snmp-ups subdriver for Huawei

[Nut-upsdev] New snmp-ups subdriver for Huawei

[Nut-upsdev] New snmp-ups subdriver for Huawei

Seemingly Similar Threads