similar to: making announcements

How can I let asterisk immediately dials a trunk when off hook?

How can I mute the message "please enter the number you wish to call and press the # key" in a2billing??? I tried use_dnid = YES but still I keep getting the message prompt... thanks

Happens quite often. X100P FXO card puts the PSTN line offhook, so that no calls go out or come in. The outside callers get a busy siganl while inside callers cant dial PSTN. Its a DELL optiplex P3 128MB ram 500MHz processor. Here is some more info: (see the zapata.conf in the end) Please direct me where to look for problem. Thanks!!! ======================================== pbx1*CLI> zap

> -----Original Message----- > From: Jacqueline Lee [mailto:jlee@isdomaininc.com] > Sent: Friday, September 23, 2005 11:46 AM > To: asterisk-users@lists.digium.com > Subject: channel offhook state > > > We are using a digium card (TDM400) with asterisk for our access to the > PSTN. Initially when the server starts, all the zap channels on the card > are in the

Hi, I would like * to treat a SIP extension as a normal extension, when it comes to the busy functionality. In other words, if someone tries to call the SIP phone and there is already an ongoing conversation, the new caller should get a busy message/tone Is there any parameter that I can set? Is this something that should be configured at my softphone? Best, PHM

Is there a way to busy out a Zap channel? I have a customer who is having problems with a line connected to a TDM800 card and we would like to busy out that line. Since that line is the head of the hunt group I cannot simply disable that channel, I need to busy the line so calls will come over the other lines. -- ?Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director

I have an interesting problem. I am attempting to install a payphone utilizing a Cisco ATA-188. The payphone actually works, but there are some timing issues. What happens is you pick up the payphone and the ATA grabs a line and goes offhook. While you monkey with putting money in and dialing the number, you are eating up the time before you get the offhook reorder tones (or howler tones

I would like the ability for a sipura sip device to instantly connect to an asterisk server as soon as the sipura sip device goes offhook and before any digits are pressed. This way asterisk can provide the dialtone and the dialplan. This also allows me to play a greeting to the phone before giving them a dialtone. Is there any way to do this, like possibly having the sipura device dial a

Re: openssh-2.9.9p2 versus Solaris 2.6, Forte C version 6upd2 The compiler treated the call to do_pre_login in session.c line 581 as a prototype, warned of inconsistency with the function definition starting line 628: "session.c", line 628: identifier redeclared: do_pre_login current : static function(pointer to struct Session {[struct definition suppressed]}) returning void

Does anybody know if there are any external telephone-keypads for sale anywhere? (containing the keys 0-9, *, # and onhook/offhook would do) I am looking for a keypad to control a softphone and would prefer the controls to be in the physical world instead of as a window. Sincerely, Markus Hakansson

I have an Asterisk@Home 1.3 server (Asterisk 1.0.9) and recently added a TDM400P with (1) FXO card on port 4. Inbound calls are always successful but outbound calls fail 75% of the time with intercept messages from my dial tone provider that include "we're sorry, your call did not go through", and "we're sorry, when placing a local call it is now necessary to dial an area

I am searching for a way to add a 2 second delay before calling out with Dial(). Sometimes I get the message "you must first dial a 1 to place this call". I presume the phone company is missing the first digit pulsed out sometimes. How do I put a 2 second delay after coming offhook and before dialing the digits? Thanks, jerry

I have made bri-stuff.0.0.2rc19 to work (I think) but I can not achieve any in-dialing nor I can dial out; this is what I have from "pri intense debug span 1" command ---------- *CLI> pri intense debug span 1 Enabled EXTENSIVE debugging on span 1 -- Executing Playback("SIP/201-a862", "tt-weasels") in new stack -- Playing 'tt-weasels' (language

I have a TDM400p with 3 FXS mods and 1 FXO mod. I have all set up with what seems to be correct settings (according to digium and asterisk wiki). As soon as I plug in my POTS line into FXO mod the line goes into offhook state (whether I have power to the card or not). Should this happen? When I try to call * box all I get is busy signal. I've installed stable version, cvs version, change

Anyone else got a Sipura 3000 in the UK? Apart from CID not working it also seems to not notice any of the line state changes on the PSTN when the remote party terminates the call. It only recognises the offhook signal which gets sent much later. Chris

I finally got my X100P working and now I have a question. I have several Skutch phone line simulators. My X100P works as expected with both a POTS line and an analog PBX port, but when I use a phone line simulator it doesn't answer the line. The phone line simulator doesn't power the line until the phone set goes offhook. Asterisk shows the RED alarm and then the alarm clearing but never

Hi, I've dug a bit through the wiki and the mailing lists, and haven't really seen anything like this, but there must be someone out there doing this. Basically, there is a fax line that I don't want to answer inbound, but I want it available to do dial out from. Right now, we are using a busy wait around the ringing line, but I was hoping for something that might be a little more

Hello list, I have reason to believe that ADSI can be spoken to phones even when they're onhook. Is this true? Does anyone know? Right now, I'm having trouble figuring out how to do anything to an onhook channel other than ring it. Does this require a magic application and some serious voodoo? Any pointers? I got onto this idea because I noticed that whenever I got voice mail on a

Hi I have asterisk 1.4 I want to make a MGCP trunk as a client to connect to a provider who is using MGCP protocol, he provided me with user & password, I tried a custom trunk: MGCP/$OUTNUM$@user:password at 66.152.163.106:4000 Not seems to help, Any suggestions plz?

I have fixed this before, but I cannot for the life of me remember how I did it. I have a TDM400P with one fxo module and one fxs module. I setup Asterisk @Home and everything works fine, except when I try and call out. If I call out with a SIP phone it calls the zap extension and not the pstn line? If I take the zap extension offhook and call with the SIP phone it dials out the pstn line