asterisk users - Apr 2004 - ZAP channels

I have made bri-stuff.0.0.2rc19 to work (I think) but I can not achieve
any in-dialing nor I can dial out;

this is what I have from "pri intense debug span 1" command

----------

*CLI> pri intense debug span 1
Enabled EXTENSIVE debugging on span 1
    -- Executing Playback("SIP/201-a862", "tt-weasels") in
new stack
    -- Playing 'tt-weasels' (language 'en')
    -- Executing SetCallerID("SIP/201-a862", "340") in new
stack
    -- Executing Dial("SIP/201-a862", "Zap/1/333") in new
stack
> [02 ff 03 08 01 03 05 04 03 80 90 a3 18 01 89 6c 05 21 81 33 34 30 70
03 c1 33 33 a1 ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 127        EA: 1
>   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
> 25 bytes of data
> Protocol Discriminator: Q.931 (8)  len=25
> Call Ref: len= 1 (reference 3/0x3) (Originator)
> Message type: SETUP (5)
> Bearer Capability (len= 3) [ Ext: 1  Q.931 Std: 0  Info transfer
capability: Speech (0)
>                              Ext: 1  Trans mode/rate: 64kbps,
circuit-mode (16)
>                              Ext: 1  User information layer 1: A-Law
(35)
> Channel ID (len= 3) [ Ext: 1  IntID: Implicit, Other Spare: 0,
Exclusive Dchan: 0
>                        ChanSel: B1 channel
                         ]
> Calling Number (len= 7) [ Ext: 0  TON: National Number (2)  NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>                           Presentation: Presentation permitted, user
number passed network screening (1) '340' ]
> Called Number (len= 5) [ Ext: 1  TON: Subscriber Number (4)  NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '33'
]
> Sending Complete (len= 0)
    -- Called 1/333
    -- Hungup 'Zap/1-1'
  == Spawn extension (default, 4000, 3) exited non-zero on
'SIP/201-a862'

--------------


from what I understand here I have initiated a call on ZAP but it dialed
number 1/333 instead of 333

this is my zapata.conf file

----------------

[channels]
;
; Default language
;
;language=en
;
; Default context
;
;
switchtype = euroisdn
signalling = bri_net_ptmp

pridialplan=local
echocancel=yes
immediate=yes
context=default

group => 1
stripmsd=> 1
channel => 1-2
-------------------

and here is a portion of extensions.conf which deals with outside call
(or tries);


exten => 4000,1,Playback(tt-weasels)
exten => 4000,2,SetCallerID(340)
exten => 4000,3,Dial(Zap/1/333)

exten => _5xxx,1,Dial,Zap/g1/BYEXTENSION


can anybody help me to fix what I am doing wrong?

----
The linuX Files -- The Source is Out There. 

mailto:marko@printel.hr
http://printel.hr

Is there a way to get what channels are not in use from the CLI?

ZAP SHOW CHANNELS just lists the configed channels and ZAP SHOW CHANNEL
N just returns OffHook as long as the phone is plugged in.

This is using 2 TDM400 4 port FXO cards ustilizing 6 ports to a channel
bank.

The analog lines never show anything other than OffHook.

<sigh> where is the Wiki when I need it...

Thanks,
Wiley
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050614/cb943933/attachment.htm

voip-info is back up, at least for me ;-)

Wiley Siler wrote:
> Is there a way to get what channels are not in use from the CLI?
>
> ZAP SHOW CHANNELS just lists the configed channels and ZAP SHOW 
> CHANNEL N just returns OffHook as long as the phone is plugged in.
>
> This is using 2 TDM400 4 port FXO cards ustilizing 6 ports to a 
> channel bank.
>
> The analog lines never show anything other than OffHook.
>
> <sigh> where is the Wiki when I need it...
>
> Thanks,
> Wiley
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

Hi guys,
on my Asterisk box I've got 3 PRI, and I need to use 2 of those, with
one guest, but I see that only the 3rd is used.
This is what I've put into my extensions.conf:
-------------------------------------------------------------------------------
[trunk]

exten => _7653.,1,SetCallerID(${CALLERID(number)})
exten => _7653.,2,Dial(${PRITRUNK2}/${EXTEN})
exten => _7653.,3,Dial(${PRITRUNK3}/${EXTEN})
exten => _7653.,4,Congestion
------------------------------------------------------------------------------

What's wrong?

Thanks!

--
.:FaberK:.