similar to: Aastra phones cannot transfer calls?

> > Allen Casteran wrote: > > Anyone know what the POE draw is for the Aastra 480i phones? > > We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. > > A Cisco 3560 switch will do 15.6 watts on all 24 ports. > > Just trying to find out if we need that much power. > Drew wrote: > According to Aastra tech support, 5 watts

Anyone know what the POE draw is for the Aastra 480i phones? We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. A Cisco 3560 switch will do 15.6 watts on all 24 ports. Just trying to find out if we need that much power. Can't seem to find any info on the Aastra site. Comments?

Does anyone have success in upgrading Aastra/Sayson 480i CT firmware? All I get, no matter what I've tried is "Unable to upgrade firmware". tftpd is working because the dialplan freshens, and I have aastra.cfg whatevermacaddressfile.cfg and firmware.st in /tftpboot Am I missing something stupid? Is there another way to upgrade it? Chris Coulthurst chris@shuksan.com

Getting "no service" display on aastra 480i. Sip debug shows an "unathorized" blub when the aastra tries to register. Some reading indicates that 1.4 firmware wants aastra.cfg and mac.cfg in /tftpboot/. There are none. Anyone have basic config files? Or can point me to a good link? All links I have tried, that purport to have config files, are either dead or error out.

I need to provide a 80 people office with VOIP. I want to commit to one vendor Polycom or Aastra. Price of the phones is not a factor in the decision. The quality of the phones is the factor. Some of the features that I am evaluating on are: (arranged in order of priority) 1. Sound quality 2. complete product line with conference phone and receptionist phone (not on Aastra) 3. cordless (not on

Hello All, I have a need for a wireless solution and have been looking at the Aastra 57i CT phone that have the wireless handset with them. Aastra says they will cover "up to 300,000 square feet". I am finding this hard to accept. I was also wondering about the "secure WDCT cordless technology" Could this be a form of DECT? Any one using these that can shed some lite?

Hi, We have a few Aastra 480ci phones and we've noticed that in order to get the phone to receive a call, qualify must be = no. Apparently the Aastras do not respond to the qualify message (or respond in a way Asterisk doesn't understand) and Asterisk thinks the phone is unreachable. However, this now prevents MWI from working properly on the phones. Does anyone know how to get MWI

Hi Folks, Looking for feedback on the cordless phones with the Aastra 480i CT handset. Is voice quality comparable to standard consumer residential 2.4GHz cordless phones in the US$30 - $50 price range, or better/worse? How about handset and speakerphone quality for the main phone? Seems like there have been various big issues with firmware in past, but is it pretty stable now? Thanks,

Does anyone know if it is possible to upload a common directory to all Aastra phones (480i, 9133)? Is there someting equivalent to the way Polycom phones do it? -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V. Tel: +52-55-91169161 Ext 2001

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com

Sorry for being a little off topic, but I'mconsidering a few new phones for my Asterisk installation. I have a mix of Polycom 500/600s and an Aastra 480i CT. I'm considering adding a couple of Aastra 57i or 57i CT. Does anyone here have experience with the 480i CT and the newer 57i CT? I'm curious as to the real differences. Thanks, Michael Graves Sr Product Specialist Pixel Power

Just found out my maintanence agreement with fonality does not cover phones over a year old. So, of course, they don't repaird phones, only replace them. Very worldly of them... Anyone know where I can get an Aastra 480i repaired? The phone works on speakerphone, but when you lift the receiver offthe hook, the phone does not engage. There is something wrong with the "hook". The

I have this Aastra 480i phone, and you can set the TFTP server IP address manually in the phone, but there should be a way to have it find the TFTP server information via DHCP. Does anyone know if this is possible, and if so, what is the attribute I have to set on my DHCP server? Thanks! __ Dana Olson Disclaimer: The information transmitted in this message is intended only for the person or

I just bought an Aastra 480i CT for a client who needed cordless capabilities in their office. I'm trying to set up the base station and cordless handset in my office first. I'm able to connect the phone to my Asterisk box and make outgoing calls from either the base station or the handset - to extensions within my office as well as numbers outside the network. But I can't

After upgrading to 1.8.3.2 today, I notice that my Aastra 480i SIP phones no longer initiate hold music when a call is placed on hold. I seem to be having the same issue as the person here: http://forums.digium.com/viewtopic.php?f=1&t=77553 Has anyone else run into this issue? -- Anthony - http://messinet.com - http://messinet.com/~amessina/gallery 8F89 5E72 8DF0 BCF0 10BE 9967 92DC 35DC

Are the cordless phones on the 480i CT from Aastra registered independently in Asterisk? Such that if I have 5 of the cordless phones hooked up, each one is it's own "extension?" ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended

I have read the user reports on the Aastra 480i SIP phones, but the last report is from October, and the advice was to stay away from these units. I was looking at the cisco 79XX series or the SPA-941's, but they don't have backlit displays. I also like POE support so I don't have to run multiple wires to the phones and makes for a neater look. I dislike the looks of the SNOM

Fellow list members, I have run into an issue where I encounter a delay at the beginning of a phone conversation when I make outgoing calls through Asterisk with an Aastra 9133i hardphone. This is most noticable when I call a voicemail system with the Aasta and then with a land line or other VoIP phone. The first word or two of the voicemail message is generally cut off. According to

Hi, Some odd behaviour here. A friend and I were talking tonight, and it seems we have both seen the same problem. We are both using aastra phones (I am using 9113is). We have a connection to and from providers via SIP and IAX. When I place a call on the local hold of the phone, and then pick them back up I can hear them, but they can not hear me. However, if I park the call,

Hello, I have some Aastra 9112i's in production that almost function flawlessly. The problem I'm having is when a caller is put on hold they do not hear hold music. If they are on hold for too long (~ a minute?) they are hung up on. All other phones including Aastra 480i and Sipura/Linksys ATAs all seem to be working fine. Is this a quirk anyone else has experienced? Any