similar to: USB permission problem

Hi, I was wondering if Tripp lite SMART1000LCD is working in nut or what code I should change to get it to work. I saw some older posts about this model and the OMNI1000 LCD but the model I have has a different product ID, 2007 vs. 2005: Device descriptor: VID:09ae, PID:2007 Device release:0x10, USB release:0x110 Descriptor Length:18, Type:1 Device Class:0, Subclass:0, Protocol:0, Num

These patches allow this device to function in nut.. diff --git a/trunk/drivers/tripplite-hid.c b/new/drivers/tripplite-hid.c index c36da98..dddd13c 100644 --- a/trunk/drivers/tripplite-hid.c +++ b/new/drivers/tripplite-hid.c @@ -71,6 +71,8 @@ static usb_device_id_t tripplite_usb_device_table[] = { { USB_DEVICE(TRIPPLITE_VENDORID, 0x2005), battery_scale_0dot1 }, /* e.g. TrippLite

Hello, I'm new to the list, new to NUT, but not new to Unix-likes. I could use some help getting NUT to talk to my Tripp Lite G1000U. Searching Google for "Tripp Lite G1000U" returns exactly two hits at this writing, so that may not be a good sign. ;-) It may just be rebranded for sale through this source (Costco). Externally, the G1000U looks much like the SMART1000LCD: an amber

Trying to get a Tripp-Lite to work with nut--Ubuntu 10.10. I was getting the error message "unable to claim USB device", tried to unbind the drivers to that device, and had the following delightful experience. In short, continue to get the same problem, and the drivers bound themselves back. Any suggestions? ----------- usb.conf has the following: [Tripp-Lite] driver = usbhid-ups port

Thanks Kjell for the help with the build problem. Thanks for your input, too, Charles. Now I have a new problem that I think has already been solved. I have Tripp Lite Smart1000LCD UPS (usb), but I can't get the newhidups driver to communicate correctly. I found a thread on the development list from last December where Jonathan Freedman described had a problem with this UPS in a thread

Hi, With recent revision, it's impossible to get upsdrvctl started: [root at teevee nut]# /usr/local/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.3.0-1352 Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.3.0-1352) Warning: This is an experimental driver. Some features may not function correctly. Using subdriver: TrippLite HID 0.2 (experimental)

On Aug 28, 2014, at 6:49 PM, Barry Skrypnyk <barry at skrypnyks.com> wrote: > I have searched the archives and googled this problem with usbhid-ups. I would really appreciate any help anyone could offer to solve the problem. > > System: Ubuntu 14.04.1 Trusty Tahr Which kernel version are you using? > Installed nut from Ubuntu repositories ? nut 2.7.1 > > Ups.conf file

[please use reply-all to post to the list - the mailing list does not add a reply-to header. thanks!] On Dec 18, 2017, at 11:37 AM, Ken Olum wrote: > > I have a Tripp-Lite BCPERS450, connected to a system running Ubuntu > 16.04.3 LTS and NUT 2.7.2-4ubuntu1.2. I had to make my own > /lib/systemd/system-shutdown/nutshutdown, but now everything is working > except for powering on

On Aug 29, 2014, at 2:02 PM, Barry Skrypnyk <barry at skrypnyks.com> wrote: > See comments below. > >> -----Original Message----- >> From: Charles Lepple [mailto:clepple at gmail.com] >> Sent: Friday, August 29, 2014 5:35 AM >> To: barry at skrypnyks.com >> Cc: nut-upsuser at lists.alioth.debian.org >> Subject: Re: [Nut-upsuser] Smart1500lcdt will

Another Update: I had to reboot my server today. After the reboot, I had the exact same problem as before without the usb hub. Since I already had the ups connected and communicating, I decided to try to figure out how to fix it. Here is what worked for me using the usb 2.0 hub sudo upsd ?c stop sudo upsdrvctl stop sudo upsdrvctl start sudo upsd Everything connected up and was

See comments below. > -----Original Message----- > From: Charles Lepple [mailto:clepple at gmail.com] > Sent: Friday, August 29, 2014 5:35 AM > To: barry at skrypnyks.com > Cc: nut-upsuser at lists.alioth.debian.org > Subject: Re: [Nut-upsuser] Smart1500lcdt will not connect with usbhid-ups > > On Aug 28, 2014, at 6:49 PM, Barry Skrypnyk <barry at skrypnyks.com>

I have a Tripp-Lite BCPERS450, connected to a system running Ubuntu 16.04.3 LTS and NUT 2.7.2-4ubuntu1.2. I had to make my own /lib/systemd/system-shutdown/nutshutdown, but now everything is working except for powering on and off the UPS. Regardless of the settings of offdelay and ondelay in upsconf, and regardless of whether the AC power is on, when I say "upsdrvctl shutdown" the UPS

I purchased a TrippLite ECO550UPS from Amazon a few days ago thinking I was going to use it for my Windows Media Center HTPC. I've since changed my mind and decided to use Mythbuntu but it I can't get my UPS working with nut. I've tried all of the tripplite drivers and the usbhid-ups driver. The tripplite_usb and usbhid_ups output is listed below. The tripplite and tripplitesu drivers

Tripp Lite Smart1000LCD Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 This TrippLite device (09ae:2010) is not (or perhaps not yet) supported by usbhid-ups. Please make sure you have an up-to-date version of NUT. If this does not fix the problem, try running the driver with the '-x productid=2010'

Barry, I have had success with NUT on Debian and an EATON 5E2000IUSB-AU 5E 2000VA/1200W UPS With 3 x OUTLETS which I believe is good value. I would believe the the EATON ?5E 1500VA/900W UPS With 3 x OUTLETS would work just as well. The 1500VA also uses the same batteries as the 2000VA so I would believe it would run its raited load longer than 2000VA. My eight drive RAID driver uses less that

Tripp Lite SMART1300LCDT # upsc ups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 30 battery.runtime: 2951 battery.type: PbAC battery.voltage: 0.0 battery.voltage.nominal: 24.0 device.mfr: Tripp Lite device.model: TRIPP LITE UPS device.serial: 2250AVLSM872100251 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2

Just installed version 2.2.1 and have the same problem reported in this chain. I have Mandriva Linux 2008.1 with a Tripplite USB 500 no break. When I start the upsdrvctl I get the "Startup timer elapsed, continuing..." message and then a upsd can't connect error. I copied the file usbhid-ups from version 2.2.0 from another Mandriva system and everything works fine now. Its not

I talked to Tripp Lite Technical support. Their policy is that they only support Fedora and SUSE. There is no one there that could help with Ubuntu or NUT issues. The only answer they could give me was to port the rpm files to Ubuntu and use them. This is way beyond my experience level. I will go to the local electronics store and buy a cheap USB 2 hub to see if that works. I will post the

Hi, I kludged support for the TrippLite SU2200XLA into nut-2.4.3 as follows: --- ./drivers/tripplite-hid.c.0 2010-03-03 15:53:20.000000000 -0500 +++ ./drivers/tripplite-hid.c 2010-03-03 15:53:40.000000000 -0500 @@ -81,6 +81,8 @@ { USB_DEVICE(TRIPPLITE_VENDORID, 0x4002), battery_scale_1dot0 }, /* e.g. TrippLite SmartOnline SU1500RTXL2ua */ {

I'm trying to set up a single host to monitor the state of several UPS in my data center. I have a mix of several APC and Tripp-Lite in production. The former are great, the latter are not so much. With the APCs (using usbhid-ups), I can set up configs for each based on the value they report from ups.serial. With the Tripp-Lites (using tripplite_usb), there is no value returned for