similar to: Driver for AEG UPS

hi, i own a aeg protect home (think it is a 600 VA) which has a serial and an usb port. using this hack in ups.conf: [bestupsname] driver = bestups port = /dev/ttyUSB0 ID = FOR,750,230,230,11.0,13.5 desc = "home-server" i start the driver with: ./bestups -a bestupsname -D -q and after adding some debugging it seems to work (not yet in

Yes both UPS units are on different power supplies. MINSUPPLIES is set to 1. Afaik NUT waits for OB and LB before shutting down the system. Is there a way to change this behavior to only wait for OB? Then I would use FINALDELAY in case the power outage doesn't last long. I already tried to change the battery.runtime.low setting over the webinterface of the CS121 (snmp is readonly) but with

Hello, I need CAP_FOWNER=ep for the asterisk process, i set it with setcap on the file /usr/sbin/asterisk, it's there when i look on it with getcap, but after starting and loocking with getpcaps there's only cap_net_admin+ep set. So how exactly do I set CAP_FOWNER? Do I have to patch and recompile or is there another solution I did not see yet? thanks, best -- Raimund Sacherer

Dear ladies and gentlemen, we are developer and producer of UPS devices. Now we would like to integrate a small UPS via USB connection to NAS systems. We heart from third party that we need a special driver for NAS systems to work fine and to display also the company name and UPS device name in the web page / software of NAS. Currently we have a UPS with USB and our own VID (0x2B2D) and PID

Resend the mail. ???: Zhan, Cindy (???) ????: 2015?8?28? 16:19 ???: nut-upsdev at lists.alioth.debian.org<mailto:nut-upsdev at lists.alioth.debian.org> ??: Xie, Maggie(???) ??: Request for ew device<0x2B2D/0xFFFF> listed into NUT Dear NUT Developers: We really appreciate for your great job and accomplishment in NUT. It?s interesting and fabulous. It would be great if

2015-06-08 13:09 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > On Mon, 2015-06-08 at 10:13 +0200, Arnaud Quette wrote: > > -ATTRS{idVendor}=="06da", ENV{UPOWER_VENDOR}="Liebert" > > > > +ATTRS{idVendor}=="06da", ENV{UPOWER_VENDOR}="Phoenixtec Power Co., Ltd" > > I'm guessing this would require changes in NUT, so I

Hi all, I have problem with UPS from PowerWalker model VFI 2000 RT LCD over USB (didn't try serial yet). UPS should work via HID driver but ups.status is not rendered properly. Specification of UPS says USB HID compatible. HID driver is the only one which talks with UPS as i try a few from /lib/nut. I use driver usbhid-ups (which communicate with ups), but subdriver resolving is

Hi All, new to the list. Wondering if anyone has / knows of, a good rate importer tool that can be used to standardize and normalize the ratesheets / rate decks etc. obtained from various carriers so they can be analysed and imported into a DB or be saved as a CSV or something? Thanks so much in advance aeg -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello all, I am trying to set up my brother's UPS (remotely over internet) on an OpenIndiana-based storage box. According to him, the UPS is probably an Ippon Back Power Pro 600 dated around 2003 (battery recently replaced), and it has an USB connection. Sorry for a relatively long post with a log of my successes and failures, in the hopes that someone would point out what I did wrong.

Following the instructions a following site I can not get nut to work with my UPS. http://bernaerts.dyndns.org/linux/75-debian/335-debian-wheezy-install-monitor-eaton-ups Hope that you can find out what is wrong by the provided info in the email Best Regards, Magnus Karlsson # lsusb -s 001:005 -v Bus 001 Device 005: ID 06da:0002 Phoenixtec Power Co., Ltd UPS Device Descriptor: bLength

On 11/9/2013 5:24 AM, Jim Klimov wrote: > Hello all, > > I am trying to set up my brother's UPS (remotely over internet) > on an OpenIndiana-based storage box. According to him, the UPS is > probably an Ippon Back Power Pro 600 dated around 2003 (battery > recently replaced), and it has an USB connection. > > Sorry for a relatively long post with a log of my successes

Dear list I am running some simulations in R involving reading in several hundred datasets, performing some statistics and outputting those statistics to file. I have noticed that it seems that the time it takes to process of a dataset (or, say, a set of 100 datasets) seems to take longer as the simulation progresses. Has anyone else noticed this? I am curious to know if this has to do with how R

While we do sync our /etc/passwd whenever /etc/smbpasswd is changed via the Samba sync option that does not seem to be possible the other way round: I just want a /etc/smbpasswd generated from my /etc/passwd with the correct passwords as used for the UniX login... Is that possible ? Regards, -- /(__ __|\ Lars Steinke, Research Student @ ( \/ __)_

Hello! I just noticed a behavior of samba I am wundering about: I have a Samba-Server with a [homes] section. As user "barth" I conect to this using \\<Samba-Server>\<any username> permission is checked for "barth" with his password and access is granted with the rights of barth to the HOME-directory of <any username>. So far so good. This also works

Salut Bastien 2015-06-04 13:04 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > On Sat, 2015-05-30 at 18:51 +0200, Arnaud Quette wrote: > > > > > > 2015-05-29 14:09 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > > > On Fri, 2015-05-29 at 13:59 +0200, Arnaud Quette wrote: > > > > Hi Richard and the list, > > > > > >

Hello! I know that this is not samba related, but may be some one knows a quick answer: When using profiles, stored on a well running samba-2.0.0beta2 PDC, the NT PC's cache the profile during a user session. As this profile is not deleted on the PC and we have a lot of users with only few PC's we need a lot of diskspace for this old profiles. Is there a way (Registry Key, ..) that

Hi, I'm officialy announcing the new 1.1.23 stable release of Samba Console, along with a stable IMC release too (1.2.24). This code is just going in production at a new customer site this week. From the project web site : Samba Console <http://imc.sourceforge.net/samba/index.html> is the first console developped for IMC. It offers a simple and ergonomic interface for managing a

Dear all I am trying to use the cov function in the stats library. I have no problem using this function from the console. However, in my R script I received a "function not found" message. Then I called stats::cov(...) and received an error message that the function was not exported. Then I tried stats:::cov (three colons) and received the error Error in get(name, envir =

Hi, I need to shut down a VMWare host if both connected UPS are x minutes on battery. Both UPS are connected via SNMP. Because there are multiple vm running on that host, shutting every vm down takes some time. So most likely, waiting for low battery, the time left won't be enough. I tried overwriting the settings for low battery but that didn't work. Are timers the only possible

Hi! all. I have been reading every mail and news about nut and 06da:0002 Phoenixtec but not found a solution. I have a very nice working ups from: CENER ref: "Active 1000VA 230V 12 CENER" and front logo "LA 900" It has COM3 and USB plugs, I don't know if it needs a standar RS232 I have test with varius drivers in ups.conf [MyUPS] driver = bcmxcp_usb | usbhid-ups |