similar to: Polycom Spectralink 8002 WiFi Phones

I have a new Polycom Spectralink 8002 and am having trouble with the configuration or the unit but I can't see what's wrong. The unit does not seem to even attempt to register with the Asterisk proxy but I can make calls to it. I have viewed the syslog from the device which it will actually write to the asterisk server so I know it can be reached. I have also run a sip debug and

Hello, I hope this isn't too off topic, but I'm attempting to set up a Spectralink 8002 Wifi phone with our Asterisk installation, and seem to be running into a brick well (more of a wall than others that have posted their experiences). My problem is that the phone boots, associates with the wireless, grabs an IP (tried static too - same thing), contacts the TFTP server for firmware, then

Hi Greeting to all you out there. I am new at asterisk, I have been working with PLMN platforms telecommunication for 5 years with NSN and Huawei. We have recently built an asterisk PBX with Trixbox and connected it to our MSS using Digium E1 cards(ISDN). Everything went smoothly as there are tons of information out there, except for the TON number. If you have worked in Telecommunication you

Hello, I need to setup system of aroud 60 DECT phones with asterisk. So far I found http://www.grandstream.com/index.php/products/ip-voice-telephony/enterprise-ip-phones/dp715_710 However is there some cheap base station(similar to GSM cell) so I can handle all DECT phones centralized and plug it inside asterisk ? Thanks, Peter

Anyone know of any *portable* SIP/WiFi handsets? Looking for a decent price:quality ratio, of possible. Keep seeing handsets for Vonage, etc., in Best Buy and the like, but I imagine it's locked to Vonage, and can't be re-appropriated. Thanks! -Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

I am using Asterisk 1.4.18 with 70 various Polycoms, 12 analog, and 18 Spectralink wireless IP phones. Most of the Spectralink phones have entries in 'sip show channels' that do not go away. None of the other phones do this. Is there anyway to remove these entries without restarting Asterisk? Any ideas on what could be done to prevent this? Example output: xxx.xxx.xxx.xxx 541

I installed Trixbox and a TDM400P with 2 FXO and 2 FXS ports and am having an annoying issue with the FXO ports. As soon as I plug either one into the phone line it's as though the line is disconnected i.e. get disconnected tone when trying to dial out, line is busy when dialling in. The CLI shows the following: trixbox1*CLI> zap show channel 4 Channel: 4 File Descriptor: 18 Span: 11*

Hi, I currently have deadtime = 15 in my smb.conf. This featured worked good to disconnect clients that have been idle for > 15 minutes in the past. With the 3.0.13 version, it seems to do nothing. As in, it just keeps the user connected indefinitely. Here is what I see when no one is currently at the office and everyone is logged off their computer. Thanks [root@spicy p]#

Hello Everyone, I want to send a few numbers (variables) when doing Asterisk AMI Originate command and then have Festival read them back to customer in the context. How should this be done? Following is my not working example and also reference on AMI Originate Command: Command: Originate Channel: SIP/123 Context: TestFestival Priority: 1 Exten: 555 Variable: $numberONE, $numberTWO, $numberTHREE

Martin: I had seen your other post and sent you a message off-list, but I never got a response. What do you feel is the most lacking that does not make it ready for a production enviroment. - I've been using a SIP deskphone in my office and usually some sort of ATA at my house, both as the primary phone. I've also had mobile phones from almost every carrier. Each one of these devices

We are planning a very large Asterisk deployment, using Wifi SIP phones. We've done installs using Spectralink and the SVP to manage congestion at the access points, but we have a client that doesn't want Spectralinks. Anyone have experience with an alternative congestion management (AP association management ?) technology with Asterisk? Anything open source that I'm not aware of?

Hi, I just moved many Polycom phones from firmware v3 to 4.0.1b. Anto-Answer simply stopped functioning. I can downgrade and make it work, upgrading kills it again. There obviously is a difference in how the newer firmware is treating this auto answer sip header. Can anybody tell me if they have Polycom firmware 4.x.x working with auto-answer/paging? Just so I know it's worth my time

Hi All, I'm running into some issues accessing a Samba server that's in turn authenticating against a Win2k3-SP1 domain controller (security=ads). I understand there were some known issues corrected in a patch, and I'm currently running 3.0.15pre2, which I understand includes that patch. (http://samba.org/~jerry/patches/post-3.0.13/winbindd_2k3sp1.patch) All was working fine

Hello list, I was going to buy this weekend a Wisip from http://www.pulverinnovations.com/, but jeff got out of stock and he wont have Wisip for the next 3 to 4 weeks. So I start searching for other wifi phones because I was really upset about it and I found IPC5000 from http://www.fahdtel.com/sip_phones.htm, I liked so much the pic that I email the guy and he send me the PDF with all the details

Hi all, Im preparing a quote for a 5 Star hotel, planning to have around 100 SIP Wifi phones for PBX operations running on 100 AccessPoints. Network is running in ARUBA Networks - AP70 access points. The initial recommendation is to go for Hitachi Wifiphones, but i would like to know from the group the recommendations. Im planning to put up Asterisk as the PBX, Please advice me the do's and

Hi All - I'm looking for a Wifi SIP phone that can do multiple line appearances. It seems the Spectralink Netlink e340 can do multiple lines, though I can't figure out how many. Does anybody know of any others that can do at least two line appearances? Thanks, Noah

We've deoplyed a number of pure VoIP wireless (wifi & proprietary) phones, but not dect. Is there a simple overview of integrating DECT phones with Asterisk somewhere? I assume the DECT basestation has a multi-account SIP VoIP interface, and the handsets are just plain old dect? Can you push configuration info to individual phones? (Are they individually addressible / configurable

Hi I;ve trixbox installed with 2 NICs. One NIC carries the MPLS-VPN traffic (only a 1 MB link without internet for carrying voice to another site) while the other NIC has a connection with public IP for internet services on that machine. the first NIC (eth0) has IP of 172.16.0.1 and is connected to router with WAN IP: 10.18.6.254 , the second IP is 203.234.82.98 (eth1). i want to have the

I have problemin g729 codec compatibility,I get the g729 module from http://asterisk.hosting.lv/ and I have Asterisk 1.4.22-3 RPM What g729 module should I download ? I already downloaded codec_g723-ast14-icc-glibc-pentium4.so [trixbox1.localdomain asterisk]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model

On 7/8/2005 11:46 AM, ggrothendieck at gmail.com wrote: > Full_Name: G. Grothendieck > Version: R version 2.1.1, 2005-06-23 > OS: Windows XP > Submission from: (NULL) (216.59.244.202) > > > > In the Windows GUI, choosing the Packages Menu, then Install and then > clicking on Cancel gives an error message saying that nothing was specified > to be installed: >