similar to: Mitel PBX caller id format?

Hi all... I have a problem with caller id on my asterisk server. here is my configuration : centos-5, asterisk 1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2 ibm X-3200 series, xorcom astribank (16fxo, 8fxs), 16 line telco (hunting) everything fine until I try to feed my app with caller id. My extensions.conf : [incoming1] exten =>

i belong to india. i am making pbx using sangoma fxo card. i want that when ever call comes to my PSTN line i should see the no from where call is coming. so i have to configures chan_dahdi.conf according to my region. i checked dahdi.conf and in that they have mentioned for india

Hello gang, We just got MaBell to turn on our callerid. I tested the capability with a southwest bell box and a plain phone, so I know the line is sending the signal. I'm running Asterisk SVN-branch-1.4-r204834 using a TDM400P card. Here is my dahdi_cfg -vv output: dahdi_cfg -vv DAHDI Tools Version - 2.1.0.2 DAHDI Version: 2.1.0.3 Echo Canceller(s): MG2

My outgoing FXO calls are answered but have no audio in either direction if I have callprogress=no in chan_dahdi.conf. If I change to callprogress=yes then the audio returns. My chan_dahdi.conf file is listed below. Can anyone point-out why callprogress=no isn't working? #cat /tmp/a [trunkgroups] [channels] language=en context=incoming toneduration=40 ;usedistinctiveringdetection=yes

hello all i have asterisk 1.8.22 and have problem with caller id. this is my scenario: PSTN --> FXO ---> FXS ---> phone(223) when i call from a 223 to another phone, every thing is ok and caller id (223) is shown in called phone. but when i call from another phone to 223, no caller id is shown and just zero is shown. if i set callerid=12345 in chan_dahdi.conf file, when another phone

Hi all! I am in the same situation here in Sweden, but I just got the X100 card and don t get it to work with DTMF caller ID. Is the only way to solve this to buy a TDM400 card w FXO modules? Is it just a driver question or a HW issue with the X100 card? Where to find dok about the new keywords in conf files like "cidstart=polarity" in zapata.conf? rgds Gunnar >>>

Hi, I am using asterisk 1.4.28 with freepbx and Wildcard TDM410P card. Everything is working fine except the caller ID of incoming call from PSTN line. The phone display is showing "Unknown" when there is an incoming call. *My log file showing this while an incoming call on PSTN line:* tail -f /var/log/asterisk/full [Dec 30 06:36:16] DEBUG[2559] dsp.c: dsp busy pattern set to 0,0

Hey all, I recently noticed that DTMF caller-ID was implemented in CVS, so I requested the service from my telco (the Dutch KPN) and tried to get it going in Asterisk (current CVS), without success so far. This system has 1 X100P, 2 TDM400P's with 4 FXS-modules each and 2 HFC-PCI ISDN-cards (zaphfc-driver) in it. The analog line I'm trying to get caller-ID working on is obviously on the

Hi! I'm trying to set up an asterisk based PBX with a TDM400P +2 FXS +2 FXO modules in UAE/Dubai for home switching / voicemailing. I am using the card Asterisk/Zaptel 1.4.0. I want to include a special route when a certain caller calls into via PSTN. The problem is that I cannot detect the Caller ID. I tryed various setting (cidsignalling, cidstart) in my zapata.conf, here is the last

Hello, I've one astribank with 8 FXO unit and 8 pstn lines connected to the astribank. When I receive calls on my ipphone I get always Unknown callerid. It's is possible to receive the callerid from the lines on the astribank unit? This is my config: [channels] language=es context=from-zaptel signalling=fxs_ks ;rxwink=300 usecallerid=yes callerid=asreceived ;cidsignalling=bell

Hi, I am using asterisknow 1.5.0 and Wildcard TDM410P card. Everything is working fine except the caller ID of incoming call from PSTN line. The phone display is showing "Unknown" when there is an incoming call. I think the same problem listed here: https://issues.asterisk.org/view.php?id=6683 There is one patch on this link but i don't know how to apply patch on asterisknow.

[18884732963 at from-fax-machine:... - your call is hitting the from-fax-machine context - yet your 'fax' exten is in the from-pstn-4 context. See the "[2011-03-17 13:40:29.6] NOTICE[8825] chan_dahdi.c: Fax detected, but no fax extension" line. When Asterisk detects an incoming fax tone - it tries to automagically route the call to the 'fax' extension in the SAME

Okay, I can't find what might be causing this. Here is what I got: Asterisk server hooked up to a digital T1 line (full 24-channel) via a Digium card. Verizon has turned on caller ID on the first line (I can guarantee it is on as I can hear the FSK tones on this line but not the others). Using zttool an ZapScan() I have determined the following: 1) The RxB/RxD bits toggle from 1 to 0

Hello list, We have some kind of a problem with our Asterisk installation. We want to be able to publish different caller id when placing outbound calls through the PSTN. We have Asterisk with TE410P and T1 from FDN Communications. The problem is that all our outbound calls show our main number, regardless of what we set with SetCallerID, even using CallingPres with all possible

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> <title></title> </head> <body bgcolor="#ffffff" text="#000000"> <br> <meta content="text/html;charset=ISO-8859-1"

I am running Asterisk 1.6.2.17.2 with a Openvox A400 card with 2FXO/2FXS modules. I'm trying to set-up things to route analog fax calls from a FXO port to an analog fax machine on a FXS port on the same card. Outgoing faxes work just fine. But incoming faces are routed to the right DAHDI extension, but the call dropped right as the fax machine rings for the first time. The fax machine

I'm having real problems with my connection to BT, it is a home line, but after a while it sets an alarm and only a restart of asterisk resets it could some one look at the below configs and suggest any changes to make this more reliable Thanks for your help Robb asterisk version 1.6.1.10 dahdi version SVN-trunk-r7445 dahdi_scan active=yes alarms=OK description=Wildcard TDM400P REV I

Hi, I am using TDM400 card with 3 fxs and 1 fxo. I am struggling to detect hangup tone or disconnect supervision tone from my CO. I attached the recorded wav file which contains my telco's disconnect supervision. I am using , asterisk-1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI

Hello... I have a big problem with asterisk. Every time i make a call asterisk does not bridge the zap channels. The zap channel from which i'm calling remains in state:ring and applicaton:dial and the zap channel with the external line configured remains in state:dialling an Application:AppDial. Zap/20-1 agentie s 1 Dialing AppDial (Outgoing Line) 09399 (None) Zap/9-1 int_omg 09399 5 Ring

Dear All, I am a newbie about asterisk. I have 1x X100P card 3x Sip phone I got aware of problem, after I saw the caller id on my sip phone. I noticed that if I receive a call from GSM Operator A, I can see caller id. But any other operator, I got no caller id, even my direct PSTN service operator. So at that moment I was using *1.0.9. than I changed to asterisk@home 1.3(1.0.9). I got same