similar to: (no subject)

I am have a nice result whith blazer_ser driver! respect! # ./nut start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.4.1) Supported UPS detected with megatec protocol Vendor information read in 1 tries Battery runtime will not be calculated (runtimecal not set) <================= !!! Starting nut. Network UPS Tools upsd 2.4.1

Attached is a patch to hopefully improve the wording of some of the man pages. I will commit this in the next few days, but I wanted to give the driver authors a chance to comment. One thing that I feel is important is cross-referencing between the man pages. On the off-chance that someone does RTFM, it would be good if we make sure that a user doesn't have to read too far in order to find

Hi All! I have a traoble whith my ups, - megatec driver can not calculating % of charging and voltage on battery: # uname -a FreeBSD backup.*.*.* 8.1-RELEASE FreeBSD 8.1-RELEASE #0: Wed Sep 22 12:25:01 EEST 2010 ups.conf [Powercom] driver = megatec port = /dev/cuau0 #battvolts=12:24 desc = "powercom sxl-1000A" # ./nut start Network UPS Tools - UPS driver controller 2.4.1

There simply is no such functionality, or the driver can not read these values because of nesovmestimoti / oschibki? Maybe a fix? And whether further use of the NUT, so that my UPS shut off my server connected to it?

The REDi Blazer 600VA (BLAZER600c) UPS found here [ro_RO]: http://www.emag.ro/ups-redi-blazer-600va-blazer600c/pd/EX5X2BBBM/ which is actually a Centralion Blazer 600VA [en_TW]: http://www.centralion.com/html/product/back-Product-ups-blazer400.htm works with the blazer_ser driver ----------shell output---------- # upsrw ups # upscmd -l ups Instant commands supported on UPS [ups]: beeper.toggle -

Hi Marcello, Marcello wrote: > a few days ago I bought a "Tecnoware Easy Power 1200" UPS for my little Linux > server, and in these days I haven't found nothing on the net apart the > "driver" for Linux (written in Java) on Tecnoware site (www.tecnoware.com<http://www.tecnoware.com> ). > So i tried NUT: while trying one by one all the possible supported

Hi, I've being using nut 2.2.2 (Debian Lenny) via megatec_usb driver for IPPON Back UPS 600. Then I upgraded to nut 2.4.3 (Debian Squeeze) with broken megatec_usb. I moved to blazer_usb, it connected IPPON. [myups] driver = blazer_usb port = /dev/usb/hiddev0 desc = "Local UPS" #from megatec.c: batteries[] = {{ 12.0, 9.0, 16.0, 9.7, 13.7, 0.0 },

Hi Michael, thanks for your feedback! I'm cc'ing the NUT users list for info. I've also added an entry for your device (Powerwalker Line Interactive VI 1400, using blazer_usb). Can you please send back an upsc output, and at least check for the shutdown behavior, if not already done: http://new.networkupstools.org/user-manual.html#Testing_shutdowns 2010/10/19 MichaelE <662435 at

Hello, just joined to the list, because i have a problem. :S We have 2 exact same configuration: basic Fujitsu server + Eaton NV1000H ups. OS is Debian Squeeze. According to the driver list, the ups uses the blazer_usb driver. I never tried nut before, so i read some of the docs, and configured it manually. The problem pops up when i try to simulate the power-outage. I just unplug the ups'

2010/3/14 IT Department ULQS <it at quality.ua>: > > I try send this email to 'carlos.efr at mail.telepac.pt' but: > Fri 2010-03-12 19:26:13: <-- 550-The account has been suspended > Fri 2010-03-12 19:26:13: <-- 550 A conta do destinatario encontra-se > suspensa (#5.1.1) right, Carlos is retired from the NUT team. moreover the megatec and megatec_usb driver are

I would also be very interested in this topic. Best Regards, Bart pon., 17 sie 2020, 12:55 użytkownik Marc Franquesa <marc.franquesa at gmail.com> napisał: > Sorry, because this is not a technical question rather than a Hardware > advice/recommendation. > > I have been using NUT-UPS perfectly for more than 7 years using two > different Eaton/MGE models. > > After a

On Apr 3, 2015, at 1:54 PM, Humberto M?ckel <hamberthm at gmail.com> wrote: > I've successfully configured UPSMON to monitor the UPS status, and do the shutdown procedure by calling the SHUTDOWNCMD on a simple bat file I've made. This bat file is as follows: > > cd C:\Program Files (x86)\NUT\bin > blazer_usb -a HAMUPS -k > pause > > So this should send the

Thanks all for the quick responses on the question (always a good sign of this mailing list). (Tim Dawson, Manuel Wolfshant): Regarding root cause of my current problem pointing to a faulty battery, this is not the first time that someone points to it. However I made a simple test with the vendor tools (Windows) and didn't found any issue, as well as they discharged normally (although only

My experience on situations like this is that it is almost always a bad battery.  Once load is removed, the voltage bounced back, and thus you show time/capacity, but it's possible that the sag under load drops you into LB, and causes the shutdown. If the UPS has a battery test, give it a try, or load test the battery external to the UPS if you can - I suspect that the UPS will be fine,

On Jun 2, 2014, at 12:25 PM, Andreas Lausch / TBT wrote: > > Hi, > > thanks for the reply. > > On 2014-05-29 05:21, Charles Lepple wrote: >>> Now my questions: >>> 1. should the blazer_ser's high voltage be the voltage during charging >>> or right after I've unplugged it from the mains? >> sounds like during charging (or more

Hello, > What do you get from the "I" command? A string of 8 spaces. >> So I believe the compatibility list deserves two new lines. > >Probably best to delay adding this to the HCL until we can get the driver to shut down the UPS properly. I debugged the problem. From the source, drivers/blazer.c:418 /* * If a command is invalid, it

Hi, They say one should never argue with people that know more than you, so please bear with me. On 2013/10/24 09:47 PM, hyouko at gmail.com wrote: > The driver is expecting either 'ACK' or no reply at all in case of > success and the command itself echoed back in case of errors. > On the other hand, your UPS replies '(ACK' in case of success and > '(NAK' on

Hello, after some time monitoring my installation to see how its working, I found that some ramdom times, like one or two days in a week, the driver fails to start and upsmon keeps registering a "data stale" error on Windows' event log. I've set the NUT service to "delayed start" to see if it was a driver conflict on the system start rush, but it keeps doing it

Hi, thanks for the reply. On 2014-05-29 05:21, Charles Lepple wrote: >> Now my questions: >> 1. should the blazer_ser's high voltage be the voltage during charging >> or right after I've unplugged it from the mains? > sounds like during charging (or more accurately, during float charging at the end of the cycle): > >

Hi, Sorry for my poor english but it isn?t my native language. I?m testing an infosec E4 with nut-2.6.4-2.3 on Proxmox ve 3.0 (based on debian wheezy). The drivers that match this ups, is blazer_usb. Btw, I have try nut-2.6.5 with unstable repository from wheezy, but it still doesn?t fully work. I can shutdown my computer when battery is low, but unfortunately I can?t shutdown ups. Like said on