similar to: T38 fax detection using g729

Hi, I explain what I want to do.. All the operators share their phones. The number of the operator isn't constant, so it's possible that two operators share all the phones. They need to move all around, so they pick up the first phone they find. If there are only few operator is very annoying for them to ear the other phones ringing while they are at the phone! So I'dd like to limit

Hi, this is an old outstanding problem, unfortunately I don't remember how to walkaround it. I use asterisk 1.8.3 and I have a public IP in my network interface. As soon as the Internet connection goes down, phones stop working. I want to be able to use pstn, isdn and the gsm gateway even if the Internet connection goes down, how can I achieve it? Thank you, Darkbasic

Package: xen-hypervisor-4.0-amd64 Version: 4.0.0-1 Severity: grave The only thing I can read is: ERROR: Unable to locate IOAPIC for GSI 2 ERROR: Unable to locate IOAPIC for GSI 9 ERROR: Unable to locate IOAPIC for GSI 9 cannot read /etc/fstab: no such file or directory mounting [...] failed: no such file or directory I boot with: moltiboot [xen] module [kernel] root=[uuid or device] ro quiet

# dd if=/dev/zero of=/srv/xen/webserver.img oflag=direct bs=1M seek=4095 count=1 # dd if=/dev/zero of=/srv/xen/webserver.img oflag=direct bs=1M count=4096 root@debian:~# grub-install /dev/xvda Searching for GRUB installation directory ... found: /boot/grub The file /boot/grub/stage1 not read correctly. Darkbasic _______________________________________________ Xen-users mailing list

Distro: debian unstable Xen version: 4.0.0-2 This is the config: #HVM #still no qemu-dm in debian #kernel = "/usr/lib/xen-4.0/boot/hvmloader" #builder = ''hvm'' #memory = 2048 #name = "webserver" #vif = [''bridge=eth0''] #disk = [''tap:tapdisk:aio:/srv/xen/webserver.img,xvda,w'',''phy:/dev/cdrom,xvdb:cdrom,r'']

Hi, The call waiting tone is very annoying (you hear nothing while it plays the beep). I need callwaiting because of the queues (the phone has to ring as soon as you hangup) but I want to remove the beep on my dahdi channels, how can I do? Thanks, Niccol? -- http://www.linuxsystems.it

Il 27/04/2011 14:37, Ian Campbell ha scritto: > Which specific revision of qemu-xen-4.1 are you using? I'm using a tarball from http://bits.xensource.com/oss-xen/release/4.1.0/xen-4.1.0.tar.gz It seems Thomas used the tools/ioemu-qemu-xen subdirectory as source for xen-qemu-dm. At a first glance I didn't notice debian/mypatches/add-rules.patch: it adds Rules.mk from the tools

Hi, I have a Portech MV-374 GSM Gateway and I'd like to send SMS from a web page to confirm the subscriptions. How can I achieve it? Is Asterisk of any use to send SMS with the Portech? I really have no idea because I know nothing about the whole SMS thing... Thanks, Niccol? -- http://www.linuxsystems.it

I noticed it by chance while digging into the code, I think it's a great news! Darkbasic

Is there a fix for this in the works/coming for squeeze or do I have to patch the package myself? If so, how? Thanks, a grateful Debian user that hasn't patched packages yet! Steve -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/pkg-xen-devel/attachments/20101122/8433308c/attachment.htm>

Hi I'm trying to get the spa 8000 used with a fax machine using t38 passthru i have tried with 1.6.2 and 1.8.3 and is still a no go the provider i use is 012 in israel wich supports t38 (i use it with ffa) could anybody give me a clue how to get this working if it should t38pt is set to yes in sip.conf Thanks, Israel -------------- next part -------------- An HTML attachment was

Do you know if squeeze has xen support? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, I have a problem with asterisk 10.8, hints and fxs dahdi phones: if a remote peer and an fxs phone gets connected and the remote peer hangsup, then asterisk sends the "Idle" state to notify the watcher before you hangup the fxs phone! Such a way if the user forgets to hangup the fxs phone (which is a cordless for example) then the operators will keep sending calls to him

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

I am using Debian 6.0 "Squeeze", I applied that patch (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591456) to xen-common because of lack of hotplugpath.sh. network-route netdev=eth1 now does work, but vif-route gives me this error: root at xen-dom0:~# xm create /srv/xen/profiles/ca.cfg Using config file "/srv/xen/profiles/ca.cfg". Error: Device 0 (vif) could not be

I am using Debian 6.0 "Squeeze", I applied that patch (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591456) to xen-common because of lack of hotplugpath.sh. network-route netdev=eth1 now does work, but vif-route gives me this error: root at xen-dom0:~# xm create /srv/xen/profiles/ca.cfg Using config file "/srv/xen/profiles/ca.cfg". Error: Device 0 (vif) could not be

Dear R users,I'm facing a trivial problem, but I really can't solve it. I've tried a dozen of codes, but I can't get the result I want. The question is: I have a dataframe like this one [,1] [,2] [,3] [,4] [,5] [1,] 1 2 3 4 5 [2,] 2 5 5 4 9 [3,] 1 6 8 1 2 [4,] 8 6 4 1 5 made up of decimal numbers, of course. I want to

I've contacted Riello and they told me that the NetMan 204 is the new version of the Netman Plus 102 and is indeed compatible with NUT. I don't know how to update the Hardware compatibility list page, but the 204 should be added to the compatible ones. Niccolo' Il 2022-06-17 12:02 Niccol? Belli via Nut-upsuser ha scritto: > Hi, > I'm looking for a small 230V Line

I've contacted Riello and they told me that the NetMan 204 is the new version of the Netman Plus 102 and is indeed compatible with NUT. I don't know how to update the Hardware compatibility list page, but the 204 should be added to the compatible ones. Niccolo' Il 2022-06-17 12:02 Niccol? Belli via Nut-upsuser ha scritto: > Hi, > I'm looking for a small 230V Line

Hi all, I am wondering if do exist a function in R that allow me to sample or choose randomly the rows (i.e., samples) inside a given matrix. Thank you very much in advance. Cheers, -- Gian [[alternative HTML version deleted]]