similar to: Kernel Panic When restarting the server

Thanks Zeeshan, SAngoma told me that the asterisk problem is unrelated to wanpipe drivers, they told me to reinstall asterisk again But, i still having doubts about the problem :( Thanks in advance > > Message: 10 > Date: Thu, 18 Mar 2010 00:21:06 -0400 > From: Zeeshan Zakaria <zishanov at gmail.com> > Subject: Re: [asterisk-users] Asterisk DIES with no trace. PLEASE >

Hello my friends, I want to make upgrades for all my software, currently i have the following versions: Asterisk 1.4.21.2 Zaptel Version: 1.4.11 WANPIPE Release: 3.4.7 libpri version: 1.4.5 I want to make upgrade for the last version of Asterisk 1.4, the last version of Zaptel (dahdi will be nice!), the newest libpri version and wanpipe What should i do? this is a production server and i

Hi there, we have a problem with dahdi and overlapdial. We are running an E1 in Germany and are in need of overlapdial. The E1 is connected to a Sangoma A101. As soon as overlapdial is set to "yes" we have problems with incoming audio on the dahdi channels. When set to "no" all audio is fine. Basically we can choose between being able to receive calls or to place calls

Hello, I have a Sangoma A200 analog card with 2 FXO ports. It's working well with asterisk 1.4.22 and Zaptel. I decided to upgrade to asterisk 1.6/dahdi. I compiled and installed, dahdi-linux-2.1.0.4 dahdi-tools-2.1.0.2 libpri-1.4.10 wanpipe-3.4.1 asterisk 1.6.1.1 My analog card is recognized in dahdi_hardware. However, asterisk cannot compile chan_dahdi.so. I've tried passing

Hello my friends We are having seriously problems with our asterisk server, our versions are as follows: WANPIPE Release: 3.4.7 Asterisk 1.4.21.2 Zaptel Version: 1.4.11 libpri version: 1.4.10.2 The symptoms are very weird, the CLI stop working suddenly, a core show channels shows MANY channels FREEZED, the incoming and outgoing calls stop working, the internal calls stop working, in resume we

Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ FXS Analog AFT card set up properly. The main issue is that the card has four ports and as far as I can tell Asterisk is only seeing two. On the two that it recognizes the "Green" FXS ports are not green, they just are not lit. The "RED" FXO ports are indeed red, but from what I have read your not

Hi Team Can someone advice me on how i can lower the load average on my asterisk server? dahdi-linux-2.1.0.4 dahdi-tools-2.1.0.2 libpri-1.4.10.1 asterisk-1.4.25.1 2 X TE412P Digium cards on ISDN PRI Im using the system as an IVR without any transcoding or bridging ************************************** top - 10:27:57 up 199 days, 5:18, 2 users, load average: 67.75, 62.55, 55.75 Tasks: 149

Has anyone seen something like this before. Randomly, on longish calls, the local side of the call audio goes dead. Meaning remote caller can hear us but we cannot hear the remote person? Linux voip 2.6.18-128.1.6.el5 #1 SMP Wed Apr 1 09:10:25 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux Asterisk 1.4.24.1, Copyright (C) 1999 - 2008 Digium, Inc. and others. WANPIPE Release: 3.4.1 Wanpipe Config:

Hello my friends, I want to make fax work in the following scenario: My versions are: Asterisk 1.4.21.2 WANPIPE Release: 3.4.7 Zaptel Version: 1.4.11 libpri version: 1.4.5 Digium Card TDM 410P The E1 pri is connected to our Sangoma A102DE, we also have a SIP Mediant Audiocodes 1000 where we have some fax machines connected to fxs ports, what we need is to make fax machines through mediant

[2009-05-27 02:06:16.294] WARNING[6971] chan_dahdi.c: No D-channels available! Using Primary channel 24 as D-channel anyway! [2009-05-27 02:06:16.295] VERBOSE[6971] logger.c: [2009-05-27 02:06:16.295] == Primary D-Channel on span 1 up [2009-05-27 02:06:16.301] ERROR[6971] chan_dahdi.c: !! Got a UA, but i'm in state 7 I noticed the above error many days after this at around 2AM. This

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! Days ago I bought a OpenVox A400P card with a port FXS and another FXO that I am testing with my Asterisk installation in my house. I'm using Asterisk 1.4.24.1 with DAHDI Linux 2.1.0.4 and DAHDI Tools 2.1.0.2 on Debian GNU/Linux Lenny. I was reading "The future of telephony" and this [1] document looking for information about

Dear R-users and expeRts, can anyone provide me (and others as well, of course) with reference of companies, scientific labs and/or schools where R is being used? Or does some (even unofficial) list of comanies etc. where R is being used exist? I tried to find such an information on R's homepage and on a FAQ page, but unsuccesfully. (Of course, searching through this r-help conference one

LD [M] /root/wanpipe/patches/kdrivers/wanec/wanec.o Building modules, stage 2. MODPOST *** Warning: "register_wanec_iface" [/root/wanpipe/patches/kdrivers/wanec/wanec.ko] undefined! *** Warning: "unregister_wanec_iface" [/root/wanpipe/patches/kdrivers/wanec/wanec.ko] undefined! CC /root/wanpipe/patches/kdrivers/wanec/wanec.mod.o LD [M]

Hello, We are having issues with a NEW Sangoma A108D: -- Executing [691918892 at pbx1:1] Dial("SIP/xtravoip200-009d24b0", "DAHDI/g0/691918892|30|m") in new stack [Oct 1 10:04:43] WARNING[14171]: channel.c:3170 ast_request: No translator path exists for channel type DAHDI (native 76) to 256 [Oct 1 10:04:43] WARNING[14171]: app_dial.c:1237 dial_exec_full: Unable to create

Hi all, as good? I try to install asterisk-1.2.14, zaptel-1.2.12,libpri-1.2.4,addons-1.2.5 , sounds-1.2.1 and wanpipe-2.3.4-3 and hwec-utils-beta4-2.3.4 But it is not compiling drivers of the Sangoma, why udev's for board in "/dev/zap"(1-31, channel,ctl,pseudo,timer) is not created. But when I install a board TE110P Digium, udev's is created and asterisk functions perfectly. : )

Hey! I am installing Sangoma A102D wanpipe driver and i got following error. what is this ? why dir isn't there ? wanpipe-3.5.16 # make dahdi DAHDI_DIR=/usr/src/dahdi wanpipe-3.5.16 # make install ....Send .... .... Installing Wanpipe Firmware update utility in /etc/wanpipe/util/wan_aftup install -D wan_aftup /usr/sbin/wan_aftup install -d /etc/wanpipe/util/wan_aftup/scripts install:

Newest wanpipe (3.3.16) beta drivers do not compile against dahdi-linux 2.2.0-rc2 which is what you get when you get dahdi-linux-current.tar.gz Anyone have a workaround or patch? Error below ==================== Building modules, stage 2. MODPOST CC /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.mod.o LD [M] /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.ko make[1]:

Hi all, I have tried to install Wanpipe 7.0.20 in a fresh-installed Debian 8.5 (Jessie) server, but when I reach to the point where I have to enter the Linux Headers directory *(installed in default with ?apt-get install linux-headers-$(uname -r)?)*, I get an error, the package refuses to compile and installation aborts. If I try the same process with Debian 7 (Wheezy), installation works just

Trying to install wanpipe 3.5.18. No errors during compile. But when I reach the point where wanpipe and dahdi_cfg is started, I encountered an error. Starting WAN Router... Loading WAN drivers: wanpipe done. Starting up device: wanpipe1 wanconfig: WAN device wanpipe1 driver load failed !! : ioctl(wanpipe1,ROUTER_SETUP) failed: : 22 - Invalid

Hi, I'm trying to install asterisk(v1.2.22) with FreepBX(v2.2.3) with a 4-Port FXO Sangoma card A200. I'm using Fedora 7 (x86_64) kernel version 2.6.22.1-27.fc7, but i'm having these errors: $ ztcfg -vvvv Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS