similar to: Split E1 ISDN service for another device.

Hello, I am trying to install my E1 card to make a conection with an Ericsson MD-110 PBX. I installed dahdi drivers as: dahdi_hardware pci:0000:04:08.0 wcte12xp- d161:8000 Wildcard TE121 ran dahdi_genconf and it created all my e1 ports. On the other side i also configured the pbx to communicate with TE121. On ericsson side, i have no error messages. On asterisk side, no error messages. But

Hello! I want to use TE121 for E1 data link to cisco. Really only for tests now. So I wrote: span = 1,1,0,ccs,hdb3,crc4 #span=1,1,0,esf,b8zs nethdlc=1-31:hdlc0 may be first line is wrong, problem is somewhere else anyway. Just because I get: # dahdi_cfg DAHDI_CHANCONFIG failed on channel 1: Function not implemented (38) This is centos 6.4 box with dahdi 2.7.0.1. Could you tell me is it

Hi All, I'm trying to identify a new server as a replacement for what our customer actually has (DELL PowerEdge 860). The server will mount the Digium board TE121, we already have, with echo cancel onboard. I need to know if someone could suggest a new server that's compatible with this board. With "compatible" I mean that's not having any problem like IRQ sharing, IRQ miss

Dear asterisk users, We want setup TE121 digium board: Model: Digium TE121: VoiceBus technology allows the TE121 to use an industry standard bus-mastering PCI Express interface. http://www.digium.com/en/products/digital/te121.php My platform Server: HP Proliant 150 G5 OS: UBUNTU x86_64 GNU/Linux Asterisk: 1.4.21.2 zaptel: SVN-branch-1.4-r4662M When we enable zaptel driver for TE121, the

Hi I have problem with TE121 Digium card. I connected it to modem keymile Music 200 (provided by telco) but I can see 2 red lights on modem (both bellow words rx) and my card is red too. I tried to make experiment and made loopback (pins 1 4 , 2 5) and put it in card and card become green (I hope that is sign card is ok) but on CLI i can see following error message WARNING: We think we are cpe but

What's the difference between the TE121 and TE122. I read the description on Digium's site and it isn't clear to me. Best regards, -- Guilherme Loch G?es Visite nossa loja virtual: http://www.shopvoip.com.br Not?cias e F?rum sobre VoIP com software livre: http://www.asteriskexperts.com.br -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi fellow asterisk users, I am running Asterisk 1.4.29 with an Digium TE121 card (wcte12xp kernel module) an approx. 100 snom320. The whole installation is running without issues since 5 months. Without having changed anything on the asterisk server for at least 2 months, i noticed "clicking sounds" at external calls over the PRI. Asterisk constantly throws the following messages: ...

Hi list! I am installing an * box that will be installed on a site with KPN BRI ISDN in The Netherlands. I am using bristuff fron Junghanns. Does anybody know the correct settings for this? I will not have internet access there which makes it harder to google around on location. switchtype = euroisdn is pretty obvious but what about these settings: signalling = bri_cpe_ptmp ; p2p TE mode

I am running Asterisk 1.16.2.13, dahdi 2.4.0 and libpri 1.4.11.4 on an HP ML110 G6 using Ubuntu Linux 10.04 LTS. I have two Digium TE121 single T1 port cards and a Digium AEX800 8-port FXS card. All PCI Express cards. Co-workers are hearing hissing sounds on some calls, and I am getting IRQ errors when running "dahdi show status". I see that sharing IRQs for Digium cards isn't

Hi, I am trying to fix a Asterisk setup with buggy (POTS) Fax machines. The setup consists of the following components: - A Digium TE121 for connectiong to E1 ISDN - Debian box with Asterisk 1.4 - Grandstream GXW-4008 SIP ATA to which the Fax machines connect I am aware of the problems with this type of ISDN <-> Asterisk <-> SIP ATA <-> Fax machine installations, e.G.

Hi All, I have a TE121P card installed and since connected it to the PRI I keep getting the Current Alarm as continually changing from Blue Alarm/Recovering and Recovering. The config I have is: /etc/dahdi/system.conf bchan=1-15,17-31 dchan=16 echocanceller=mg2,1-15,17-31 loadzone = cn defaultzone = cn /etc/asterisk/chan_dahdi.cfg [channels] Context=telco

This is my first time setting up Asterisk in production and we are buying the Digium TE121-card for use with an ISDN-30 connection. We are considering buying a Fujitsu-Siemens Primergy TX200 S4 - http://www.fujitsu-siemens.com/products/standard_servers/tower/primergy_tx200s4.html - for handling the calls. Quad-Core Xeon, 2.5 GHz / 2 x 6 MB / 1333 Mhz. 2 GB RAM, 3.5" SATA II discs. I know this

Hello All I am looking for the cable I need to create to connect a TE121 card with a TN2464BP card (AVAYA ISDN Card), please let me know if someone have the information about this cable, my asterisk CLI show this: pri show span 1 Status: In Alarm, Down, Active And the card is in red, so I am thinking the problem is the card. Any idea??? Thanks John Teleperformance values:

Hi list, I'm trying to setup an asterisk 1.8.0 with MFC/R2, but I'm having these error messages loading chan_dahdi: > module load chan_dahdi.so ERROR[9241]: chan_dahdi.c:11848 mkintf: Signalling requested on channel 1 is MFC/R2 but line is in ISDN PRI signalling ERROR[9241]: chan_dahdi.c:16180 build_channels: Unable to register channel '1-15' I got the config in

Hello everyone, I want to connect a fax to an FXS port (TDM420P). For testing purposes, I connected an analogue phone to it first. However, when I pick it up, I cannot hear anything at all. The power cable is plugged into the card, the port is configured to use fxo-signalling. Also, immediate=no. Here's the files: /etc/zaptel.conf: # Autogenerated by /usr/sbin/genzaptelconf -- do not hand

Hi Asterisk Users, We've been experiencing some tough time regarding a new Asterisk installation connected to the PSTN via an ISDN PRI with a Digium TE121 with the optional VPMADT032 echo cancellation module. For now, I'll focus on something very specific which is summarized on this email's subject. However, here are some general facts for the context: - System pbxfri went

Hi I am trying to deploy freeswitch with Digium TE121 card for my office setup, but it is continuously showing Signaling is up and channels are down except D channel. Our Architecture is like We have freeswitch installed with libpri1.4 and Dahdi. I am from India and here we are having E1 trunk. Dahdi Configuration is cat system.conf # Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 7

Hello I am going to have a setup like this: One Asterisk-box with two TE121-cards, and an ISDN-30 line. On the other hand, I also have another box with VoiceGuide and Dialogic. As a temporary migration-solution i would like to redirect some of the ISDN30 channels from the Asterisk to the Dialogic-box. How would I do this?

Hello I have recently configured TDM400P with four FXO ports. My next requirement is to configure for E1 line. which contain 30 phone lines and 2 for signalling information. The problem is I dont want to go for E1 line directly .....Is it possible to get simulation for E1 line ... so that i can develop a system for an E1 line. -- Best Regards Shakeel Abbas