similar to: Tripp Lite Smart Pro SMX1500SLT / SMARTINT1500 - not identified via serial port

I have several Tripplite SU2200RMXL2U and SU3000RM2U units that I would like to monitor using Nut. I have tried to attach to the units using a serial cable with the tripplite and tripplitesu drivers with no success. The drivers simply seem to not recognize the UPS. I then tried using the tripplite_usb driver with the usb cable. It definitely sees the UPS but I am getting errors which told me

On Mar 25, 2020, at 6:09 PM, Lee Damon <nomad at ee.washington.edu> wrote: > > I have no experience with Tripp Lite UPSs and the reviews I've found online are scant and fairly mixed so I thought I'd ask here... It's always hard to get a good read on whether a particular UPS brand is problematic, or if there is more noise on the lists because people are trying to make

I am not sure if this is a polling/communication problem or not. Running NUT 2.7.4 Driver used usbhid-ups Driver version 2.7.4 Driver version internal 0.41 This is the information the driver is able to pull UPS status OL UPS model TRIPP LITE UPS Manufacturer Tripp Lite Vendor ID 09ae Product ID 3016 OS is FreeBSD/XigmaNAS v11.2 The issue is that for every 30sec that the driver is able to

I'm obviously biased but I like Tripp Lite stuff. I try to pitch in and help with Network UPS Tools issues related to Tripp Lite when I can too (albeit the developers and users on this list are usually more helpful than me). Just to confirm, it sounds like you are looking at the SU5000RT4UHV, correct?

On Aug 15, 2015, at 3:15 AM, Marco Walther <marco at sonic.net> wrote: > Hi, > > I just decided to fix some scaling issues for my UPS (TRIPP-LITE SMART1500LCDT). Apparently that issue existed for some time (and I knew about it as well:-() > > See http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 for a thread. > > My little patch is attached (against 2.7.3).

On 3/25/20 3:31 PM, David Zomaya wrote: > Just to confirm, it sounds like you are looking at the SU5000RT4UHV, > correct? > > https://www.tripplite.com/smartonline-208-240v-5kva-4.5kw-double-conversion-ups-4u-rack-tower-extended-run-snmpwebcard-option-usb-db9-serial~SU5000RT4UHV > That does seem to be the one they are quoting, yes. thanks, nomad

On 3/25/20 3:50 PM, David Zomaya wrote: > Thanks. I haven't used that unit specifically with Network UPS Tools, > but have used similar (from a protocol perspective) units. > > I'm working remotely for a while, but on the off chance I get into the > position to connect a unit via USB, what Operating System are you using? > > If the opportunity arises, I can try to

Thanks. I haven't used that unit specifically with Network UPS Tools, but have used similar (from a protocol perspective) units. I'm working remotely for a while, but on the off chance I get into the position to connect a unit via USB, what Operating System are you using? If the opportunity arises, I can try to set up a basic test. Thank you, David Zomaya Business/Quality Analyst-

Re: "Does it work well with NUT?" Assuming it is the SU5000RT4UHV, the similar units I've tried seemed to work fine. For reference, the SU5000RT4UHV should be a 4004 USB protocol. ________________________________ From: David Zomaya Sent: Wednesday, March 25, 2020 5:21 PM To: Lee Damon; nut-upsuser Mailing List Subject: Re: [EXTERNAL] [Nut-upsuser] thoughts on tripp lite Smart

We're looking at replacing some old APC SmartUPS 5000s with something that has USB so NUT can more easily talk with it (and yes, I've tried USB-RS232 adapters and every one I tried started kicking out errors within a few hours). One of the bids we have is for a "Tripp Lite UPS Smart Online 5000VA 4500W Rackmount 5kVA 200V/240V" as the potential replacement unit. I have no

I have gone through Two Tripp-Lite AVRX550U units trying to troubleshoot issues. There are two separate (but possibly related issues that I am finding. I’ve created an issue on the Github page, but it’s not clear that anyone looks at those issues (https://github.com/networkupstools/nut/issues/799) 1. According to Tripp-lite, the AVRX550U uses the 2012 protocol, but it’s listed in NUT as

Well, I have good news and bad news. I have a Tripp Lite SmartPro UPS attached to a Linux server running Ubuntu 5.10, and I'm running the just-released nut 2.0.3. I had error -71 from the UPS, which Charles Lepple correctly called out as a likely cable problem (thank you, Charles.) The cable provided with the UPS by Tripp Lite was just plain bad. Not too long, mind you- defective. I

Greetings, I have a Tripp-Lite SU6000RT4U unit connected via USB and RS-232. # tripplitesu -DD -u root -a tl6000 Unable to detect Tripp Lite SmartOnline UPS on port /dev/ttyS0 # tripplite -DD -u root -a tl6000 Failed to find UPS - giving up... # newhidups -DD -u root -a tl6000 Checking device (09AE/4002) (001/003) - VendorID: 09ae - ProductID: 4002 - Manufacturer: Tripp Lite - Product: TRIPP

I've having no success trying to use the tripplite driver to communicate with a Tripp-Lite SMART1500XL via the serial port. I'm using the cable that was included with the UPS. The tripplite driver simply returns "Failed - giving up..." after 20 seconds. I have verified that the tripplite driver is sending ":W" out the serial port. I am able to use Tripp-Lite's

Hello, I'm newbie with NUT, I'm trying to get work a *Tripp-Lite Internet350Ser*, a small UPS with serial port. The only reference about, is a modification patch that Mr. Patrick Levesque did for NUT 2.4.1 but the actual 2.6.1 looks to not have it yet. I tried all tripp and generic drivers but no success. Has anyone luck with this Tripp-Lite model? Thanks! Iv?n Escobar

Since version 2.0.5 the AVR550U is supported. The X version however is not. The difference, as far as I can see, is the voltage 120V (non-X) vs 230V (X). Is there a way to fake the productid of the X version? Or, alternatively will the X version be supported in the future? Checking device (09AE/1009) (001/004) - VendorID: 09ae - ProductID: 1009 - Manufacturer: Tripp Lite - Product: TRIPP LITE

Hi, I'm running Fedora Core 6 and need to monitor a Tripp Lite SMART2200RMXL2U. I've loaded the nut-2.0.3-2.1 RPM. The UPS is connected via the provided USB cable, and that much appears to work: # dmesg | grep -i tripp hiddev96: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART2200RMXL2U ] on usb-0000:00:1f.4-2 # lspci | grep -i usb 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM

Hi James, thanks for the feedback. The output you get seems generally fine, except for battery.voltage: 0.0 and output.voltage: 164.0; these values are consistent with what Phil DeBoest reported. Upsmon normally executes the shutdown command when you reach the "low battery" threshold, as decided by the UPS and/or driver. It does so by looking at ups.status, not battery.charge. --

I have a new SMART1050SLT Tripp Lite UPS that both tripplite and tripplitesu drivers hate. Both simply time out with a "can't find" message. Does anyone know about the SmartPro series?

I have 2 SmartUOS1050SLT's that apparently protocol 3004, has there been any progress on getting these units supported under nut? I am running version 2.4.1, and get the following output when starting the driver. #lsusb Bus 005 Device 002: ID 09ae:0001 Tripp Lite # upsdrvctl -DDDD start Network UPS Tools - UPS driver controller 2.4.1 Starting UPS: tripplite exec: /lib/nut/tripplite_usb -a