similar to: Having trouble with the Liebert GXT2

This mib used to work, so is there a way to go back to the version prior to this one without downgrading the whole package? * Starting UPS drivers... Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Generic SNMP UPS driver 0.44 (2.4.1) Detected GXT2-2000RT120 on host upswallleft (mib: ietf 1.3) [upswallleft] nut_snmp_get: 1.3.6.1.2.1.33.1.4.4.1.4.0: Error in

Hi, I just installed NUT to monitor 4 UPS, all APC, all with Network card APC 9617. NUT have problem to access the following SNMP OID on all the UPSes: Detected Smart-UPS 3000 XL on host apc4.cs.ait.ac.th (mib: apcc 1.1) [apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.2.1.2.1: Error in packet: (noSuchName) There is no such variable name in this MIB. [apc4] nut_snmp_get:

Hi, I got a shiny pair of new PowerWare 9155 UPS (3 input phaes, one output phase), running parallel. Since I didn't want to install a Windows box to run Powerwares software I now went nut(s) ;-) So far things look pretty good, snmp-ups talks to both ups using the pw mib. Though I get these messages, when I start the driver: [ups2] nut_snmp_get: 1.3.6.1.4.1.534.1.4.4.1.3: Error in packet:

Hi, I got a shiny pair of new PowerWare 9155 UPS (3 input phaes, one output phase), running parallel. Since I didn't want to install a Windows box to run Powerwares software I now went nut(s) ;-) So far things look pretty good, snmp-ups talks to both ups using the pw mib. Though I get these messages, when I start the driver: [ups2] nut_snmp_get: 1.3.6.1.4.1.534.1.4.4.1.3: Error in packet:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I figured out why nut seemed to segfault at startup from my Solaris boxes (and snmp-ups too) - I believe that nut is trying to use some MIBs that do not exist on my particular PW9170, for whatever reason. It dies on my Linux box too, complaining like this: pkdick:~/nut/bin# ./snmp-ups -x mibs=pw -x community=publicstring upsname Network UPS Tools -

Hello list, I've installed NUT on an HP blade server, and I try to get it communicating via SNMP with 2 HP R3000 UPSes, each fitted with a AF465A management card. To do this, I used the snmp-ups driver, and configured it for the "cpqpower" MIB. Communication with the UPSes is established. My problem is that both UPSes constantly return the "OL OB" status which, in

I'm trying to set up nut with a MGE UPS equiupped with a network management card, but encountered a problem. UPS: MGE Pulsar M 3000 Network Management card (installed in the UPS): 66102 (2006 edition) Operating system: FreeBSD Nut port version: 2.0.5 Nut driver: snmp-ups According to MGE in Norway this card is supported by nut, but only the old version of the card (66244) is listed on

Good Day, I was wondering what the status was on support for the Liebert GXT2 family of UPS units? I've noted that the contact closure mode is supported along with experimental support for the 3000VA/230v model which I assume is the serial 'smart' signaling? I have several GXT2-1500's which I'm interested in getting supported in Linux and, as I have access to both the USB

Hi guys, I wrote for Arnaud that I tested the liebertgxt2 driver in 2.4.3. I compare output of Richard's code, Spiros code and nut 2.4.3. Output of Richard and Spiros codes was same and right. Output of Liebertgxt2 driver isn't. Examples: Our UPS : Liebert GXT2-1000RT230 Model Name,Firmware version,SN,date of manufactured values was right. Fields

Hi All, Attached is a patch against nut-2.4.1 that adds a driver for the ESP2 protocol, as used by the serial port found on the Liebert GXT2. This driver is mostly based on: http://www.csc.liv.ac.uk/~greg/projects/liebertserial with additional bit field information from Spiros Ioannou. liebert.c at the above url has been tested by a few people to return the correct status data. Besides me,

Is this the best place to get into contact with the snmp-ups driver developers? I am trying to get the snmp-ups driver to work with a Liebert GXT2 UPS, and it works for knowing when it goes on battery and such, but when it comes to shutting down the Liebert UPS, it doesn't work. Any suggestions or docs that I need to read? -- Ronald Reed Manager of Computer Operations ARM SGP ACRF Site

hello in first sorry for my poor english i've got a new ups "leibert GXT2-6000RT230" and i would like to use nut to make shutdown some server plugged on it. I bought a card with this ups "opencomms web card". I dont know where to plug the serial cable, directly on the serial port on the ups or on the serial port on the opencomms card, and with wich cable. I've got a

Hi, ? have a necron snmp ups. nut-scanner cant find it. i tried to add with these definition but it fails.. [test5-ups] driver = snmp-ups port = 10.9.40.19 community = asdf12 desc ="test" i run driver with debugging , result is , root at upsviewer-debian:/usr/local/ups/bin# ./snmp-ups -DDDDDDD -a test5-upsNetwork UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) 0.000000

Hi, ? have a necron snmp ups. nut-scanner cant find it. i tried to add with these definition but it fails.. [test5-ups] driver = snmp-ups port = 10.9.40.19 community = asdf12 desc ="test" i run driver with debugging , result is , root at upsviewer-debian:/usr/local/ups/bin# ./snmp-ups -DDDDDDD -a test5-upsNetwork UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) 0.000000

Hello, i'm trying to monitor a APC Smart-UPS 1000 behind a APC AP9630 Network Management Card via SNMPv3 using the AES Privacy Protocol. * OS name and version: Debian 10.1 * exact NUT version: 2.7.4 * NUT installation method: from debian package 2.7.4-8 * exact device name and related information * Model Number AP9630 * Hardware Revision 08 * Manufacture Date

based on r2432, i took this with "svn diff --revision HEAD liebert-esp2.c" fixes: 1) new way to initialize model, firmware etc. variables, the strok way failed because some vars had spaces. (e.g. model "Liebert NX") 2) new multipliers for: frequency, nominal power. I get correct readings now, before I had 500 Hz, and 200VA and now it's ok for me. Test with your models. 3)

On 2/24/2014 11:10 PM, Charles Lepple wrote: > On Feb 24, 2014, at 10:29 PM, Jason R Begley wrote: > >> Thanks for the quick response Charles! I may not have gotten the correct output from the snmpwalk, let me know if the attachment is usable. Thanks! > Sorry, it's basically all comments. Do you have the stdout from the subdriver script? Also, how is the MIB file installed?

Hello All ! Recently I have upgraded NUT to 2.4.1, and now I can't monitor old IMV LanPro S3 UPS with old SNMP board. Previously it is monitored OK, but now snmp-ups refuses to start: [root at perforce /usr/local/etc/nut]# /usr/local/libexec/nut/snmp-ups -a lanproups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.44 (2.4.1) debug level is '7' SNMP UPS driver : entering

Here's the first update of ups.status: 0.102449 getting data: ups.status (.1.3.6.1.4.1.232.165.3.4.5.0) 0.102546 su_ups_get: ups.status .1.3.6.1.4.1.232.165.3.4.5.0 0.102646 nut_snmp_get(.1.3.6.1.4.1.232.165.3.4.5.0) 0.104539 SNMP UPS driver : entering su_status_set() 0.104641 su_find_infoval: found OL (value: 3) 0.104730 => value: 3 0.104823 getting data: ups.status

On Feb 24, 2014, at 11:48 PM, Jason R Begley wrote: > 0.073855 load_mib2nut: trying classic method with 'delta_ups' mib > 0.073878 Entering nut_snmp_get_str() > 0.073899 nut_snmp_get((null)) > 0.073918 nut_snmp_walk((null)) Arnaud, The gen-snmp-subdriver.sh script is setting mib2nut[i]->oid_auto_check to NULL for new drivers (with no instructions