Tengo en una maquia ubuntu 8.10 el kernel es Linux 2.6.27-14-generic Quiero configurar una tarjeta x100p i usarla con asterisk, asi que descague compile e instale lo siguiente: asterisk-1.4.24 dahdi-linux-2.1.0.4 dahdi-tools-2.1.0.2 libpri-1.4.9 Sin embargo no logro configurar la tarjeta con exito, ya probe casi? todo. Esto aparece si ejecuto lspci: 04:06.0 Communication controller: Motorola Wildcard X100P dahdi_hardware me muestra: pci:0000:04:06.0???? wcfxo-?????? 1057:5608 Wildcard X100P dahdi_cfg -v : DAHDI Tools Version - 2.1.0.2 DAHDI Version: 2.1.0.4 Echo Canceller(s): Configuration ===================== 0 channels to configure. dahdi_scan: [1] active=yes alarms=UNCONFIGURED description=DAHDI_DUMMY/1 (source: HRtimer) 1 name=DAHDI_DUMMY/1 manufacturerdevicetype=DAHDI Dummy Timing locationbasechan=1 totchans=0 irq=0 Nada parece funcionar y realmente no se donde esta el error... alguna idea?
nos muestran la configuraci?n de sus l?neas de /etc/dahdi/system.conf y /etc/asterisk/chan/dahdi.conf 2009/4/2 Manolet Gmail <manolet at gmail.com>> Tengo en una maquia ubuntu 8.10 el kernel es Linux 2.6.27-14-generic > > Quiero configurar una tarjeta x100p i usarla con asterisk, asi que > descague compile e instale lo siguiente: > > asterisk-1.4.24 > dahdi-linux-2.1.0.4 > dahdi-tools-2.1.0.2 > libpri-1.4.9 > > Sin embargo no logro configurar la tarjeta con exito, ya probe casi todo. > > Esto aparece si ejecuto lspci: > 04:06.0 Communication controller: Motorola Wildcard X100P > > dahdi_hardware me muestra: > pci:0000:04:06.0 wcfxo- 1057:5608 Wildcard X100P > > dahdi_cfg -v : > DAHDI Tools Version - 2.1.0.2 > > DAHDI Version: 2.1.0.4 > Echo Canceller(s): > Configuration > =====================> > > 0 channels to configure. > > dahdi_scan: > [1] > active=yes > alarms=UNCONFIGURED > description=DAHDI_DUMMY/1 (source: HRtimer) 1 > name=DAHDI_DUMMY/1 > manufacturer> devicetype=DAHDI Dummy Timing > location> basechan=1 > totchans=0 > irq=0 > > Nada parece funcionar y realmente no se donde esta el error... alguna idea? > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090402/5fc9263c/attachment.htm
system.conf: # Global data loadzone = us defaultzone = us el archivo /etc/asterisk/chan/dahdi.conf no existe, estoy usando asterisk 1.2 de todas maneras como dije ztcfg -v tampoco muestra la tarjeta, asi que de ninguna forma la va a ver asterisk, si hago en asterisk dahdi show channels no aparece nada. 2009/4/2 Brandon B. <brandon at brellsystems.com>:> nos muestran la configuraci?n de sus l?neas de /etc/dahdi/system.conf y > /etc/asterisk/chan/dahdi.conf > > > > 2009/4/2 Manolet Gmail <manolet at gmail.com> >> >> Tengo en una maquia ubuntu 8.10 el kernel es Linux 2.6.27-14-generic >> >> Quiero configurar una tarjeta x100p i usarla con asterisk, asi que >> descague compile e instale lo siguiente: >> >> asterisk-1.4.24 >> dahdi-linux-2.1.0.4 >> dahdi-tools-2.1.0.2 >> libpri-1.4.9 >> >> Sin embargo no logro configurar la tarjeta con exito, ya probe casi? todo. >> >> Esto aparece si ejecuto lspci: >> 04:06.0 Communication controller: Motorola Wildcard X100P >> >> dahdi_hardware me muestra: >> pci:0000:04:06.0???? wcfxo-?????? 1057:5608 Wildcard X100P >> >> dahdi_cfg -v : >> DAHDI Tools Version - 2.1.0.2 >> >> DAHDI Version: 2.1.0.4 >> Echo Canceller(s): >> Configuration >> =====================>> >> >> 0 channels to configure. >> >> dahdi_scan: >> [1] >> active=yes >> alarms=UNCONFIGURED >> description=DAHDI_DUMMY/1 (source: HRtimer) 1 >> name=DAHDI_DUMMY/1 >> manufacturer>> devicetype=DAHDI Dummy Timing >> location>> basechan=1 >> totchans=0 >> irq=0 >> >> Nada parece funcionar y realmente no se donde esta el error... alguna >> idea? >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> ? http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > ? http://lists.digium.com/mailman/listinfo/asterisk-users >
Follow instructions from the following line to configure Asterisk 1.2 with zaptel drivers for the X100P. If you are using dahdi-linux drivers instead of zaptel, then instead of zaptel.conf you need to have a properly configured /etc/dahdi/system.conf and instead of /etc/asterisk/zapata.conf use this file instead /etc/asterisk/chan_dahdi.conf. http://users.telenet.be/Asterisk-PBX/InstallWildcard.htm Since it sounds like you have not used Asterisk before, you should read "Asterisk: the future of telephony <http://astbook.asteriskdocs.org/> and look through the pages at voip-info.org to get started. 2009/4/2 Manolet Gmail <manolet at gmail.com>> system.conf: > > # Global data > > loadzone = us > defaultzone = us > > el archivo /etc/asterisk/chan/dahdi.conf no existe, estoy usando > asterisk 1.2 de todas maneras como dije ztcfg -v tampoco muestra la > tarjeta, asi que de ninguna forma la va a ver asterisk, si hago en > asterisk dahdi show channels no aparece nada. > > 2009/4/2 Brandon B. <brandon at brellsystems.com>: > > nos muestran la configuraci?n de sus l?neas de /etc/dahdi/system.conf y > > /etc/asterisk/chan/dahdi.conf > > > > > > > > 2009/4/2 Manolet Gmail <manolet at gmail.com> > >> > >> Tengo en una maquia ubuntu 8.10 el kernel es Linux 2.6.27-14-generic > >> > >> Quiero configurar una tarjeta x100p i usarla con asterisk, asi que > >> descague compile e instale lo siguiente: > >> > >> asterisk-1.4.24 > >> dahdi-linux-2.1.0.4 > >> dahdi-tools-2.1.0.2 > >> libpri-1.4.9 > >> > >> Sin embargo no logro configurar la tarjeta con exito, ya probe casi > todo. > >> > >> Esto aparece si ejecuto lspci: > >> 04:06.0 Communication controller: Motorola Wildcard X100P > >> > >> dahdi_hardware me muestra: > >> pci:0000:04:06.0 wcfxo- 1057:5608 Wildcard X100P > >> > >> dahdi_cfg -v : > >> DAHDI Tools Version - 2.1.0.2 > >> > >> DAHDI Version: 2.1.0.4 > >> Echo Canceller(s): > >> Configuration > >> =====================> >> > >> > >> 0 channels to configure. > >> > >> dahdi_scan: > >> [1] > >> active=yes > >> alarms=UNCONFIGURED > >> description=DAHDI_DUMMY/1 (source: HRtimer) 1 > >> name=DAHDI_DUMMY/1 > >> manufacturer> >> devicetype=DAHDI Dummy Timing > >> location> >> basechan=1 > >> totchans=0 > >> irq=0 > >> > >> Nada parece funcionar y realmente no se donde esta el error... alguna > >> idea? > >> > >> _______________________________________________ > >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > >> > >> asterisk-users mailing list > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090402/84242dcb/attachment.htm