similar to: CyberPower 685AVR and newhidups

I've been using nut with a serial device for a while, but today I tried hooking up this new CyberPower 685 unit via newhidups--since it seemed better supported over USB than serial, based on reading the list archives and cvs logs. Unfortunately, I can't connect to it. My system sees the device: uhid1: CPS UPS BF700, rev 1.10/0.01, addr 2, iclass 3/0 ... and I have chmodded all

i can't seem to get newhidups to detect my UPS.. i'm using nut-2.0.3 (tried both the rpm from fc5-updates and compiling my own) here is the entry for the UPS in /proc/bus/usb/devices T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0764 ProdID=0501 Rev= 0.01 S: Manufacturer=CPS S: Product=UPS

2006/1/13, Paul Mogren <fkamogee@yahoo.com>: > > This thread is FYI. I don't need any help here. > no, but some details for those who will read it, maybe ;-) I have SUSE 10.0 and an MGE Ellipse. I installed the NUT package from MGE. > > 1) The generated ups.conf pointed to a bad location: > /dev//dev/input/event0 > who generated that ? it seems like an old hiddev

2005/9/25, Peter Selinger <selinger@mathstat.dal.ca>: > > Arnaud Quette wrote: > > > > Some more points while you're at it: > > - newhidups will have to be renamed. My aimed was to let the name until > we > > can superceed hidups. Then remove hidups, and rename newhidups to > usbhid-ups > > (name proposition welcomed, but should match the fact

I just installed NUT and my UPS is an APC Back-UPS ES 500. I looked in the list of drivers and found APC Back-UPS ES 350 listed in "drivers.txt" -- that list said I should use either the newhidups or hidups driver. I looked in the installation and I found headers and c files to create these drivers (I think), but in /usr/local/ups/bin there is no driver named, "newhidups or

I have gone ahead and merged the regex_branch with the main Development branch. Reason: recent renaming of files and moving around of code leads to conflicts between the branches that will be increasingly difficult to resolve. It is easier to merge now while the two branches are still relatively similar and most edits non-overlapping. The merge is between tags before_PSE_6 and after_PSE_6 on

Peter, I just saw Scott Alfter's report. I just wanted to say that this is such a nice addition, I like it very much, it makes finding what is needed so much easier! One suggestion if I may, a timestamp of some kind with each =>Got line might be helpful for determining the notification frequencies. Thanks for the new option, AG --

I'm using an APC Back-UPS XS with nut 2.0.3. I've recompiled/reinstalled the source, and switched over to the newhidups driver (instead of the old hidups driver). I modified by ups.conf to use newhidups. The hotplug files were not automatically installed, I had to copy those from the scripts directory to my hotplug/usb directory. The newhidups driver loads find and then works for a

Peter, if you're back, I was wondering if you might have a chance to look into the issues I reported last month. I'm back to using hidups right now, but I would prefer to use a current, maintained driver. Thanks!

Does anyone on this list have a CyberFort 350? It's a European model, and should be equivalent to the US BackUPS ES 350 model. What I'm seeing is upsd reporting stale data. While the battery is running down, upsc doesn't see the battery % changing, so I'm assuming the driver isn't collecting data at that point. Unfortunately, the system/UPS is not here (I'm in the

Hi there, I'm trying to track down a problem with said combination. Broadcast message from nut (Thu Jan 26 13:22:06 2006): Communications with UPS UPS@localhost lost Broadcast message from nut (Thu Jan 26 13:22:11 2006): UPS UPS@localhost is unavailable "newhidups -DDD hiddev0" seems happy enough, as does "upsd -DDD -f" - at least until I start upsmon. Then I

Hi, Can't get newhidups (2.0.5) or usbhid-ups (SVN trunk) to work 2.0.5 hidups seems to work, but I was hoping for more information... like temperature, etc. Tried newhidups and usbhid-ups, but they don't seem to detect my UPS... should I switch back to serial? Will I get more information? (trying not to move back to apcupsd, since i have a mixed environment) Here is some debug

I Seem to have made some progress in getting nut-2.0.5 installed, but hidups still has a version number of 0.13. First is hidups 0.13 the correct version? if not how do I find the correct version. Second if my Geek Squad GS1285U UPS is not supported how do I proceed. I have been a programmer for 35 years(mostly high level computer aided design), written code in 20 some languages, am retired

I'm trying to get nut to work with a Cyberpower 900AVR. There are many different products known by this name, but this one has the extra name 'BC900D'. I am told by a cyberpower tech that this one should talk exactly the same USB protocol as the 685AVR, which was recently made to work with newhidups. Unfortunately, when I run the SVN checkout (trunk) of nut-2.1, I get: sstreet

Well, after our first real extended power outage, I found out that even though the UPS 1000 RM is recognized okay, it does not work properly. It never seems to see any change in UPS status. It looks very similar to the other issue I reported with the APC CyberFort 350. I never was able to get to the bottom of the CyberFort issue, but I'll bet it's the same issue as we have with the

Hello everybody, After succeeded in "tuning" nut-2.0.0's hidups and 2.0.3's newhidups on customized Linux kernels, we are now facing a new challenge : trying to install nut-2.0.5 on a RedHat ES4 which is based on a 2.6.9 kernel. I picked up the 2.0.5 source package and follow the INSTALL doc until step 6. So far so good. RH ES4 is managed by udev, therefore I presume we

This took a long time because I had problems with my system. After I reloaded my operating system several times I found I had a bad memory module. Here is the output from newhidups for my Geek Squad GS1285U. It just kept repeating until I hit ctl-z. I think that this means nut will work for this ups. My computer is not powered by the ups yet. I did not want it to be powered down by accident.

Hello everyone! If this message was posted twice, my apologies. I'm having issues with my webmail today... I am using the testing version of NUT from SVN at changeset 582. I have successfully created a stub for newhidups driver for my Dynex DX-800U UPS, but I am completely lost on the customization of it. I've followed the hid-subdrivers.txt instructions and I understand I need to

There is a memory leak in newhidups. After 23 days uptime it used 138M memory. Apart from the memory leak, the system works ok. Is there anything I can do to help fix this problem? Tor. [root@tophat init.d]# ps -unut v PID TTY STAT TIME MAJFL TRS DRS RSS %MEM COMMAND 21122 ? Ss 1:35 0 69 137934 136800 27.0 /sbin/newhidups auto 21125 ? Ss 0:37 0

Hi, I'm running nut 2.0.3 on Gentoo connected to an MGE ProtectionCenter 675. newhidups intermittently crashes. Any ideas? N. # /usr/lib/nut/newhidups -a mgeups Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3) Detected a UPS: MGE UPS SYSTEMS/PROTECTIONCENTER Using subdriver: MGE HID 0.8 This is the error I'm getting *** glibc detected *** /usr/lib/nut/newhidups: double free or