similar to: Tripplite OMNIVIS1500XL Connection Refused

Leslie, This message is most appropriate for the NUT user list. I kept Rik Faith's and Nicholas Kain's copyright information because the tripplite_usb driver borrows heavily from the tripplite (serial) driver, but they are not responsible for the mess that I made in the USB driver. See below. On Dec 28, 2008, at 5:28 PM, Lelsie Rhorer wrote: > Gentlemen, > >

https://bugzilla.samba.org/show_bug.cgi?id=8838 Summary: rsync daemon chooses wrong destination place if space and the module name is part of it Product: rsync Version: 3.1.0 Platform: All OS/Version: Linux Status: NEW Severity: normal Priority: P5 Component: core AssignedTo:

So a month or more ago, I posted about continual disconnect messages from this UPS (roughly 2/hour), using nut 2.2.0 on debian etch. Now, I've finally gotten around to running tripplite_usb in debug mode, and these are the results: ... send_cmd(msg_len=2, type='L') send_cmd(msg_len=2, type='S') send_cmd(msg_len=2, type='B') send_cmd(msg_len=2, type='L')

Hi everyone, Here are the manifest I am using: In file ''*modules/test/manifest/init.pp*'': class test ( $test = undef, ) { notice("Here is the message: ${test}") } Now in ''*modules/saas/manifests/client/sudo.pp*'': class saas::client::sudo { class { ''test'': } } Now in ''*manifests/sites.pp*'': import

This problem is being experienced on a RedHat Enterprise 4 server, with Samba version 3.0.11. The user seems to be repeatedly authenticating every few seconds, even though they have been authenticated once, are logged onto the domain, and using various shares. Only one of the 30 users on the network has this issue. Any ideas would be appreciated. ----------------------Log

I am running Asterisk 1.6.2.17.2 with a Openvox A400 card with 2FXO/2FXS modules. I'm trying to set-up things to route analog fax calls from a FXO port to an analog fax machine on a FXS port on the same card. Outgoing faxes work just fine. But incoming faces are routed to the right DAHDI extension, but the call dropped right as the fax machine rings for the first time. The fax machine

Dear Friends, I have postfix mail server When I try to install amavisd-new, clamAV, SpamAssassin follow this link "http://wiki.centos.org/HowTos/Amavisd". I have done all the configuration after that when I restart clamav So It is giving my this error message Stopping Clam AntiVirus Daemon: [FAILED] Starting Clam AntiVirus Daemon: LibClamAV Error:

https://bugzilla.samba.org/show_bug.cgi?id=8834 Summary: Option --recursive fails if followed by another option Product: rsync Version: 3.0.9 Platform: All OS/Version: Other Status: NEW Severity: normal Priority: P5 Component: core AssignedTo: wayned at samba.org ReportedBy: axelboldt at

Greetings, It just strike me that they are no available version of OpenSSH version 5 or any available versions with the ChrootDirectory option. Any reason why ? Thanks,

Well I haven't tested out the CentOS 7 for i386 yet as sent in the message of 06/02-- https://lists.centos.org/pipermail/centos-devel/2015-June/013426.html Nor have I seen any additional information. So how is this going? I'm almost ready to jump in as I would really prefer to be on Gnome 3. -- -------------------------------------------- MzK ?The journey of a thousand miles begins

Hello, I wanted to see if there's any chance that NUT will support a few new TrippLite UPSes that we just bought: Sep 9 01:42:25 miko /kernel: uhid0: TRIPP LITE TRIPP LITE OMNIVS1500XL, rev 1.1 I grabbed the devel sources via cvs, but am having trouble building it when I enable the "newhidups" driver: gmake[1]: Leaving directory `/usr/local/src/nut/common' drivers/

Hi all: I am trying to get a TrippLito OMNI1000LCD working with nut. Even with the development branch, I get the following.... upsdrvctl start Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools: HID UPS driver 0.13 (2.1.0) Warning: This is an experimental driver. Some features may not function correctly. Detected Tripp Lite TRIPP LITE UPS on port /dev/usb/hiddev0

For my Smart 2200, a charged battery string is anywhere between 25.6 and 26.8 volts. I'm seeing nut report 13.0 volts, which seems suspicious. Even if the UPS were reporting half of the actual battery voltage to keep protocol compatibility with models having a 12V battery system, the value of exactly 13.0 seems unlikely. According to the page at

Hello list- Anyone with Tripplite SMX1500XLRT2U (http://www.tripplite.com/EN/products/model.cfm?txtModelID=2687) successfully integrated with NUT through serial port? I'm trying to connect to SMX1500XLRT2U using serial cable shipped with UPS under FreeBSD 6.3-STABLE and NUT 2.2.2 installed from ports. Unfortunately, it looks like it couldn't be recognized. %dmesg | grep sio sio0:

reported through launchpad: https://bugs.launchpad.net/bugs/253999 the possible regression is between nut 2.0.1 (sarge) and 2.2.1 (confirmed Jamie?) @Arjen: it may be related to some of your changes there... @Jamie: we'll need some debug output from the drivers (-DDD) Arnaud

Hi, I've been trying to get my new Tripplite OmniVS100 UPS (USB Connection) to work on my system. What I have is: Ubuntu 10.04 Server Nut 2.4.3 /etc/nut/ups.conf [omni] Driver = tripplite_usb Port = auto Desc = "My Server" /etc/nut/nut.conf MODE=standalone Iget the following error when using the > sudo upsdrvctl start Network

Tim, thanks! Does this UPS have a USB port as well? The key thing for TrippLite UPSes is this command: Command to UPS Response from UPS Function :00FFCR 00005XXXXCR unknown The second and third bytes are the protocol number. I think I may have misinterpreted something in the formatting -- what are the hex values of the bytes in this command/response pair? I don't have time to

I am using NUT 2.0.2 on SuSE Linux 9.2 which is attached to a Tripplite SmartPro Net 2200 UPS. I have Nut using the included tripplite driver, and it is communicating with the UPS correctly. The battery voltage of theTripplite reported by the NUT server is 13.5VDC. If I attach the UPS to a Windows 2000 server running Tripplite's PowerAlert software, the battery voltage is being reported as

Hey I recently picked up a couple SMART1000LCD TrippLite UPS's. These are similar to other usb ups's that have been mentioned on the list in the past few months. I tried a few patches posted last month and got some amount of success. That being said, I am thus far unable to get much love from the actual upsd itself. Any pointers in terms of what I may need to change or what help I can

Hi Jonathan and Charles, yes, the Tripp-Lite HID subdriver was under development. I started it based on the debug output posted by somebody on this list a few weeks ago, but then I either didn't get the information I needed, or got too busy to act on it. That driver is still incomplete, in the sense that there are many unmapped device variables. Jonathan, if you run this driver, could you