similar to: Asterisk Call Recording *1 Status Indication

I have setup as per the monitor example configuration on the wiki site and all works well for an extension dialing 8 then the number. However, if I dial from an AGI script the recording stops after a few seconds. I see an extra answer in the console and suspect that is the reason. Could any kind soul help me to get around this? Extensions.conf.. exten =>

I would appreciate any ideas of what I'm doing wrong on this. My dialplan calls an AGI which records a file. That works, but I'm trying to find a way to determine whether the caller pressed # to stop a recording before the maxtime expired, or if the recording ended due to reaching the max timeout. The $fx variable in the below agi excerpt always returns 0. $res =

Hello, We have an application where operators will sometimes take an incoming call from a queue, then contact an outside line, do a consultation, and finally do a SIP attended transfer to join the two parties together. We'd like to record the incoming caller's conversation with the operator and the attended part of the outgoing call, but not the unattended part, after the transfer has

Hello. Though I pressed # after I finished recording my voice, but application record() did not stop. dialplan is : exten => 0,1,Record(recordyourmessage.gsm) exten => 0,2,Playback(recordyourmessage) exten => 0,3,Hangup I don't want either silence and maxduration time. Can you help? Regards. Kim.

Hello, We've made thousands of recording on our Asterisk system, and we had one last night that ended up having a constant loud hum throughout the entire recording. None of the other recordings from last night have the hum and the caller said the conversation had no hum in it. Anyone have any ideas how the recording could've had such a loud hum when the calling parties didn't hear it?

Zac, Thanks for the input. This would cover it, however it is not stealth. In some cases, you may want it to be stealth. Again, my state allows me to do this, but some states do not. I've done a little searching and could not find an answer. Basically, to simplify the question: When is it legal to record interstate calls without giving notice, when the recording party is in a one-party

Hi, I'd like to trigger call recording during call. Do I have any keys that can be pressed during call ? I've tried this, but doesn't start anything ( I guess that "a" is active only during voicemail ?): exten => a,1,DBget(temp=Record/${TIMESTAMP}_${UNIQUEID}_${CALLERID}) ; Already recording ? if not goto 102 exten =>

Does anybody have useful tips on creating good quality recordings for use with prompts in asterisk? I'm interested in hearing input on hardware (mics, dats, sound cards, etc) and software (recording software, dsp) as well as recording techniques. Jerimiah Tularosa Communications

Hi List, Have an odd problem with the one-touch record on asterisk 1.2.11. All works ok, however one of our users today discovered if he is a bit slow hitting the 1 key after he presses *, the call seems to stay connected but its almost like it is muted. Haven't figured out the delay yet but it seems to be if the 1 is not pressed within 1-2 secs this occurs. Any suggestions? I tried

Hello, At my workplace I have exact UPS config as stated in the subject (APC MGE Galaxy 5500 + AP9635CH). I have it set up to work with snmp-ups NUT driver. Despite many readings from *upsc* command I am not receiving "On Line Status" (ups.status OL) nor "On Battery Status" (ups.status OB) and therefore I can't get my systems to shutdown during a power outage event.

Hi Steve, What language is that please? We're using Perl and so far I haven't found an equivalent there. Thanks for your help. On Fri, 7 Jun 2019 at 12:10, Steve Edwards <asterisk.org at sedwards.com> wrote: > On Fri, 7 Jun 2019, David Cunningham wrote: > > > We have a need to record audio and allow the user to press any DTMF key > > to end the recording.

Hi, Any suggestions to below problem? Thanks -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jamie Heckford Sent: 17 October 2006 21:48 To: asterisk-users@lists.digium.com Subject: [asterisk-users] FW: Why does One-Touch record mute/disconnect callif not dialed quick enough? Hi List, Have an odd problem

mateuszx via Nut-upsdev <nut-upsdev at alioth-lists.debian.net> writes: > At my workplace I have exact UPS config as stated in the subject (APC MGE > Galaxy 5500 + AP9635CH). > I have it set up to work with snmp-ups NUT driver. > Despite many readings from *upsc* command I am not receiving "On Line > Status" (ups.status OL) nor "On Battery Status"

Hello, At my workplace I have exact UPS config as stated in the subject (APC MGE Galaxy 5500 + AP9635CH). I have it set up to work with snmp-ups NUT driver. Despite many readings from *upsc* command I am not receiving "On Line Status" (ups.status OL) nor "On Battery Status" (ups.status OB) and therefore I can't get my systems to shutdown during a power outage event.

Hello, my Atlantis UPS (model on "subject" line) fails to cycle off the outlet power after a power failure on the mains followed by an automatic shutdown of the computer. The UPS simply remains always on, preventing the computer from restarting. ** Setup: ** Nut version 2.7.2 Nut driver blazer_usb Linux 4.1.1 The config files are pretty default; the peculiar customization is

Hi All, I get very strange UPS problem from RspberryPI mode B (both version 2 and 3). Here is our environment: OS: Raspbian 8.0, Ubuntu 16.04 and Ubuntu 14.04 Platform: RaspberryPi Mode B version 2 and version 3 NUT: tested version 2.6.3, 2.7.1 and 2.7.2 (from

Also, which version of NUT is involved? There were recently PRs (merged to master-branch, eventually will be in 2.8.1) about more SNMP-UPS support including APCs e.g. 1674, 1679, 1113 (should be in 2.8.0)... Many distros still ship 2.7.4... Jim On Tue, Feb 28, 2023, 00:57 Greg Troxel <gdt at lexort.com> wrote: > mateuszx via Nut-upsdev <nut-upsdev at alioth-lists.debian.net>

Hi, I want to hide some of my html in my view before toggling. In my css I tried setting the display:none; but then when I would run my toggle function it wouldn''t toggle. Is there an easy solution out there besides having to render javascript everytime to hide this html before toggling it? -- Posted via http://www.ruby-forum.com/.

Hi All, I get very strange UPS problem from RspberryPI mode B (both version 2 and 3). Here is our environment: OS: Ubuntu 16.04 and Ubuntu 14.04 Platform: RaspberryPi Mode B version 2 and version 3 NUT: tested version 2.6.3, 2.7.1 and 2.7.2 (from

Hi All, I get very strange UPS problem from RspberryPI mode B (both version 2 and 3). Here is our environment: OS: Raspbian 8.0, Ubuntu 16.04 and Ubuntu 14.04 Platform: RaspberryPi Mode B version 2 and version 3 NUT: tested version 2.6.3, 2.7.1 and 2.7.2 (from ports.ubuntu.com) UPS: APC Smart-UPS 3000 RM and APC Smart-UPS 1500 RM Cable: