similar to: Megatec_USB on OpenBSD 4.3 - no input interrupt endpoint

Hello again! Thanks to the precious help from Henning Brauer, I managed to solve an issue with my UPS (a rebranded UPS speaking in Ablerex-ese over USB). Under OpenBSD 4.3, the UPS was claimed by HID. Now that I recompiled the kernel, adding a USB_quirk, this is what I get when I insert the USB cable: ugen0 at uhub0 port 2 "UIS_ABLER USB to Serial" rev 1.00/1.00 addr 2 So far, so

> > hmm, apparently the UPS doesn't close the replies to our queries with > the expected CR and we (I) did not consider that case in nutdrv_qx -- > noted: > https://github.com/networkupstools/nut/issues/441 > > But blazer_usb, being less strict on the terminating CR of Q1 replies, > should work with your device. > > > root at artu:~# upsc Elit at artu > >

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the

Use the name from ups.conf in front of "@localhost". ?The re?sult is quite different ;) root at artu:~# upsc Elit at artu Init SSL without certificate database Error: Driver not connected > What if you try nutdrv_qx without specifying megatec? (It should > autodetect.) > ?Here is the result: ? root at artu:~# upsdrvctl start Network UPS Tools - UPS driver controller

Hi Alexander, thanks for your good work on the megatec_usb driver. I have made a few more (cosmetic) changes. Is the driver now working stably for your device? In particular, do the instant commands (and particularly "upsdrvctl -k") work properly? In this case, we could hopefully mark the device as "supported" and merge the driver to the main branch. There is still the

Like Glen Ogilvie, I got a newer Dynamix 650 VA with USB connection, and was having trouble getting NUT to communicate with it. This appears to be the UPS that megatec_usb was built for - Vendor: 0x0001, Product: 0x0000, uses Megatec's software, has USB chip attached to internal serial lines, and has terrible USB implementation with fake HID tables. But megatec_usb would consistently fail.

Hi, I have a weirdness with tftpd-hpa, it seems to report a wrong date in the syslog (2 hours early): root at sup01 > tail -f /var/log/syslog Oct 16 11:26:52 sup01 last message repeated 11 times Oct 16 11:28:06 sup01 ucd-snmp[425]: Connection from 62.210.191.157 Oct 16 09:28:33 sup01 in.tftpd[14495]: RRQ from 10.8.1.222 filename update.cfg Oct 16 11:30:01 sup01 /USR/SBIN/CRON[14521]: (root)

Hey all, thanks for your work on nut. I recently got myself a new cheap UPS, and have thus far determined very little about it. I can run whatever you like to help identify and work with it. So far I've played around with various settings and have had some limited success with the megatec_usb driver (Debian testing version): ----ups.conf---- [plexus] driver=megatec_usb model=500VA mfr=Plexus

Atlantis Land A03-P551(V1.2) battery.charge: 100 battery.voltage: 13.70 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.mfr: device.model: device.type: ups driver.name: blazer_usb driver.parameter.langid_fix: 0x0409 driver.parameter.pollinterval: 2 driver.parameter.port: x driver.version: 2.6.4 driver.version.internal: 0.08 input.current.nominal: 0.0

Merry Christmas to you all and best wishes! I ran into exactly the same problem as described. OS: FreeBSD 9.0-Rel UPS: Eaton E-Series NV 600H NUT: from Ports, nut-2.6.5_1 driver: blazer_usb I am sure the problem is not permission-related as it occurs even when the driver runs as root. My tested recipe for USB permissions is: 1. run usbconfig to find where the device is connected. In my case:

I've having trouble understanding the NUT compatibility page. Is it compatible with the OMNISMART300? Or the OMNI900LCD? The compatibility page said for instance SMART550 -- tripplite_usb SmartUPS -- tripplite OMNI650LCD -- usbhid_ups so I'm not sure if an OMNISMART300 is like a Smart, or a SMART, or an OMNI, or even if it's supported at all. Thanks in advance for any help!

I've just written an NUT driver to manage a Masterguard UPS connected via USB, and some questions arose. Why I wrote a new driver? The servers in question only have two serial ports, so I want to use USB. I first wrote the low-level USB routines expecting to integrate them into the existing masterguard driver. However, that driver was so rudimentary I wrote my own one. It can be

2008/4/10, David Erosa <david.erosa at gmail.com>: > Public bug reported: > > Binary package hint: nut > > After updating to last nut package (2.2.1-2.1ubuntu6), the megatec_usb > driver seems to be working, except for the charge percentage: > > $ /lib/nut/megatec_usb -DDDDD -a SAI > ... > Checking device (0665/5161) (001/007) > - VendorID: 0665 >

Hoi all, First of all thanks for all the great work on NUT. I have two identical Socomec UPS Netys 1000PE. One is connected to an Ubuntu Hardy 64bit system and is detected just fine by the driver (v1.5.9), see below. The other one is connected to a Debian Etch 32bit system and is not detected by the driver (v1.5.9), see below. Would you have any idea how I could further debug this issue? Could

Hi Jayson, I forward your request to the right place. Carlos (or some other) will have an answer, or at least some questions for you. -- Arnaud 2008/6/27 Jayson Anderson <jayson.anderson at gmail.com>: > Greetings Arnaud, > > I wrote you some time ago about whether NUT would support the Belkin > F6H550-UPS device in the future. > > You had replied and mentioned to send

Hello everyone, has anyone ever tried to make this device work with Linux and NUT? This is what udevadm monitor says: UEVENT[1215983089.652345] add /devices/pci0000:00/0000:00:0f.2/usb1/1-1 (usb) UEVENT[1215983089.652427] add /class/usb_endpoint/usbdev1.4_ep00 (usb_endpoint) UEVENT[1215983089.657975] add /devices/pci0000:00/0000:00:0f.2/usb1/1-1/1-1:1.0 (usb) UDEV

Dear all- I have a dataset (see a sample below - but the whole dataset is June 2005 - June 2008). The "LST" format is "YYMMDDHHmm" and I would like to get the hourly average of the "mph" for the summer months (spanning all years). I have been trying to use "aggregate" but am not having much success at all! any thoughts would be greatly appreciated.

Hi all! Maybe possible adds something in megatec_usb driver for normal working with ippon 2000? This is output for drivers megatec_usb and blazer_usb: =========================================================== gate# /usr/local/libexec/nut/megatec_usb -DDDD -a IPPON Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 debug level is '4' Checking

Hi, Has anyone had success with the Dynamix 650VA, that uses the USB cable? I can't get megatec_usb to recognize it, I have tried both stable and development versions. Regards Glen Ogilvie