similar to: Polycom retrieve call from hold

Hi all, I'm trying to tighten things up a bit and I seem be be running into something that doesn't make sense to me. I've got 2 contexts, one for customers, and one for guests, that I include into [customers] and [default], in extensions.conf, as below: ============================================================= [default] include = dial_GUEST [customers] include = parkedcalls

I have a question about DHCP and boot server supporting more than 1 model of Polycom phones. According to Polycom "standards", Polycom phone boots up to get a DHCP address and at the same time getting a boot server string (with username and password) to logon to boot server to download SIP, bootROM and etc. That is okay if there is only one type of phone (that requires a specific SIP

Hi all, I seem to be having a strange problem with a sip trunk. On a fairly frequent basis, I'll make a call, ore receive a call, and there will be NO sound. The strange part is that both endpoints are public IP addresses so NAT isn't in play and a sniffer trace reveals that the packets simply aren't being sent. It only seems to happen on a particular trunk. The same phone

I have a couple of Polycom phones, bootrom 2.5.0, SIP 1.3.1.0056. Works great with Asterisk when I power on the phone. However, after some time, say an hour, I cannot receive calls on this phone. On Asterisk, when I do "database show", it does show the phone in there, but it cannot reach the phone. Is there a way to keep alive the connection with Polycom? Any suggestions? Thanks, --

Hi all, Lately, I've been seeing more and more instances where I get a flood of warning messages like this: [Apr 26 14:09:50] WARNING[21054] udptl.c: No UDPTL ports remaining The next thing I know, my server is dropping calls and starting to misbehave. I use fax via T.38, so I can't just turn udptl off. I could expand the port range, but I suspect that will just mask the situation.

I can't figure out how one upgrades the boot ROMs for the Polycoms. I've read the wiki, I've checked the docs, I've looked here, there, everywhere; I hoped it might be through the web interface, through DHCP... but I can't see how to do it. Suggestions? Thanks! -Ken

Hi all. I'm in the process of configuring a phone system for my family and friends. I'm wondering if I should try to implement the "Vertical Services" (http://www.nanpa.com/number_resource_info/vsc_assign) in the Asterisk dialplan, or if I should delegate those functions to the various ATA's. For example, the Sipura SPA 2002 can handle*69 internally. On the other

I got em. You want em? Anyone know how I can get these to the site listed on the Wiki? Thanks, Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050512/dfee13b3/attachment.htm

Hello all, I need the bootrom.ld file to set up some Polycoms I have Platform: Model=SoundPoint IP 330, Assembly=2345-12200-001 Rev=A I've publiched on my FTP files downloaded from http://support.polycom.com/PolycomService/support/us/support/voice/soundpoint_ip/soundpoint_ip330_320.html (3.2.3 combined and split zips) but my phones are still showing the message: "error, application is

I'm attempting to set up my SoundPoint 501 with my Asterisk server. I've configured DHCP and TFTP and successfully updated both the BootRom and SIP application. I've also created a custom cfg file for this phone's MAC address and the settings seem to be taking just fine. I can see that the phone registers with my Asterisk server but 'sip show peers' reports that the phone

When I try and park a call by transferring to 700, it audibly says to me "701", and then instead of hanging up with me, it puts me on hold. The only way to park the call is to send it blind to 700, but then I wouldn't know which parking spot the call is in! Before I send any .conf files to the list, does anyone recognize this behavior, and have a workaround? Chris Coulthurst

Hi all, Is it possible to send a SIP header to a PAP2T or SPAxxxx and cause the device to automatically answer? I can do this with my Polycom phones and would like to do it with my ATA's. Any ideas? -- Take care and have fun, Mike Diehl.

Hi all, I've cross-posted this to the -users and -biz groups. Hope that's OK. I have a customer who REALLY needs to be able to send/receive faxes reliably. I could probably get hylafax configured, but I'm not sure how reliable it is. If it is considered reliable, would someone let me know? Otherwise, is there a product/service they can buy that will allow them to fax to/from

Hi all, I have 2 servers running 1.6.2.9 and I'm about to build a third server. This suggests the possibility of doing a rolling upgrade of all of my servers. This brings up the question of what version to install and upgrade to. I don't have many upgrade opportunities, so I'd like to get as much bang for my buck. Since I've applied some custom patches to my 1.6, I'd

I was progressively upgrading this phone from 3.1.2 to 3.2.3, then to 4.0.0. v3.2.3 worked fine, but when I went to 4.0.0 (Even adding the more specific 2345-11500-040.bootrom.ld), it won't run, and just keeps rebooting. Now I've got a really nice doorstop unless someone knows how to get out of this predicament. Help! 0925003705|cfg |3|00|Beginning to provision phone 0925003705|dns

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 3261 bytes Desc: image001.jpg Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20070420/b97b0852/attachment.jpeg

I'm having problems updating my bootrom to the latest (3.2.2) version. Basically, my phone starts downloading the bootrom, but I am completely certain that it doesn't actually complete the process. It gives me an "error updating bootROM!" message, but it only takes about 2 seconds to complete the download (which, because of my WAN link and FTP server environnement I know is

Hi all. I could have sworn this working at one time... But it doesn't look like any of the functions provided by features.so is working for me. (one-touch monitoring, attended/blind transfer, etc) I've (re)loaded features.so, as well as bridge_builtin_features.so. The config file looks sane. What else should I try? TIA, -- Take care and have fun, Mike Diehl.

i recently bought an SP4000 conference phone but having problem provisioning it using ftp, every time it just hangs at "Updating initial configuration..." screen. when i switch it to tftp, it'll work fine. i though it was bootrom/firmware issue so i upgrade it to bootrom 3.2.2/sip 2.0.1 but it makes no difference. any thoughts? p.s. i'm using debian sarge proftpd 1.2.10 and the

Here is something I wrote years ago. I expect you can adjust it for your needs # cat remove_blank_vmail #!/bin/bash # remove_blank_vmail takes arguments as voicemail boxes and removes messages with audio files shorter then MINSIZE (in bytes) #---------------------------------------------------------------------- # Description: # Author: John Harragin Monroe-Woodbury CSD # Created at: Thu Nov 6