Cesar Gonzalez
2009-Jul-14 17:20 UTC
[asterisk-users] Polycom Spectralink 8002 WiFi Phones
Has anyone played with this phone? i cant seem to get it to work properly, i manged to get it registered and can make calls from it, but i havent been able to make it receive calls. Weird thing its that if you make a call from it and while you are on that call you dial its number does calls go thru in second line, but as soon as you terminate both calls it wont recieve any calls again. Heres a look from the asterisk CLI : -- Registered SIP '245' at 192.168.0.239 port 5060 expires 60 trixbox1*CLI> sip show peer 245 trixbox1*CLI> Name : 245 Secret : Set MD5Secret : Not set Context : from-internal Subscr.Cont. : Not set Language : AMA flags : Unknown Transfer mode: open CallingPres : Presentation Allowed, Not Screened Callgroup : Pickupgroup : Mailbox : 245 at device VM Extension : *97 LastMsgsSent : 32767/65535 Call limit : 50 Dynamic : Yes Callerid : "device" <245> MaxCallBR : 384 kbps Expire : 67 Insecure : no Nat : RFC3581 ACL : No T38 pt UDPTL : No CanReinvite : No PromiscRedir : No User=Phone : No Video Support: Yes Trust RPID : No Send RPID : No Subscriptions: Yes Overlap dial : Yes DTMFmode : rfc2833 LastMsg : 0 ToHost : Addr->IP : 192.168.0.239 Port 5060 Defaddr->IP : 0.0.0.0 Port 5060 Def. Username: 245 SIP Options : (none) Codecs : 0x4 (ulaw) Codec Order : (ulaw:20) Auto-Framing: No Status : OK (124 ms) Useragent : Slnk/12 Reg. Contact : sip:245 at 192.168.0.239:5060 But after a few seconds the Status goes to UNKNOWN : Auto-Framing: No Status : UNKNOWN <<------ Useragent : Slnk/12 Reg. Contact : sip:245 at 192.168.0.239:5060 This are the config files : sip_245.cfg AUTH = 245; 123456 LINE1 = 245 LINE1_PROXY = 1 LINE1_CALLID = Wireless LINE1_AUTH = 245; 123456 LINE2 = 245 LINE2_PROXY = 1 LINE2_CALLID = Wireless LINE2_AUTH = 245; 123456 sip_allusers.cfg CODECS = g711u, g711a PROXY1_TYPE = Asterisk PROXY1_ADDR = 192.168.0.253:5060 #PROXY1_KEYPRESS_2833 = enable PROXY1_KEYPRESS_INFO = disable PROXY1_HOLD_IP0 = disable #PROXY1_PRACK = enable PROXY1_REREG_SECS=3600 PROXY1_KEEPALIVE_SECS=14 #PROXY1_DOMAIN = 192.168.0.253 PROXY1_CALLID_PER_LINE = disable PROXY1_MAIL_ACCESS = *97 Access Points are Ubiquitki NanoStation 2 in WDS Mode with QoS enabled. One last thing is that while you're on a call you can ping the phone and soon as the call ends phone stops pinging. Any Ideas? Thanks
Jeff LaCoursiere
2009-Jul-14 19:08 UTC
[asterisk-users] Polycom Spectralink 8002 WiFi Phones
Search the archives - we had a big discussion about this phone about six months ago. If you make it work and want another one "I will give you special price!". j On Tue, 14 Jul 2009, Cesar Gonzalez wrote:> Has anyone played with this phone? i cant seem to get it to work > properly, i manged to get it registered and can make calls from it, but > i havent been able to make it receive calls. Weird thing its that if you > make a call from it and while you are on that call you dial its number > does calls go thru in second line, but as soon as you terminate both > calls it wont recieve any calls again. > > Heres a look from the asterisk CLI : > > -- Registered SIP '245' at 192.168.0.239 port 5060 expires 60 > trixbox1*CLI> sip show peer 245 > trixbox1*CLI> > > Name : 245 > Secret : Set > MD5Secret : Not set > Context : from-internal > Subscr.Cont. : Not set > Language : > AMA flags : Unknown > Transfer mode: open > CallingPres : Presentation Allowed, Not Screened > Callgroup : > Pickupgroup : > Mailbox : 245 at device > VM Extension : *97 > LastMsgsSent : 32767/65535 > Call limit : 50 > Dynamic : Yes > Callerid : "device" <245> > MaxCallBR : 384 kbps > Expire : 67 > Insecure : no > Nat : RFC3581 > ACL : No > T38 pt UDPTL : No > CanReinvite : No > PromiscRedir : No > User=Phone : No > Video Support: Yes > Trust RPID : No > Send RPID : No > Subscriptions: Yes > Overlap dial : Yes > DTMFmode : rfc2833 > LastMsg : 0 > ToHost : > Addr->IP : 192.168.0.239 Port 5060 > Defaddr->IP : 0.0.0.0 Port 5060 > Def. Username: 245 > SIP Options : (none) > Codecs : 0x4 (ulaw) > Codec Order : (ulaw:20) > Auto-Framing: No > Status : OK (124 ms) > Useragent : Slnk/12 > Reg. Contact : sip:245 at 192.168.0.239:5060 > > But after a few seconds the Status goes to UNKNOWN : > > Auto-Framing: No > Status : UNKNOWN <<------ > Useragent : Slnk/12 > Reg. Contact : sip:245 at 192.168.0.239:5060 > > This are the config files : > > sip_245.cfg > AUTH = 245; 123456 > LINE1 = 245 > LINE1_PROXY = 1 > LINE1_CALLID = Wireless > LINE1_AUTH = 245; 123456 > LINE2 = 245 > LINE2_PROXY = 1 > LINE2_CALLID = Wireless > LINE2_AUTH = 245; 123456 > > sip_allusers.cfg > CODECS = g711u, g711a > PROXY1_TYPE = Asterisk > PROXY1_ADDR = 192.168.0.253:5060 > #PROXY1_KEYPRESS_2833 = enable > PROXY1_KEYPRESS_INFO = disable > PROXY1_HOLD_IP0 = disable > #PROXY1_PRACK = enable > PROXY1_REREG_SECS=3600 > PROXY1_KEEPALIVE_SECS=14 > #PROXY1_DOMAIN = 192.168.0.253 > PROXY1_CALLID_PER_LINE = disable > PROXY1_MAIL_ACCESS = *97 > > Access Points are Ubiquitki NanoStation 2 in WDS Mode with QoS enabled. > > One last thing is that while you're on a call you can ping the phone and > soon as the call ends phone stops pinging. > > Any Ideas? > Thanks > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >