Hoi all,
First of all thanks for all the great work on NUT.
I have two identical Socomec UPS Netys 1000PE. One is connected to an
Ubuntu Hardy 64bit system and is detected just fine by the driver
(v1.5.9), see below. The other one is connected to a Debian Etch 32bit
system and is not detected by the driver (v1.5.9), see below.
Would you have any idea how I could further debug this issue? Could it
be the difference between USB1.x and USB2.0?
Any help is much appreciated.
Jan
[Ubuntu Hardy 64bit]
Checking device (0665/5161) (003/004)
- VendorID: 0665
- ProductID: 5161
- Manufacturer: Cypress Semiconductor
- Product: USB to Serial
- Serial Number: unknown
- Bus: 003
Trying to match device
Device matches
Starting UPS detection process...
Asking for UPS status [Q1]...
Q1 => OK [(233.4 233.9 233.3 024 50.0 27.7 25.0 00001001]
Asking for UPS status [Q1]...
Q1 => OK [(233.4 233.4 232.5 024 50.0 27.7 25.0 00001001]
Asking for UPS status [Q1]...
Q1 => OK [(232.5 232.5 233.3 024 49.8 27.7 25.0 00001001]
Asking for UPS status [Q1]...
Q1 => OK [(233.9 233.9 232.9 024 49.8 27.8 25.0 00001001]
Asking for UPS status [Q1]...
Q1 => OK [(234.4 233.9 233.3 024 49.8 27.8 25.0 00001001]
0 out of 5 detection attempts failed (minimum failures: 2).
Asking for UPS information [I]...
I => FAILED [short read]
Megatec protocol UPS detected.
Cancelling any pending shutdown or battery test.
Asking for UPS power ratings [F]...
F => OK [#230.0 004 24.00 50.0]
24.0V battery, interval [19.4V, 27.4V].
Done setting up the UPS.
Asking for UPS status [Q1]...
Q1 => OK [(234.4 233.9 233.3 024 49.8 27.8 25.0 00001001]
Calculated battery charge: 100.0%
dstate_init: sock /var/run/nut/megatec_usb-net1000 open on fd 5
Asking for UPS status [Q1]...
Q1 => OK [(233.4 233.4 233.3 024 49.8 27.8 25.0 00001001]
Calculated battery charge: 100.0%
[Debian Etch 32bit]
Checking device (0665/5161) (001/004)
- VendorID: 0665
- ProductID: 5161
- Manufacturer: Cypress Semiconductor
- Product: USB to Serial
- Serial Number: unknown
- Bus: 001
Trying to match device
Device matches
Starting UPS detection process...
Asking for UPS status [Q1]...
Q1 => FAILED [timeout]
--
----
"It is an illusion to think that we are free to apply our increasing
knowledge in any way we choose. In reality we are struggling to deal
with the consequences of it." -- John Gray
----
