similar to: Linksys 962

Greetings list, We recently installed some Linksys SPA962 + SPA932 sidecars into a client's offices. The BLF functionality works fine, but call pickup using the BLF is something of an issue. Following the advice on voip-info.org, I configured part of their dialplan as follows: exten => _**2XX,1,Pickup(SIP/${EXTEN:2}) exten => _**2XX,n,Dial(SIP/${EXTEN:2},15,tw) exten =>

Hi all, This issue is giving me a lot of grief with my customers. I have 5 asterisk servers running in production, each one with almost 70 simultaneous calls at peak hour. Most of my customers complain that their calls drop after 20 seconds or so. After running through my cdr's, I see that the number of 20 second calls is MUCH larger than any other number. (see below) billsec count(*) 1 924

Hello, i?ve a problem i dont find the reason for. An incoming call coming over iax is connected to a Sip phone. Until the phone picks up the call i could hear moh without problems. Then the phone sets the call on hold and opens another call to another extension. The incoming call hears the Hold music and also the call to the other extension hears another moh. Everything works so far as it

Setup is: Asterisk --->NAT--> SIP Proxy I have following entry for SIP Proxy in sip.conf [Proxy] type=peer host=Static IP (NAT Firewalls public IP) username=xxxx secret=xxxxx nat=yes???????????????? canreinvite=no???????? qualify=yes Proxy sends a call and I get this error Found no matching peer or user for <NAT's Public IP:70001 NAT is using 70001 as the source port in the

Hi, I'm currently programming an interface for my Asterisk service. I've noticed an issue if someone sets up call forwarding on their sip phone. Asterisk receives a 302 "Moved Temporarily" message, and forwards the call successfully. However, the CDR is not correct. If I set up call forwarding to a mobile on extension 201, and then place a call from extension 202, the call

Hello all, I need that Asterisk Always use Reason in a CANCEL. How to do? thank you *Fran?ois * -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100521/f3a91f36/attachment.htm -------------- next part -------------- A non-text attachment was scrubbed... Name: francois.vcf Type: text/x-vcard Size: 400

Hi, How can I match an extension "ending with 3" (just an example but applicable to any other digit, including * or #)? exten => _ZX.3,n,... exten => _ZX.#,n,... (the above does not work) Can regular expressions be used in the standard dialplan (end with: "$")? Thanks, Vieri

Hi everyone, when i use the automated dial out,I found that once the zap answerd,the contex will be exectued, but i don't hope do it ,i hope when extern phone answered ,then ,the context will be exectued. Anyone can help me solve the problem! the call file is: Channel: Zap/g0/15015895665 Context: myivr RetryTime: 60 MaxRetries: 2 Waittime: 60 Extension: 808 Priority: 1 Callerid:

Hi Everyone, I am using OutCall 1.6 (latest) with Asterisk 1.6 and Windows Vista. I can originate calls see the program login nicely but when a call comes in it only shows the Name portion of the CLID and not the number hence it pulls up a new contact on Outlook. The new contact only show name and last name and no CLID Number again. So, this repeats every-time I call even if I manually enter a

Hi, Does anyone have a suggestion how I can analyze the concurrent usage of ISDN channels? A client complains about their clients sometimes getting a busy tone when trying to call them. I suspect they just need to add an additional ISDN2 line but I need some conclusive information that they are indeed maxing out their ISDN channels. Thanks, Patrick

Hello, Yesterday night we have upgraded our Asterisk from 1.2.32 to 1.4.24.1 with lipbri 1.4.10, dahdi-linux-2.2.0-rc4 and dahdi-tools-2.2.0-rc2. Libpri and dahdi is only for dahdi dummy cause of the meetme function. After the upgrade we had the problem that some Linksys spa941 phone at one location could not dial out. incoming calls to the phones works without any problem, but outbound the

An attacker is scanning my Asterisk Switch to gain illegitimate access to VoIP call functionality. Using a sip scanning tool, *it* sends REGISTERs with random identities. And when it discovers one identity subscribed in my switch, it tries to authenticate with random passwords using this user name. For the moment, I have replaced this account. And also blocked the IP it has used but each time

Hello, I am trying to create a simple IVR for testing.. What i did is to create a voice file from asterisk-gui. And i saw it created that under /var/lib/asterisk/sounds/record/ as deneme.gsm Then i tried to make a IVR menu and play that file. I tried exten=s,4,Playback(/record/deneme.gsm) exten=s,4,Playback(record/deneme.gsm) exten=s,4,Playback(deneme.gsm)

Hi everybody In advance sorry for my bad english and if my problem was already exposed (I didn't find any tips in the mailing list archive. Bad luck) I have some questions about asterisk 1.6 release : 1) how can I do a n+101 priority jumping if a SIP canal is busy ? I read that the general parameter "priorityjumping" is depreciated in the 1.6 release and I already try the

Hello I have an Asterisk 1.4 server and two XLite softphones, where Asterisk and the local XLite phone are located in a LAN behind a NAT router, and the remote XLite phone is located elsewhere on the Net behind its own NAT router: http://img252.imageshack.us/img252/3749/asterisknat.png I'm having the following issue: When the _local_ XLite calls out the remote XLite, everything works fine;

Hello everybody i am Ashish here. i am new to this mailing list. so dont know rules and regulation, just trying to post my problem of voicemail.conf Actuallt right now i am using Asterisk 1.2 on my LAN environment. i am able to call all my extension very nicely. Right now i am trying to deploying voicemail facility for all extensions, so if anybody is not present, then he/she can leave message,

Hi, One of our customers has an issue with the callee not being able to hear them. It seems to happen very frequently on one number in particular where there are about 3 IVR menus to dial through before getting to a live person. However, this does not happen on every call. Running tcpdump on the RTP packets, I can see that RTP is setting sent, but the values in the packet are all very close to

Anyone have much luck with these on ATA's? I have a few sites that use them succesfully with multi-port Audiocodes boxes, but just connected ten machines to Linksys 2102s and they are very flaky. Using u-law on a 100Mb switched network that is barely utilized, then out a T1 on a Sangoma card. Perhaps there is some tuning on the Linksys or the credit card machine itself? Going to look

Hi all, Lately, I've been seeing more and more instances where I get a flood of warning messages like this: [Apr 26 14:09:50] WARNING[21054] udptl.c: No UDPTL ports remaining The next thing I know, my server is dropping calls and starting to misbehave. I use fax via T.38, so I can't just turn udptl off. I could expand the port range, but I suspect that will just mask the situation.

Anyone else have problems with phones like SPA-922, SPA-921, etc? Inbound audio is perfect but the remote end reports audio quality issues on the audio the handset is sending out. It's not the network.... I've tried asterisk 1.2, 1.4. I've used ulaw, G726, G793 & G729. Ulaw seems to be the least problematic but its still an issue. Doesn't matter if we send the calls to the PSTN