thr3ads.net - asterisk users - [asterisk-users] Polycom Spectralink 8002 Configuration [Feb 2009]

If this information is useful, please help other people find it:
Share via:

M Hulber

2009-Feb-24 02:07 UTC

[asterisk-users] Polycom Spectralink 8002 Configuration

I have a new Polycom Spectralink 8002 and am having trouble with the 
configuration or the unit but I can't see what's wrong.  The unit does 
not seem to even attempt to register with the Asterisk proxy but I can 
make calls to it.  I have viewed the syslog from the device which it 
will actually write to the asterisk server so I know it can be reached.  
I have also run a sip debug and see no registration traffic from the 
unit.  It also pulls the configs from the tftp server on the asterisk 
box ok.

Does anyone have a sample set of configs that work?  I have samples for 
the Polycom side but haven't seen the match on the asterisk side.  Since 
I don't even see traffic, I can't think that it's even an
authentication
issue.

When I dial from the device it just sits there, basically.

MARK.

---------- 

sip_allusers.cfg:  (I've tried most variations on theses settings)

## FOR PROXY1_TYPE = ASTERISK

#PROXY1_ADDR = 192.168.2.80:5060        # replace the ip address with 
the Asterisk Server's Address  
PROXY1_ADDR = 192.168.2.80      # replace the ip address with the 
Asterisk Server's Address  
PROXY1_KEYPRESS_2833 = enable
PROXY1_KEYPRESS_INFO = enable
PROXY1_HOLD_IP0 = disable
PROXY1_PRACK = enable
#PROXY1_REREG_SECS=3600
PROXY1_REREG_SECS=35
PROXY1_KEEPALIVE_SECS=14
#PROXY1_DOMAIN = asterisk        # Replace this with your SIP Domain's name
PROXY1_CALLID_PER_LINE = disable
PROXY1_MAIL_ACCESS = 864                 # Put Your Voice Mail Sytem's 
Pilot Number here

sip_2000.cfg:

LINE1         = 2000
LINE1_PROXY   = 1
LINE1_CALLID  = 2000
#LINE1_AUTH    = 2000; 2000

sip.conf:

; Polycom Spectralink 8002
[2000]
   type=friend
   host=192.168.3.123
   ;port=5060
   secret=2000
   username=2000
   ;fromuser=2000
   ;authuser=2000
   qualify=no   ; turned this off to stop asterisk side initiated traffic
   context=spectra_default
   dtmfmode=rfc2833
   disallow=all
   allow=ulaw
   mailbox=99 at default
   canreinvite=yes
   callgroup=1
   pickupgroup=1
   accountcode=Home
   nat=no


Syslog:

Feb 23 20:25:06 192.168.3.123 Jan  1 00:18:24.57 0090.7a0a.13f3 
(192.168.003.123) [0007] Call start, AP 0014.d1c2.70fe (-32 dBm)
Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.87 0090.7a0a.13f3 
(192.168.003.123) [0008] Number Abufs: 26
Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.87 0090.7a0a.13f3 
(192.168.003.123) [0009] Number Fbufs: 2
Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.88 0090.7a0a.13f3 
(192.168.003.123) [000a] Max Number Abufs: 359
Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.88 0090.7a0a.13f3 
(192.168.003.123) [000b] Max Number Fbufs: 33
Feb 23 20:25:11 192.168.3.123 Jan  1 00:18:29.57 0090.7a0a.13f3 
(192.168.003.123) [000c] NStat: 0014.d1c2.70fe (-30 dBm), Tx 3704, Rx 
43841, BTx 2, BRx 2766, MTx 0, MRx 0, Tx Drop 3 (0.1%), Tx Retry 96 
(2.7%), Rx Retry 19 (0.0%)
Feb 23 20:25:16 192.168.3.123 Jan  1 00:18:33.87 0090.7a0a.13f3 
(192.168.003.123) [000d] Number Abufs: 46
Feb 23 20:25:16 192.168.3.123 Jan  1 00:18:33.87 0090.7a0a.13f3 
(192.168.003.123) [000e] Number Fbufs: 3
Feb 23 20:25:16 192.168.3.123 Jan  1 00:18:34.57 0090.7a0a.13f3 
(192.168.003.123) [000f] NStat: 0014.d1c2.70fe (-36 dBm), Tx 3707, Rx 
43996, BTx 2, BRx 2773, MTx 0, MRx 0, Tx Drop 3 (0.0%), Tx Retry 96 
(0.0%), Rx Retry 19 (0.0%)
Feb 23 20:25:21 192.168.3.123 Jan  1 00:18:39.57 0090.7a0a.13f3 
(192.168.003.123) [0010] NStat: 0014.d1c2.70fe (-36 dBm), Tx 3708, Rx 
44284, BTx 2, BRx 2792, MTx 0, MRx 0, Tx Drop 3 (0.0%), Tx Retry 96 
(0.0%), Rx Retry 19 (0.0%)
Feb 23 20:25:26 192.168.3.123 Jan  1 00:18:44.36 0090.7a0a.13f3 
(192.168.003.123) [0011] Call end, AP 0014.d1c2.70fe (-36 dBm)

M Hulber

2009-Feb-24 17:04 UTC

head link

[asterisk-users] Polycom Spectralink 8002 Configuration

Since I have a partial answer for completeness:

When I moved (duplicated) the PROXYn_ADDRESS definition to the user 
specific config it then registers with the proxy.  It seems like a 
defect to me.

I'd still like to see how people have set up different users/lines using 
LINEn and LINEn_AUTH.  I'm struggling a bit with the relationship 
between the user registrations in the phone admin and the lines/users in 
the sip_xxxx.cfg and sip.conf.

M Hulber wrote:> I have a new Polycom Spectralink 8002 and am having trouble with the 
> configuration or the unit but I can't see what's wrong.  The unit
does
> not seem to even attempt to register with the Asterisk proxy but I can 
> make calls to it.  I have viewed the syslog from the device which it 
> will actually write to the asterisk server so I know it can be reached.  
> I have also run a sip debug and see no registration traffic from the 
> unit.  It also pulls the configs from the tftp server on the asterisk 
> box ok.
>
> Does anyone have a sample set of configs that work?  I have samples for 
> the Polycom side but haven't seen the match on the asterisk side. 
Since
> I don't even see traffic, I can't think that it's even an
authentication
> issue.
>
> When I dial from the device it just sits there, basically.
>
> MARK.
>
> ---------- 
>
> sip_allusers.cfg:  (I've tried most variations on theses settings)
>
> ## FOR PROXY1_TYPE = ASTERISK
>
> #PROXY1_ADDR = 192.168.2.80:5060        # replace the ip address with 
> the Asterisk Server's Address  
> PROXY1_ADDR = 192.168.2.80      # replace the ip address with the 
> Asterisk Server's Address  
> PROXY1_KEYPRESS_2833 = enable
> PROXY1_KEYPRESS_INFO = enable
> PROXY1_HOLD_IP0 = disable
> PROXY1_PRACK = enable
> #PROXY1_REREG_SECS=3600
> PROXY1_REREG_SECS=35
> PROXY1_KEEPALIVE_SECS=14
> #PROXY1_DOMAIN = asterisk        # Replace this with your SIP Domain's
name
> PROXY1_CALLID_PER_LINE = disable
> PROXY1_MAIL_ACCESS = 864                 # Put Your Voice Mail Sytem's 
> Pilot Number here
>
> sip_2000.cfg:
>
> LINE1         = 2000
> LINE1_PROXY   = 1
> LINE1_CALLID  = 2000
> #LINE1_AUTH    = 2000; 2000
>
> sip.conf:
>
> ; Polycom Spectralink 8002
> [2000]
>    type=friend
>    host=192.168.3.123
>    ;port=5060
>    secret=2000
>    username=2000
>    ;fromuser=2000
>    ;authuser=2000
>    qualify=no   ; turned this off to stop asterisk side initiated traffic
>    context=spectra_default
>    dtmfmode=rfc2833
>    disallow=all
>    allow=ulaw
>    mailbox=99 at default
>    canreinvite=yes
>    callgroup=1
>    pickupgroup=1
>    accountcode=Home
>    nat=no
>
>
> Syslog:
>
> Feb 23 20:25:06 192.168.3.123 Jan  1 00:18:24.57 0090.7a0a.13f3 
> (192.168.003.123) [0007] Call start, AP 0014.d1c2.70fe (-32 dBm)
> Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.87 0090.7a0a.13f3 
> (192.168.003.123) [0008] Number Abufs: 26
> Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.87 0090.7a0a.13f3 
> (192.168.003.123) [0009] Number Fbufs: 2
> Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.88 0090.7a0a.13f3 
> (192.168.003.123) [000a] Max Number Abufs: 359
> Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.88 0090.7a0a.13f3 
> (192.168.003.123) [000b] Max Number Fbufs: 33
> Feb 23 20:25:11 192.168.3.123 Jan  1 00:18:29.57 0090.7a0a.13f3 
> (192.168.003.123) [000c] NStat: 0014.d1c2.70fe (-30 dBm), Tx 3704, Rx 
> 43841, BTx 2, BRx 2766, MTx 0, MRx 0, Tx Drop 3 (0.1%), Tx Retry 96 
> (2.7%), Rx Retry 19 (0.0%)
> Feb 23 20:25:16 192.168.3.123 Jan  1 00:18:33.87 0090.7a0a.13f3 
> (192.168.003.123) [000d] Number Abufs: 46
> Feb 23 20:25:16 192.168.3.123 Jan  1 00:18:33.87 0090.7a0a.13f3 
> (192.168.003.123) [000e] Number Fbufs: 3
> Feb 23 20:25:16 192.168.3.123 Jan  1 00:18:34.57 0090.7a0a.13f3 
> (192.168.003.123) [000f] NStat: 0014.d1c2.70fe (-36 dBm), Tx 3707, Rx 
> 43996, BTx 2, BRx 2773, MTx 0, MRx 0, Tx Drop 3 (0.0%), Tx Retry 96 
> (0.0%), Rx Retry 19 (0.0%)
> Feb 23 20:25:21 192.168.3.123 Jan  1 00:18:39.57 0090.7a0a.13f3 
> (192.168.003.123) [0010] NStat: 0014.d1c2.70fe (-36 dBm), Tx 3708, Rx 
> 44284, BTx 2, BRx 2792, MTx 0, MRx 0, Tx Drop 3 (0.0%), Tx Retry 96 
> (0.0%), Rx Retry 19 (0.0%)
> Feb 23 20:25:26 192.168.3.123 Jan  1 00:18:44.36 0090.7a0a.13f3 
> (192.168.003.123) [0011] Call end, AP 0014.d1c2.70fe (-36 dBm)
>
>
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Jeff LaCoursiere

2009-Feb-24 22:50 UTC

head link

[asterisk-users] Polycom Spectralink 8002 Configuration

I have one of these seemingly useless devices too.  Please let me know if 
you get anywhere with it.  I bought it thinking it would be a good phone 
to take around to various hotspots and keep my extension.  Turns out it 
really wants to be only in its home "hotspot" and has some stringent 
restrictions on wifi options (WMM ONLY?!?!) that will probably not be 
present at Starbucks.  I'm pretty disgusted with it.  Bummer, too, because 
otherwise Polycom has fantastic VoIP products.

j

On Mon, 23 Feb 2009, M Hulber wrote:
> I have a new Polycom Spectralink 8002 and am having trouble with the
> configuration or the unit but I can't see what's wrong.  The unit
does
> not seem to even attempt to register with the Asterisk proxy but I can
> make calls to it.  I have viewed the syslog from the device which it
> will actually write to the asterisk server so I know it can be reached.
> I have also run a sip debug and see no registration traffic from the
> unit.  It also pulls the configs from the tftp server on the asterisk
> box ok.
>
> Does anyone have a sample set of configs that work?  I have samples for
> the Polycom side but haven't seen the match on the asterisk side. 
Since
> I don't even see traffic, I can't think that it's even an
authentication
> issue.
>
> When I dial from the device it just sits there, basically.
>
> MARK.
>
> ----------
>
> sip_allusers.cfg:  (I've tried most variations on theses settings)
>
> ## FOR PROXY1_TYPE = ASTERISK
>
> #PROXY1_ADDR = 192.168.2.80:5060        # replace the ip address with
> the Asterisk Server's Address
> PROXY1_ADDR = 192.168.2.80      # replace the ip address with the
> Asterisk Server's Address
> PROXY1_KEYPRESS_2833 = enable
> PROXY1_KEYPRESS_INFO = enable
> PROXY1_HOLD_IP0 = disable
> PROXY1_PRACK = enable
> #PROXY1_REREG_SECS=3600
> PROXY1_REREG_SECS=35
> PROXY1_KEEPALIVE_SECS=14
> #PROXY1_DOMAIN = asterisk        # Replace this with your SIP Domain's
name
> PROXY1_CALLID_PER_LINE = disable
> PROXY1_MAIL_ACCESS = 864                 # Put Your Voice Mail Sytem's
> Pilot Number here
>
> sip_2000.cfg:
>
> LINE1         = 2000
> LINE1_PROXY   = 1
> LINE1_CALLID  = 2000
> #LINE1_AUTH    = 2000; 2000
>
> sip.conf:
>
> ; Polycom Spectralink 8002
> [2000]
>   type=friend
>   host=192.168.3.123
>   ;port=5060
>   secret=2000
>   username=2000
>   ;fromuser=2000
>   ;authuser=2000
>   qualify=no   ; turned this off to stop asterisk side initiated traffic
>   context=spectra_default
>   dtmfmode=rfc2833
>   disallow=all
>   allow=ulaw
>   mailbox=99 at default
>   canreinvite=yes
>   callgroup=1
>   pickupgroup=1
>   accountcode=Home
>   nat=no
>
>
> Syslog:
>
> Feb 23 20:25:06 192.168.3.123 Jan  1 00:18:24.57 0090.7a0a.13f3
> (192.168.003.123) [0007] Call start, AP 0014.d1c2.70fe (-32 dBm)
> Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.87 0090.7a0a.13f3
> (192.168.003.123) [0008] Number Abufs: 26
> Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.87 0090.7a0a.13f3
> (192.168.003.123) [0009] Number Fbufs: 2
> Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.88 0090.7a0a.13f3
> (192.168.003.123) [000a] Max Number Abufs: 359
> Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.88 0090.7a0a.13f3
> (192.168.003.123) [000b] Max Number Fbufs: 33
> Feb 23 20:25:11 192.168.3.123 Jan  1 00:18:29.57 0090.7a0a.13f3
> (192.168.003.123) [000c] NStat: 0014.d1c2.70fe (-30 dBm), Tx 3704, Rx
> 43841, BTx 2, BRx 2766, MTx 0, MRx 0, Tx Drop 3 (0.1%), Tx Retry 96
> (2.7%), Rx Retry 19 (0.0%)
> Feb 23 20:25:16 192.168.3.123 Jan  1 00:18:33.87 0090.7a0a.13f3
> (192.168.003.123) [000d] Number Abufs: 46
> Feb 23 20:25:16 192.168.3.123 Jan  1 00:18:33.87 0090.7a0a.13f3
> (192.168.003.123) [000e] Number Fbufs: 3
> Feb 23 20:25:16 192.168.3.123 Jan  1 00:18:34.57 0090.7a0a.13f3
> (192.168.003.123) [000f] NStat: 0014.d1c2.70fe (-36 dBm), Tx 3707, Rx
> 43996, BTx 2, BRx 2773, MTx 0, MRx 0, Tx Drop 3 (0.0%), Tx Retry 96
> (0.0%), Rx Retry 19 (0.0%)
> Feb 23 20:25:21 192.168.3.123 Jan  1 00:18:39.57 0090.7a0a.13f3
> (192.168.003.123) [0010] NStat: 0014.d1c2.70fe (-36 dBm), Tx 3708, Rx
> 44284, BTx 2, BRx 2792, MTx 0, MRx 0, Tx Drop 3 (0.0%), Tx Retry 96
> (0.0%), Rx Retry 19 (0.0%)
> Feb 23 20:25:26 192.168.3.123 Jan  1 00:18:44.36 0090.7a0a.13f3
> (192.168.003.123) [0011] Call end, AP 0014.d1c2.70fe (-36 dBm)
>
>
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

Bob Pierce

2009-Feb-25 14:57 UTC

head link

[asterisk-users] Polycom Spectralink 8002 Configuration

Mark,

Are you still having trouble with your 8002? I had a lot of trouble with
mine initially, but after playing with it for about 8 hours I figured it
out. Now it works great all around our office. Our NOC technician loves
it!

There is a problem with the sample configs that Polycom publishes. I
started by un-commenting and modifying the portions that related to an
Asterisk setup. However, that seemed to be the source of my problem in
the end. I don't know if the phone simply can't parse the length of the
sample file, or if there are some errors in the sample file that I
missed. As soon as I trimmed the config file down to just the necessary
components, the phone started to work!

Bob
 
On Mon, 2009-02-23 at 21:07 -0500, M Hulber wrote:> I have a new Polycom Spectralink 8002 and am having trouble with the 
> configuration or the unit but I can't see what's wrong.  The unit
does
> not seem to even attempt to register with the Asterisk proxy but I can 
> make calls to it.  I have viewed the syslog from the device which it 
> will actually write to the asterisk server so I know it can be reached.  
> I have also run a sip debug and see no registration traffic from the 
> unit.  It also pulls the configs from the tftp server on the asterisk 
> box ok.
> 
> Does anyone have a sample set of configs that work?  I have samples for 
> the Polycom side but haven't seen the match on the asterisk side. 
Since
> I don't even see traffic, I can't think that it's even an
authentication
> issue.
> 
> When I dial from the device it just sits there, basically.
> 
> MARK.
> 
> ---------- 
> 
> sip_allusers.cfg:  (I've tried most variations on theses settings)
> 
> ## FOR PROXY1_TYPE = ASTERISK
> 
> #PROXY1_ADDR = 192.168.2.80:5060        # replace the ip address with 
> the Asterisk Server's Address  
> PROXY1_ADDR = 192.168.2.80      # replace the ip address with the 
> Asterisk Server's Address  
> PROXY1_KEYPRESS_2833 = enable
> PROXY1_KEYPRESS_INFO = enable
> PROXY1_HOLD_IP0 = disable
> PROXY1_PRACK = enable
> #PROXY1_REREG_SECS=3600
> PROXY1_REREG_SECS=35
> PROXY1_KEEPALIVE_SECS=14
> #PROXY1_DOMAIN = asterisk        # Replace this with your SIP Domain's
name
> PROXY1_CALLID_PER_LINE = disable
> PROXY1_MAIL_ACCESS = 864                 # Put Your Voice Mail Sytem's 
> Pilot Number here
> 
> sip_2000.cfg:
> 
> LINE1         = 2000
> LINE1_PROXY   = 1
> LINE1_CALLID  = 2000
> #LINE1_AUTH    = 2000; 2000
> 
> sip.conf:
> 
> ; Polycom Spectralink 8002
> [2000]
>    type=friend
>    host=192.168.3.123
>    ;port=5060
>    secret=2000
>    username=2000
>    ;fromuser=2000
>    ;authuser=2000
>    qualify=no   ; turned this off to stop asterisk side initiated traffic
>    context=spectra_default
>    dtmfmode=rfc2833
>    disallow=all
>    allow=ulaw
>    mailbox=99 at default
>    canreinvite=yes
>    callgroup=1
>    pickupgroup=1
>    accountcode=Home
>    nat=no
> 
> 
> Syslog:
> 
> Feb 23 20:25:06 192.168.3.123 Jan  1 00:18:24.57 0090.7a0a.13f3 
> (192.168.003.123) [0007] Call start, AP 0014.d1c2.70fe (-32 dBm)
> Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.87 0090.7a0a.13f3 
> (192.168.003.123) [0008] Number Abufs: 26
> Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.87 0090.7a0a.13f3 
> (192.168.003.123) [0009] Number Fbufs: 2
> Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.88 0090.7a0a.13f3 
> (192.168.003.123) [000a] Max Number Abufs: 359
> Feb 23 20:25:09 192.168.3.123 Jan  1 00:18:26.88 0090.7a0a.13f3 
> (192.168.003.123) [000b] Max Number Fbufs: 33
> Feb 23 20:25:11 192.168.3.123 Jan  1 00:18:29.57 0090.7a0a.13f3 
> (192.168.003.123) [000c] NStat: 0014.d1c2.70fe (-30 dBm), Tx 3704, Rx 
> 43841, BTx 2, BRx 2766, MTx 0, MRx 0, Tx Drop 3 (0.1%), Tx Retry 96 
> (2.7%), Rx Retry 19 (0.0%)
> Feb 23 20:25:16 192.168.3.123 Jan  1 00:18:33.87 0090.7a0a.13f3 
> (192.168.003.123) [000d] Number Abufs: 46
> Feb 23 20:25:16 192.168.3.123 Jan  1 00:18:33.87 0090.7a0a.13f3 
> (192.168.003.123) [000e] Number Fbufs: 3
> Feb 23 20:25:16 192.168.3.123 Jan  1 00:18:34.57 0090.7a0a.13f3 
> (192.168.003.123) [000f] NStat: 0014.d1c2.70fe (-36 dBm), Tx 3707, Rx 
> 43996, BTx 2, BRx 2773, MTx 0, MRx 0, Tx Drop 3 (0.0%), Tx Retry 96 
> (0.0%), Rx Retry 19 (0.0%)
> Feb 23 20:25:21 192.168.3.123 Jan  1 00:18:39.57 0090.7a0a.13f3 
> (192.168.003.123) [0010] NStat: 0014.d1c2.70fe (-36 dBm), Tx 3708, Rx 
> 44284, BTx 2, BRx 2792, MTx 0, MRx 0, Tx Drop 3 (0.0%), Tx Retry 96 
> (0.0%), Rx Retry 19 (0.0%)
> Feb 23 20:25:26 192.168.3.123 Jan  1 00:18:44.36 0090.7a0a.13f3 
> (192.168.003.123) [0011] Call end, AP 0014.d1c2.70fe (-36 dBm)
> 
> 
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

Seemingly Similar Threads

Search for more reasonably related threads

asterisk users - Feb 2009 - Polycom Spectralink 8002 Configuration

[asterisk-users] Polycom Spectralink 8002 Configuration

[asterisk-users] Polycom Spectralink 8002 Configuration

[asterisk-users] Polycom Spectralink 8002 Configuration

[asterisk-users] Polycom Spectralink 8002 Configuration

Seemingly Similar Threads