Hello, i?ve a problem i dont find the reason for. An incoming call coming over iax is connected to a Sip phone. Until the phone picks up the call i could hear moh without problems. Then the phone sets the call on hold and opens another call to another extension. The incoming call hears the Hold music and also the call to the other extension hears another moh. Everything works so far as it should. Now the two calls are transfered so the incoming call is switched to the other extension. At this point the Moh on both channels stops which should be. The incoming call should hear the moh, or a ringing, but just silence. i do the dial command with the m option. i could paste logs if necessary. The version which runs here is a Asterisk 1.2.26.2 and a realtime configuration. best regards Steve Smith -- F?r weitere Fragen stehen wir gerne unter voip at sil.at oder 059944 - 2440 zur Verf?gung. Mit freundlichen Gr?ssen -- Stefan Schmidt Sysadmin/VOIP // sst at sil.at // Tel 059944-2440// ------------------------------------------------- SILVER SERVER GmbH // Lorenz-Mandl-Gasse 33/1 // A-1160 Wien // Fax 059944-9000 // www.sil.at // -------------------------------------------------
2008/5/13 Stefan Schmidt <sst at sil.at>:> Hello, > > i?ve a problem i dont find the reason for. An incoming call coming over > iax is connected to a Sip phone. Until the phone picks up the call i > could hear moh without problems. Then the phone sets the call on hold > and opens another call to another extension. The incoming call hears the > Hold music and also the call to the other extension hears another moh. > Everything works so far as it should. > > Now the two calls are transfered so the incoming call is switched to the > other extension. At this point the Moh on both channels stops which > should be. The incoming call should hear the moh, or a ringing, but just > silence. > > i do the dial command with the m option. > > i could paste logs if necessary. > > The version which runs here is a Asterisk 1.2.26.2 and a realtime > configuration. >I found the same issue, and a similar issue with transferring a call received out of a queue. Both issues exist in 1.2, and a friend of mine kindly re-checked this and found that it was fixed/changed in 1.4 Regards, Steve
Steve Davies schrieb:> > I found the same issue, and a similar issue with transferring a call > received out of a queue. Both issues exist in 1.2, and a friend of > mine kindly re-checked this and found that it was fixed/changed in 1.4 > > Regards, > Steve > > _______________________________________________ >but i think that this only has begun after i have done a upgrade to 1.2.26. Before i had the version 1.2.12 running without this problem. But when it?s resolved in 1.4 then the long way to changing to this version has to be walked sooner than i thought ;) thanks and regards steve -- F?r weitere Fragen stehen wir gerne unter voip at sil.at oder 059944 - 2440 zur Verf?gung. Mit freundlichen Gr?ssen -- Stefan Schmidt Sysadmin/VOIP // sst at sil.at // Tel 059944-2440// ------------------------------------------------- SILVER SERVER GmbH // Lorenz-Mandl-Gasse 33/1 // A-1160 Wien // Fax 059944-9000 // www.sil.at // -------------------------------------------------