similar to: TrippLite SMART1000LCD

Hi, I kludged support for the TrippLite SU2200XLA into nut-2.4.3 as follows: --- ./drivers/tripplite-hid.c.0 2010-03-03 15:53:20.000000000 -0500 +++ ./drivers/tripplite-hid.c 2010-03-03 15:53:40.000000000 -0500 @@ -81,6 +81,8 @@ { USB_DEVICE(TRIPPLITE_VENDORID, 0x4002), battery_scale_1dot0 }, /* e.g. TrippLite SmartOnline SU1500RTXL2ua */ {

At the company I work for, we are using many TrippLite OMNI900LCD UPSs and are having difficulty setting the lower transfer threshold voltage. On our other model, the Eaton MGE-3S550, this can be set using upsrw to set the input.transfer.lowsetting, but on the Omni900, this option is not available. In our testing, it defaults to ~95v but we want to set it to 84v. More info: - OS = OpenSuse 13.1 -

Citeren Arnaud Quette <aquette op alioth.debian.org>: > Modified: trunk/drivers/tripplite-hid.c > ============================================================================== > --- trunk/drivers/tripplite-hid.c (original) > +++ trunk/drivers/tripplite-hid.c Sun Mar 1 19:56:31 2009 > @@ -84,6 +84,8 @@ > > /* HP R/T 2200 INTL (like SMART2200RMXL2U) */ > {

Just installed version 2.2.1 and have the same problem reported in this chain. I have Mandriva Linux 2008.1 with a Tripplite USB 500 no break. When I start the upsdrvctl I get the "Startup timer elapsed, continuing..." message and then a upsd can't connect error. I copied the file usbhid-ups from version 2.2.0 from another Mandriva system and everything works fine now. Its not

Hi, I was wondering if Tripp lite SMART1000LCD is working in nut or what code I should change to get it to work. I saw some older posts about this model and the OMNI1000 LCD but the model I have has a different product ID, 2007 vs. 2005: Device descriptor: VID:09ae, PID:2007 Device release:0x10, USB release:0x110 Descriptor Length:18, Type:1 Device Class:0, Subclass:0, Protocol:0, Num

Trying to get a Tripp-Lite to work with nut--Ubuntu 10.10. I was getting the error message "unable to claim USB device", tried to unbind the drivers to that device, and had the following delightful experience. In short, continue to get the same problem, and the drivers bound themselves back. Any suggestions? ----------- usb.conf has the following: [Tripp-Lite] driver = usbhid-ups port

Hi, With recent revision, it's impossible to get upsdrvctl started: [root at teevee nut]# /usr/local/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.3.0-1352 Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.3.0-1352) Warning: This is an experimental driver. Some features may not function correctly. Using subdriver: TrippLite HID 0.2 (experimental)

We have multiple TrippLite Omni900LCD UPS. There are a couple pieces of equipment connected to each UPS. I would like to connect the UPSs to one computer through USB which would shutdown the appropriate equipment based on events monitored by upsmon using upssched. I've configured NUT using usbhid-ups driver and compiled/installed NUT. I've done some testing and it seems to work.

I have a Tripp Lite OMNI900LCD. It has a usb connector and claims to be USB/HID. I haven't been able to get it to work with newusbhid or tripplite_usb. Here's lsusb -v output: Bus 001 Device 013: ID 09ae:2005 Tripp Lite Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level)

I've having trouble understanding the NUT compatibility page. Is it compatible with the OMNISMART300? Or the OMNI900LCD? The compatibility page said for instance SMART550 -- tripplite_usb SmartUPS -- tripplite OMNI650LCD -- usbhid_ups so I'm not sure if an OMNISMART300 is like a Smart, or a SMART, or an OMNI, or even if it's supported at all. Thanks in advance for any help!

Attached is the first 32 seconds of the driver output after applying the patch which fixes the battery scaling problem for this UPS. Matthew Stapleton Email: matthew4196 at gmail.com On 10/08/14 01:27, Charles Lepple wrote: > On Aug 8, 2014, at 9:15 AM, Charles Lepple <clepple at gmail.com> wrote: > >> On Aug 7, 2014, at 10:52 PM, Charles Lepple <clepple at gmail.com>

On Aug 8, 2014, at 9:15 AM, Charles Lepple <clepple at gmail.com> wrote: > On Aug 7, 2014, at 10:52 PM, Charles Lepple <clepple at gmail.com> wrote: > >> On Aug 7, 2014, at 10:18 PM, Matthew Stapleton <matthew4196 at gmail.com> wrote: >> >>> I just got a Cyberpower SOHO Value 1200 ELCD UPS and even with nut 2.7.2, it appears to report battery voltage

On Aug 7, 2014, at 10:52 PM, Charles Lepple <clepple at gmail.com> wrote: > On Aug 7, 2014, at 10:18 PM, Matthew Stapleton <matthew4196 at gmail.com> wrote: > >> I just got a Cyberpower SOHO Value 1200 ELCD UPS and even with nut 2.7.2, it appears to report battery voltage too low due to the battery scaling function (In drivers/cps-hid.c). Even though the ups has usb id:

I have a HP T1500 INTL that isn't picked up under 2.4.3. I added the USB device ID to tripplite-hid.c like: /* HP T1500 INTL */ { USB_DEVICE(HP_VENDORID, 0x1f09), battery_scale_1dot0 }, and it seems to work just fine: # upsc UPS1 at localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 30 battery.temperature: 23.9 battery.type: battery.voltage: 40.9

Thanks Kjell for the help with the build problem. Thanks for your input, too, Charles. Now I have a new problem that I think has already been solved. I have Tripp Lite Smart1000LCD UPS (usb), but I can't get the newhidups driver to communicate correctly. I found a thread on the development list from last December where Jonathan Freedman described had a problem with this UPS in a thread

Hi, I have a HP R1500 G2 UPS and want to get it working under Debian Lenny - as this OS is not supported by HP I'm trying to use nut for it - but I can't get it working. Do I have any chance to get the UPS running with nut. I also tried different drivers but had no luck either. Or does anyone has experience with HP UPS under debian ? Any help would be nice ! I tried /lib/nut/usbhid-ups

I am having an issue running NUT and using an TrippLite OMNI900LCD. When I run ./upsdrvctl start I get : [player@V0002-S002 bin]$./upsdrvctl start Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.1.0) Detected a UPS: Tripp Lite /TRIPP LITE UPS Using subdriver: TrippLite HID 0.1 (experimental) dstate_setflags: base variable

Hi, I own a UPS HP T750. Is there a driver for this UPS (either serial or USB)? thx kp

I'm working on a gentoo server with Nut 2.0.5-r1 and libusb-0.1.12. I originally tried the hidups driver which seemed to work, but produced a large amount of unhandled events. Then I tried the newhidups which told me my ups wasn't supported. When I try using tripplite_usb -u root -DDDD /proc/bus/usb/002/002 I get that there isn't a match. But when I try using tripplite_usb -DDDD

Hi, I'm running Fedora Core 6 and need to monitor a Tripp Lite SMART2200RMXL2U. I've loaded the nut-2.0.3-2.1 RPM. The UPS is connected via the provided USB cable, and that much appears to work: # dmesg | grep -i tripp hiddev96: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART2200RMXL2U ] on usb-0000:00:1f.4-2 # lspci | grep -i usb 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM