similar to: Asterisk Executing outbound dial number twice

Hi there, this is the first time that I'm building an Asterisk-server. I have compiled Asterisk together with Zaptel on an CentOS 5.3-system. Zaptel is for later, when configuring the POTS-line. Now first internal communication with SIP. Thought it would go easier... I have 2 Grandstream IP-phones : BT-201 and GXP-1200. These are my settings : sip.conf : [root at asterisk asterisk]# cat

Dear all, I have an asterisk sip issue which I don't believe is unique. I use a registrar (sipgate.co.uk) where I have 3 different accounts. These accounts provide me with three seperate local phone numbers which allow me to allocate them to seperate users. By using just one of these accounts I can set asterisk up to send and receive calls no problem. However, when I start to introduce an

Hi My first post get no answer :=<, i post new with new elements. I have two Asterisk server, running on Asterisk 1.6: SRV1 = 192.168.0.5 on Asterisk 1.6.1.4 SRV2 = 192.168.0.20 on Asterisk 1.6.1.8 I want create a link for exchange call. on Srv1: iax.conf: [general] bindport=4569 bindaddr=0.0.0.0 language=fr bandwidth=low jitterbuffer=no forcejitterbuffer=no autokill=yes

I have a setup of 3 Cisco 7940 running Sip image 6.3. All these phone are registered by the below information *CLI> sip show peers Name/username Host Mask Port Status 2002/2002 192.168.22.199 (D) 255.255.255.255 5060 Unmonitored 2001/2001 192.168.22.200 (D) 255.255.255.255 5060 Unmonitored 2000/2000 192.168.22.198 (D)

Hello All, one of the extensions fall into a loop, I don't know how to hangup that channel -- Executing [i at autoatten:2] Goto("Local/100 at sipphones-000001b2;2", "s,2") in new stack -- Goto (autoatten,s,2) -- Sent into invalid extension 's' in context 'autoatten' on Local/200 at sipphones-000001b2;2 -- Executing [i at autoatten:1]

I have a dial plan that includes a company phone directory as a main menu option. If they just sit at the main menu, after 20 seconds, they are transferred to the operator. If the user picks an extension from the directory, they are transferred to the proper extension. If the called number is not available, they are transferred into VoiceMailMain. They leave a message, and hang up. The hang

Hello All, I was wondering where does Asterisk stores the blacklist numbers? I looked into the dialplan and it shows that it *"Set(DB(blacklist/${blacknr})=1)"* the number... Does it save in MySQL DB? hyperion*CLI> show dialplan app-blacklist-add [ Context 'app-blacklist-add' created by 'pbx_config' ] '1' => 1.

Has anyone implemented "hot seating" in any neat way? This where people can log in to any phone in the company and have their calls/voicemail come to that particular handset.....

Hello everyone... I'm trying to get up a testing pbx installation. Following instructions of what've read from the handbook and from asterisk's wiki, I wrote the dial plan as follows: [general] ; ; static = yes ;[globals] ; [default] ; exten => 0,1,Answer() exten => 0,2,Playback(fcopba1) exten => 0,3,Hangup() exten => *0,1,Answer() exten => *0,2,Record(fcopba1:gsm)

When I first to the "add extension" the "show dialplan" has the lines that say "SIP/" but after I do a "save dialplan" and a "stop gracfully" and restart the lines with "SIP/" are gone. ************************ "Show dialplan" before: ************************ asterisk01*CLI> [ Context 'default' created by

I have an "outbound-ld" context as follows: [ Context 'outbound-ld' created by 'pbx_config' ] '_1NXXNXXXXXX' => 1. Macro(enumdial|${EXTEN}) [pbx_config] 102. Wait(1) [pbx_config] 103. Set(LINE=${IF($[${LINE}=pots]?link2voip:${LINE})}) [pbx_config]

How to change status of peers "Unmonitored" to monitored? Home users showing "Unmonitored" some display timing. Name/Username Host Mask Port Status zoiper_kathy/zo 112.200.83.69 (D) 255.255.255.255 9330 Unmonitored clinic_server (null) (D) 255.255.255.255 0 Unmonitored voip

Can someone refresh my memory how to backlist caller ID in asterisk 1.8? I had it working in ver. 1.4 but in 1.8 it changed. -- Joseph

I have a [start] context that all my inbound and '0' calls are routed into. Because of the way I want to set my system up, I want to prompt the user to enter a 1 if they know the extension, or a 2 for a directory and nothing else. It works, however there is a 5 to 10 second delay after enter the 1 or 2 before the system responds. I have read over the wiki on how asterisk handles digit

Greetings, Running CVS HEAD about 3 weeks old, I have been beating my head trying to get this to work properly.. Or at least figure out what's going on. Maybe I have done things wrong... I have created a 'catch all' extension at the end of our last context where all phones & voicemail extension exist. This catch all is included in all and works quite nicely except when voicemail

Hello Asterisk users, Can someone thwack me with a clue stick please? I am following the Asterisk TFOT book Dial() example trying to get the limit and announcements to work as per below. These settings seem to have no effect. There are no warning messages after 4 minutes or every 30 secs thereafter and the call lasts longer than 5 minutes. gunner*CLI> show dialplan [ Context

I have a TMD400 card installed in a PC with one fxs (installed in slot 2) and two fxos (installed in slots 3 & 4).? fxos work fine but I am unable to get a dial tone for any devices connected to the fxs.? I have correctly connected the power supply to the card and I have even tried moving the card from slot 1 to 2 on the board. Below is from the console when I try to route a call from FXO on

Yes, I have tried that too (i.e, exten => +17775551212,1,Log(WARNING, TWILIO)). It does not work and NO error message in CLI. I have also tried http://orourketech.com/elastix-plus-sign-caller-id-messing-things/ since I first emailed this group, but that does not seem to work either. Here is my log: [Dec 2 15:09:28] NOTICE[26464]: res_pjsip_session.c:1920 new_invite: Call from

I was wondering why *foo at default should match '_*[0-9a-zA-Z].*0.' in 1.6.13. Who is making the parse error, * or me? CLI> dialplan show *foo at default '_*[0-9a-zA-Z].*0.' => 1. NoOp(${EXTEN}) [pbx_config] 2. Set(accountcode=${CUT(EXTEN,*,2)}) [pbx_config] 3. Set(extension=${CUT(EXTEN,*,3)}) [pbx_config]

Asterisk isn't playing my voicemail greetings even though they are defined. Below are the relevant configs(from show dialplan) as well as the level 3 verbose messages asterisk is giving. Also a listing of the directory. Asterisk just plays the "The person at extension..." message, not the greetings I have recorded. Thanks -- asterisk*CLI> show dialplan macro-stdexten [