similar to: [X100P+Dahdi 2.3.0] Couple of questions

Hello, I'm looking for a dirt cheap solution for SOHO use to handle at most a couple of POTS lines, and I notice that X10?P cards go for $15 on eBay as opposed to $90 for an OpenVox card or over $200 for a Sangoma. I have a couple of questions about those cheap FXO cards: 1. Are they all glorified softmodems, ie. none has an on-board CPU or DSP and outsources all processing to the

Hello I'm trying to install Dahdi through source code on a Fedora 13 host to use an OpenVox PCI card with a single FXO port, but dahdi_cfg -vv isn't happy. 1. After successfully running "make all; make install; make config", I edited /etc/dahdi/system.conf thusly: loadzone=fr defaultzone=fr fxsks=1 2. Then ran "dahdi_cfg -vv" which says: ------------- DAHDI Tools

So, tweaking configs, rebuilding this and that... restarting, twiddling, it works (yeah!), but fails on re-boot to work at all. Consistently, though. I believe it comes down to this: I can call out only *after* I've received a call. So, cold boot. Then: modprobe dahdi modprobe wctc4xxp modprobe wcfxo dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.1.0.3

The Asterisk Development Team is pleased to announce the release of DAHDI-Linux and DAHDI-Tools version 2.3.0. DAHDI-Linux 2.3.0, DAHDI-Tools 2.3.0, and DAHDI-Linux-Complete are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete In

The Asterisk Development Team is pleased to announce the release of DAHDI-Linux and DAHDI-Tools version 2.3.0. DAHDI-Linux 2.3.0, DAHDI-Tools 2.3.0, and DAHDI-Linux-Complete are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete In

Hello! I've been following this list for several weeks now and would like to purchase some hardware for a VOIP/ voice-mail solution. This card appears strikingly similar to a modem. Is it? Is there a product to bring in more than one POTS line short of a full T1? It just seems silly that the technology hasn't advanced any further than to have a single line per card. Any thought

Hello I was editing files manually, and noticed that if I include the familiar "fxsks=1" in /etc/dahdi/system.conf, Dahdi fails loading: ===================== # cat /etc/dahdi/system.conf loadzone = fr defaultzone = fr fxsks=1 ===================== # /etc/init.d/dahdi start Loading DAHDI hardware modules: wctdm: [ OK ] /usr/share/dahdi/waitfor_xpds: Missing

I have an ubuntu 8.10 machine. Linux 2.6.27-14-generic i want to configure a x100p card an use it with asterisk, so i download, compile and install: asterisk-1.4.24 dahdi-linux-2.1.0.4 dahdi-tools-2.1.0.2 libpri-1.4.9 i try almost everything i found on the net but without success: if i run lspci: 04:06.0 Communication controller: Motorola Wildcard X100P when i run dahdi_hardware appears this:

Hello I need Asterisk (1.4.39.2) to simulate a flash hook (ie. hitting the "R" key on European handsets) so I can put a call on hold, dial a second number, and set up a conference call. By default, linux/include/dahdi/kernel.h sets the flashtime to 750ms, which appears to be too long for European telcos, as they seem to expect a line cut of about 100ms. After editing the

Hello fellow * users, I've been experimenting like a madman lately with asterisk, and I just love it. Just reading this list and asking a few questions here and there has helped me out a great amount. Not to mention the excellent resource we call the Wiki. I have searched for answers to the two following questions, but couldn't find anything, it is entirely possible i was just

Hi, I have problem with X100P clone card.I can not force it to work under Asterisk 1.4.27.1 and DAHDI Version: 2.2.0.2. I looked over and over on configuration and could not see any mistakes. Here are relevant configuration files. /etc/dahdi/system.conf > fxsks=1 > echocanceller=mg2,1 > loadzone = hu > defaultzone = hu > dahdi_tool > OK Wildcard X100P

Hi list, I install dahdi-linux successfully with the module of oslec for the echo, but when I specify it in the system.conf the echo canceller oslec it shows me errors: DAHDI_ATTACH_ECHOCAN failed on channel 4: Invalid argument (22) I see that the echo cancellers is supported: mg2, kb1, sec2, and sec because oslec is not supported?, but he has support to compile it with dahdi_linux! best

Hello Unless I overlooked it, the "Asterisk Reference Information Version 1.6.1.6" at www.asterisk.org/docs doesn't include instruction on how to start Dahdi when used to drive a TDP PCI card (OpenVox A400P with a single FXO module www.openvox.cn/products/show.php?itemid=20&lang=2). I'd like to know... 1. How to start Dahdi manually. Is this the right way? modprobe

Hello No matter if I use the entry-level OpenVox A400 with a single FXO module or the most-often-garbage card from ww.x100p.com, I get the following error after just adding this card to Mini-ITX with a single PCI slot (OS = CentOS 5.4): ============ # lspci -v 03:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device b100:0003

Tengo en una maquia ubuntu 8.10 el kernel es Linux 2.6.27-14-generic Quiero configurar una tarjeta x100p i usarla con asterisk, asi que descague compile e instale lo siguiente: asterisk-1.4.24 dahdi-linux-2.1.0.4 dahdi-tools-2.1.0.2 libpri-1.4.9 Sin embargo no logro configurar la tarjeta con exito, ya probe casi? todo. Esto aparece si ejecuto lspci: 04:06.0 Communication controller: Motorola

Hi All, Sorry if this has been around a millions times.. I have been off this list for a few months now.. I have installed the latest asterisknow (upgraded asterisk to 1.6 as well) and I am having a hard time getting my X100P and TDM400P working.. Its all new to me with dahdi because my old server is still running Asterisk 1.0.2 so there have been lost of changes.. Can someone point me in

Sorry for the delay; I have been waiting for SourceForge to come back on-line. lvqcl wrote: > 1) It seems that some programs (eac3to) write the value of > WAVEFORMATEXTENSIBLE_CHANNEL_MASK tag with uppercase 'x' (e.g. 0X3) > (see <http://forum.doom9.org/showthread.php?p=1728852#post1728852>) > > Also, from MediaInfo changelog

Hi all, Really excited to be using Asterisk and learning about VOIP and PBX's. I'm a complete beginner at telephony but have built and installed Asterisk 1.4.5 and read several of the Asterisk books online and have successfully connected to FWD with IAX2 and to GIZMO using SIP. Just purchased a Motorola Wildcard X100P and installed it into a clone PC running Fedora Core 6. Analog

> > > > > Well there are some products which may fit your bill, but will take more > of your bills: > > > > www.voicetronix.com sells a 4 port PCI FXO at about AU$1000, a 6 port > > I think their 4 port card is FXS, can it be FXO as well? > -Matt I'm sorry, I pick a bad week to stop sniffing glue, you are entirely correct. Aloha, Matt

hi folks, i hope that i will get some help about this issue,so my configuration is : X100P card ,with FXO port ,the problem is that when i send a call using Originate,every thing goes well but what i realy need is to know how can i detect the status of this channel till the called person hung up or pick up the phone or may be busy .so how can i know that those dahdi show status and the like